Improvement of Supplier Quality with Six Sigma Method: An Application

Yıl 2016, , 215 - 234, 01.06.2016

Gültekin Çağıl , Semra Boran , Şefik Sucu

https://doi.org/10.31795/baunsobed.645320

Öz

It is evident that the quality of parts obtained from suppliers affects the quality of the products. The improvement of supplier quality can be obtained by longterm collaboration of the company and the supplier. This collaboration not only improves the quality of the supplier and the company but also improves delivery time, cycle time, productivity and profitability. As the companies grow and the products get complex, interaction between products increase and then the lack of quality becomes more complicated problem. Therefore, statistical and non-statistical tools and methods are used for the improvement practices of supplier quality. Recently, six sigma method is mostly preferred for quality improvement practices because this method is required to use too many quality tools and allows measurement of improvement by sigma and financial value.In this study, it is shown that six sigma method can be applied to supplied component in car manufacturing.. The method is used for improvement of the dyeing failure on FRP back wall of the cars. Sigma level increased from -1.97 to 1.48 and it was saved 9.14 € per car after corrective actions are applied both to the manufacturer and the supplier

Anahtar Kelimeler

Improvement of Supplier Quality, Six Sigma Method, DMAIC

ALTI SİGMA YÖNTEMİ İLE TEDARİKÇİ KALİTESİ İYİLEŞTİRME: BİR UYGULAMA

Öz

İşletmelerin tedarik ettikleri parçaların kalitesinin ürünlerinin kalitesini etkileyeceği açıktır. İşletme ve tedarikçisi arasında uzun dönemli işbirliği ile tedarikçi kalitesinin iyileştirilmesi sağlanabilecektir. Bu durum hem tedarikçi hem de işletmenin kalitesi ile birlikte, teslim süreleri, çevrim süresi, verimlilik ve karlılıklarında da iyileşmeler sağlayacaktır. Ancak işletmeler büyüdükçe ve ürünler karmaşıklaştıkça girdilerin birbiri ile olan etkileşimi artmakta ve kalitesizlik çok daha karmaşık sorun haline gelmektedir. Dolayısı ile tedarikçi kalite problemlerinin iyileştirme çalışmalarında pek çok istatistiksel ve istatistiksel olmayan araç ve yöntemden yararlanılması söz konusu olmaktadır. Altı sigma yöntemi son yıllarda kalite iyileştirme çalışmalarında en çok tercih edilen yöntem olma özelliğindedir. Çünkü yöntem pek çok kalite aracından yararlanmayı istemekte ve iyileşmenin sigma gibi bir ölçekle ve finansal değerle ölçülmesini sağlamaktadır.Bu çalışmada çok sayıda tedarikçiye sahip bir otomobil üreticisinin tedarik edilen bir üründe Altı Sigma yöntemi uygulanabilirliği gösterilmektedir. Çalışma araç FRP arka duvarı üzerindeki boya hatalarının iyileştirilmesi ile ilgili yapılmıştır. İyileşme önerileri hem işletme hem tedarikçi işletme için uygulanarak sigma düzeyinde -1.97 den 1.48’e artış ve araç başına 9.14 € luk kazanç elde edilmiştir

