High Temperature Oxidation Behavior of Boron Carbide

Yıl 2018, , 151 - 156, 30.11.2018

Esra Dokumacı , İlker Özkan , Ali Bülent Önay

https://doi.org/10.30728/boron.365224

Cited By: 1

Öz

The aim of this study is to
determine the high temperature cyclic oxidation behavior of boron carbide (B₄C)
in air atmosphere at elevated temperatures. For this purpose, as-received
powders were firstly characterized by XRD and SEM. Boron carbide powders were
shaped by cold pressing for oxidation studies. Tests were performed in air
atmosphere at 800˚C and 1000˚C for 5, 10, 15 and 20 hours. After each oxidation
test, the mass changes were measured. XRD, SEM and EDS analyses were conducted
on the oxidized samples and the results were discussed. It was observed that
cyclic oxidation behaviors of the samples depended on temperature and time.
Based on the analyses results and the microstructure observations,
volatilization of B₂O₃ had significant effect on the
oxidation of the samples as the temperature increased.

Anahtar Kelimeler

High temperature oxidation, cyclic oxidation

Kaynakça

• Hou X., Chou K.C., Quantitative investigation of oxidation behavior of boron carbide powders in air, Journal of Alloys and Compounds, 573, 182–186, 2013.
• Lavrenko V.A., Gogotsi Y.G., Influence of oxidation on the composition and structure of the surface layer of hot-pressed boron carbide, Oxidation of Metals, 29 (3/4), 193-202, 1988.
• Thévenot F., Boron carbide a comprehensive review, Journal of the European Ceramic Society, 6, 205-225, 1990.
• Kılıçarslan A., Toptan F., Kerti I., Piskin S., Oxidation of boron carbide particles at low temperatures, Materials Letters, 128, 224–226, 2014.
• Frage N., Levin L., Dariel M.P., The effect of the sintering atmosphere on the densification of B4C ceramics, Journal of Solid State Chemistry, 177, 410–414, 2004.
• Erdemir A., Bindal C., Zuiker C., Savrun E., Tribology of naturally occurring boric acid films on boron carbide, Surface and Coatings Technology, 86-87, 507-510, 1996.
• Li Y.Q., Qiu T., Oxidation behaviour of boron carbide powder, Materials Science and Engineering A, 444, 184–191, 2007.
• Steinbrück M., Oxidation of boron carbide at high temperatures, Journal of Nuclear Materials, 336, 185–193, 2005.
• Lavrenko V.A., Pomytkin A.P., Kislyj P.S., Grabchuk B.L., Kinetics of high-temperature oxidation of boron carbide in oxygen, Oxidation of Metals, 10 (2), 85-95, 1976.
• Litz L.M., Mercuri R.A., Oxidation of boron carbide by air, water, and air-water mixtures at elevated temperatures, Journal of Electrochemical Society, 110 (8), 921-925, 1963.
• Lee D.B., Lee Y.C., Kim D.J., The oxidation of TiB2 ceramics containing Cr and Fe, Oxidation of Metals, 56, 177-189, 2001.
• Parthasarathy T.A., Rapp R.A., Opeka M., Kerans R.J., A model for the oxidation of ZrB2, HfB2 and TiB2, Acta Materialia, 55, 5999–6010, 2007.
• Irving R.J., Worsley I.G., The oxidation of TiB2 and ZrB2 at high temperatures, Journal of the Less-Common Metals, 16, 103-112, 1968.
• E.T. Turkdoğan, Physical chemistry of high temperature technology, Academic Press, 1980.
• Kofstad P, High temperature oxidation corrosion, England: Elsevier Applied Science Publishers, 1998.