Removal of Methylene Blue Dye in Aqueous System Using Polyvinyl Alcohol and Chemically Modified-Aluminium Foil Blend

Yıl 2023, , 120 - 132, 31.12.2023

Aliyu Danmusa Mohammed , Abubakar Ibrahim Tsagero

https://doi.org/10.17678/beuscitech.1284575

Cited By: 1

Öz

Aqueous solution containing different concentrations of methylene blue dye was treated with chemically modified aluminium foil/PVA blends. There have been impressive decolourisation of the dye molecules in the aqueous system treated with the blends. Contact time and amount of composite facilitate more decolourisation of the dye solution. 97 % dye removal has been recorded at optimum conditions of the experiment. Energy dispersive X-ray fluorescence (EDXRF) analysis was used to determine the elemental composition of the aluminium foil and FTIR analysis was used to ascertain the composite formation between the foil and PVA. The blends have shown an impressive swelling property in aqueous system and poor to moderate in other organic solvents.

Anahtar Kelimeler

aluminium foil, composite, contact time, Polyvinly alcohol, Methylene blue dye

Kaynakça

• [1] A. Gbaguidi, S. Namilae, and D. Kim, “Synergy effect in hybrid nanocomposites based on carbon nanotubes and graphene nanoplatelets,” Nanotechnology, vol. 31, no. 25, p. 255704, 2020.
• [2] V. Shanmugam et al., “Potential natural polymer-based nanofibres for the development of facemasks in countering viral outbreaks,” J. Appl. Polym. Sci., vol. 138, no. 27, p. 50658, 2021.
• [3] M. Silva, F. N. Ferreira, N. M. Alves, and M. C. Paiva, “Biodegradable polymer nanocomposites for ligament/tendon tissue engineering,” J. Nanobiotechnology, vol. 18, no. 1, p. 23, 2020.
• [4] M. F. Maitz, “Applications of synthetic polymers in clinical medicine,” Biosurf. Biotribol., vol. 1, no. 3, pp. 161–176, 2015.
• [5] X. Tang et al., “Polymeric biomaterials in tissue engineering and regenerative medicine,” in Natural and Synthetic Biomedical Polymers, Elsevier, 2014, pp. 351–371.
• [6] M. S. B. Husain, A. Gupta, B. Y. Alashwal, and S. Sharma, “Synthesis of PVA/PVP based hydrogel for biomedical applications: a review,” Energy Sources Recovery Util. Environ. Eff., vol. 40, no. 20, pp. 2388–2393, 2018.
• [7] A. Kumar and S. S. Han, “Enhanced mechanical, biomineralization, and cellular response of nanocomposite hydrogels by bioactive glass and halloysite nanotubes for bone tissue regeneration,” Mater. Sci. Eng. C Mater. Biol. Appl., vol. 128, no. 112236, p. 112236, 2021.
• [8] A. Kumar, Y. S. Negi, N. K. Bhardwaj, and V. Choudhary, “Synthesis and characterization of methylcellulose/PVA based porous composite,” Carbohydr. Polym., vol. 88, no. 4, pp. 1364–1372, 2012.
• [9] C. C. Thong, D. C. L. Teo, and C. K. Ng, “Application of polyvinyl alcohol (PVA) in cement-based composite materials: A review of its engineering properties and microstructure behavior,” Constr. Build. Mater., vol. 107, pp. 172–180, 2016.
• [10] M. Aslam, M. A. Kalyar, and Z. A. Raza, “Polyvinyl alcohol: A review of research status and use of polyvinyl alcohol based nanocomposites,” Polym. Eng. Sci., vol. 58, no. 12, pp. 2119–2132, 2018.
• [11] X. Gao, C. Guo, J. Hao, Z. Zhao, H. Long, and M. Li, “Adsorption of heavy metal ions by sodium alginate based adsorbent-a review and new perspectives,” Int. J. Biol. Macromol., vol. 164, pp. 4423–4434, 2020.
• [12] Y. Zvulunov and A. Radian, “Alginate composites reinforced with polyelectrolytes and clay for improved adsorption and bioremediation of formaldehyde from water,” ACS ES T Water, vol. 1, no. 8, pp. 1837–1848, 2021.
• [13] B. Aderibigbe and B. Buyana, “Alginate in wound dressings,” Pharmaceutics, vol. 10, no. 2, p. 42, 2018.
• [14] M. Bahadoran, A. Shamloo, and Y. D. Nokoorani, “Development of a polyvinyl alcohol/sodium alginate hydrogel-based scaffold incorporating bFGF-encapsulated microspheres for accelerated wound healing,” Sci. Rep., vol. 10, no. 1, p. 7342, 2020.
• [15] O. A. Buryakovskaya, E. A. Meshkov, M. S. Vlaskin, E. I. Shkolnokov, and A. Z. Zhuk, “Utilization of aluminum waste with hydrogen and heat generation,” IOP Conf. Ser. Mater. Sci. Eng., vol. 250, p. 012007, 2017.
• [16] S. Ibrahim, I. Fatimah, H.-M. Ang, and S. Wang, “Adsorption of anionic dyes in aqueous solution using chemically modified barley straw,” Water Sci. Technol., vol. 62, no. 5, pp. 1177–1182, 2010.
• [17] A. K. Narayana Swamy and E. Shafirovich, “Conversion of aluminum foil to powders that react and burn with water,” Combust. Flame, vol. 161, no. 1, pp. 322–331, 2014.
• [18] M. H. Karaoğlu and M. Uğurlu, “Studies on UV/NaOCl/TiO2/Sep photocatalysed degradation of Reactive Red 195,” J. Hazard. Mater., vol. 174, no. 1–3, pp. 864–871, 2010.
• [19] A. D. Mohammed, D. A. Young, and H. C. M. Vosloo, “Synthesis of high-performance superabsorbent glycerol acrylate-cross-linked poly (acrylic acid),” Res. Chem. Intermed., vol. 43, no. 4, pp. 2187–2200, 2017.