Anahtar Kelimeler

Tedarikçi Kalitesi İyileştirme, Altı Sigma Yöntemi, TÖIAK

Kaynakça

• Avery, S. 2001. Linking supply chains saves Raytheon $400 million. Purchasing, 27( 30): 32–34.
• Christyanti J., Christyanti J. 2012. Improving the Quality of Asbestos Roofing at PT BBI.
• Using Six Sigma Methodology. Procedia-Social and Behavioral Sciences, 65: 306-312.
• Clark, J., Craven, E.D., Cramer, M., Corwin, S. J., Cooper, M.R. 2006. Newyork Presbyterian Hospital Uses Six Sigma to Build A Culture of Quality and Innovation. Journal of Organizational Excellence, 25(4): 11-19.
• Ettinger W., Van Kooy M. 2003. The art and science of winning physician sup- port for six sigma change. Physician Executive, 29(5): 34–38.
• EIU (The Economist Intelligence Unit). Motor Business International and Com- ponents Business International several issues. http://www.eiu.com.
• French, C. M., Duplancic, N. 2006. Ground Water Monitoring & Remediation. Journal of the Association of Ground Water Scientist and Engineers, 26( 2): 58-61.
• Frings, G. W., Grant, L. 2005. Who Moved My Sigma –Effective Implementa- tion of the Six Sigma Methodology to Hospitals. Quality and Reliability Engineering International, 21( 3): 311- 328.
• Gaikwad L.M., Teli, S.N., Majali, V.S., Bhushi, U.M. 2016. An Application of Six Sigma to Reduce Supplier Quality Cost. J. Inst. Eng. India 97(1): 93–107.
• Gijo, E.V., Scaria, J., Antony, J. 2011. Application of Six Sigma methodology to reduce defects of a grinding process. Quality and Reliability Engineering International, 27(8): 1221-1234.
• Guinane, C. S., Davis, N. H. 2004. The science of six sigma in Hospitals. The American Heart Hospital Journal, 2(1):42- 48.
• Gupta, N., Bharti, P.K. 2013. Implementation of Six Sigma for minimizing the defects rate at a yarn manufacturing company. International Journal of Engineering Research and Applications, 3(2):1000-1011.
• Habibi, A., Rezapour, A. 2015. The ability of implementation of Six Sigma in government hospitals of Babol. DU Journal, Humanities and Social Scien- ces, 8( 6), 41-63.
• Hahn, C. K., Watts, C. A. & Kim, K. Y. 1990. The supplier development prog- ram:a conceptual model. International Journal of Pur chasing & Materials Management, 2–7.
• Hoerl, R. W. 2001. Six sigma black belts: what do they need to know? Journal of Quality Technology, 33: 391–406
• Hung, H.C., Sung, M.H. 2011. Applying Six Sigma to manufacturing processes in the food industry to reduce quality cost. Scientific Research and Essays, 6(3): 580-591.
• Immaneni, A., McCombs, A., Cheatham, A. G. R. 2007. Capital one Banks on Six Sigma for Strategy Execution and Culture Transformation. Global Business and Organizational Excellence, 26( 6): 43-54.
• Ketan H., Nassir M. 2016. Aluminium hot extrusion process capability impro- vement using Six Sigma. Advances in Production Engineering & Manage- ment, 11( 1): 59–69.
• Khekale, S.N., Chatpalliwar, A.S., Thakur, N.V. 2010. Minimization of cord wastages in belt industry using DMAIC. International Journal of Engine- ering Science and Technology, 2(8): 3687-3694.
• Lazarus IR, Novicoft WM. 2004. Six sigma enters the healthcare mainstream. Managed Healthcare Executive, 14(1): 26–27.
• Li, Y. 2014. Application and Research of Six Sigma Management Method in hotel Food Safety Control. Carpathian Journal of Food Science and Techno- logy, 69-75.
• Lin, L-C, Li, Tzu-Su, Kiang J.P. 2009. A Continual Improvement Framework with Integration of CMMI and Six-sigma Model for Auto Industry. Qu- ality and Reliability Engineering International, 25: 551–569.
• Mandahawi, N., Fouad, R.H., Obeidat, S. 2012. An application of customized Lean Six Sigma to enhance productivity at a paper manufacturing com- pany. Jordan Journal of Mechanical & Industrial Engineering, 6 (1):103-109.
• MATLAB 2000. User’s Guide Version 2 The MathWorks, Inc.
• Mehdi, M.A., Nabi, A. 2007. Sıx Sıgma Implementatıon In A Manufacturing Organization. Technical Journal University of Engineering and Technology Taxila, 58-63.
• Pande, P.S., Neuman, R.P., Cavanagh, R.R. 2004. Six Sigma Yolu: GE, Motorola ve Zirvedeki Diğer Firmaların Performanslarını Yükseltme Yöntemleri, Çev: Nafiz Güder, Dharma Yayınları, İstanbul.
• Ravichandran, J. 2006. Setting Up a Quality Specification. Six Sigma Forum Ma- gazine, 5( 2): 26-30.
• Snee, R.D., Hoerl, R.W. 2007. Integrating Lean and Six Sigma-a Holistic Appro- ach. Six Sigma Forum Magazine, 6( 3): 15-21.
• Stewart, R. A., Spencer, C. A. 2006. Six-Sigma As A Strategy For Process Impro- vement On Construction Projects: A Case Study. Construction Manage- ment and Economics, 24( 4): 339-348.
• Wang, F-K., Du, T.C., Li, E.Y. 2004. Applying Six-Sigma to Supplier Develop- ment. Total Quality Management, 15(9-10): 1217-1229.