Reducing Soft-Story Effects in Reinforced Concrete Frames with New Generation Infill Walls

Yıl 2024, Cilt: 26 Sayı: 77, 192 - 199, 27.05.2024

Prost Iverden Balenda Bakala , İbrahim Serkan Mısır , Ömer Aldemir

https://doi.org/10.21205/deufmd.2024267701

Öz

Past earthquakes have shown that many buildings with infill walls, especially due to the walls being removed for various purposes on the first floor, exhibit soft-story/weak story mechanisms due to increased lateral displacement demand during earthquakes and building collapse on that floor. The aim of the present study is to investigate the effect of new generation infill walls, introduced as a new concept in the Turkish Building Earthquake Code-2018, in reducing the soft story formation in reinforced concrete frames. Within the scope of the study, nonlinear analyses were performed on numerical models of reinforced concrete frames with only the upper stories infilled in order to force the models to exibit soft-story irregularities. The frame and infill wall parameters used in the analysis were obtained from the quasi-static tests on planar reinforced concrete frames with and without infill walls. Numerical simulations showed that the use of new generation infill walls has the potential to reduce the soft story formation even in the buildings with unfilled first stories, compared to fully infilled model cases.

Anahtar Kelimeler

Infilled reinforced concrete frames, earthquake safety, soft storey irregularity, new generation infill walls, flexible wall

Betonarme Çerçevelerde Yumuşak Kat Etkilerinin Yeni Nesil Dolgu Duvarlar ile Azaltılması

Öz

Çeşitli amaçlarla özellikle zemin kat dolgu duvarları kaldırılmış çok sayıda binanın depremler sırasında bu katta artan yanal deplasman talebiyle yumuşak kat/zayıf kat mekanizmaları sergilediği ve binanın bu kat üzerine çöktüğü geçmiş depremlerden bilinmektedir. Sunulan çalışmanın amacı, 2018 Türkiye Bina Deprem Yönetmeliği’nde de kabul gören yeni nesil dolgu duvarların betonarme çerçevelerde yumuşak kat oluşumunu azaltmadaki etkilerini araştırmaktır. Çalışma kapsamında dolgulu betonarme çerçeve modelleri üzerinde doğrusal olmayan analizler gerçekleştirilmiş, göz önüne alınan çok katlı düzlemsel çerçevelerde yumuşak kat etkilerinin belirgin hale gelmesi için modellerde yalnızca üst katların açıklıklarında dolgu duvar etkisi dikkate alınmıştır. Analizde kullanılan çerçeve ve dolgu duvar parametreleri, dolgu duvarlı ve dolgu duvarsız düzlemsel betonarme çerçeveler üzerinde daha önce yürütülen yarı statik testlerden elde edilmiştir. Simülasyonlar, geleneksel dolgu duvar durumuna kıyasla yeni nesil duvar kullanımının, ilk katları dolgusuz binalarda bile yumuşak/zayıf kat oluşumunu azaltma potansiyeline sahip olduğunu göstermektedir.

Anahtar Kelimeler

Dolgulu betonarme çerçeveler, deprem güvenliği, yumuşak kat düzensizliği, yeni nesil dolgu duvarlar

Kaynakça

• Rodrigues, H., Varum, H., and Costa, A., 2010. Simplified Macro-Model for Infill Masonry Panels, Journal Earthquake Engineering, Vol. 14, No. 3, pp 390-416
• Mohammadi, M., and Akrami, V., 2010. Application of Frictional Sliding Fuse in Infilled Frames, Fuse Adjustment and Influencing Parameters, Structural Engineering Mech, Vol. 36, No. 6, pp 715-727
• Dimova, S.L. and Negro, P., 2005. Seismic Assessment of an Industrial Frame Structure Designed According to Eurocodes. Part 1: Experimental Tests and Their Numerical Simulation, Eng Struct, Vol. 27, pp 709-723
• Yan, P.L., Sun, B.T., and Zhang, H.Y., 2014. Seismic damage to RC frame teaching building in Lushan MS7.0 Earthquake, China Civil Eng J, Vol. 47, pp 24-28
• Ricci, P., De Risi, M.T., Verderame, G.M., Manfredi, G., 2013. Influence of Infill Distribution and Design Typology on Seismic Performance of Lowand Mid-Rise RC Buildings, Bull Earthq Eng, Vol. 11, pp 1585-1616
• Hashemi, A., and Mosalam, K.M., 2007. Seismic Evaluation of Reinforced Concrete Buildings Including Effects of Infill Masonry Walls, Pacific Earthquake Engineering Research Center-PEER, USA, No: 100, 268 p.
• Negro P. and Verzeletti G., 1996. Effect of Infills on the Global Behavior of RC Frames: Energy Considerations from Pseudodynamic Tests, Earthq Eng Struct Dyn, Vol. 25, pp 753-773
• Negro, P., Colombo, A., 1997. Irregularities Induced by Nonstructural Masonry Panels in Framed Buildings, Eng Struct, Vol. 17, No.7, pp 576585
• Dolsek, M., and Fajfar, P., 2008. The Effect of Masonry Infills on The Seismic Response of a Four-Storey Reinforced Concrete Frame: A Deterministic Assessment, Eng Struct, Vol. 30, pp 1991-2001
• Stavridis, A., Shing, P.B., 2010. Finite Element Modeling of Nonlinear Behavior of Masonry Infilled RC Frames, J Struct Eng, Vol. 136, No. 3 , pp 285-296
• Kaushik, H.B., Rai, D.C., Jain, S.K., 2009. Effectiveness of Some Strengthening Options for Masonry-Infilled RC Frames with Open First Story, J Struct Eng, Vol. 135, No. 8, pp 925-937
• Misir, I.S., Ozcelik, O., Girgin, S.G., and Kahraman, S., 2012. Experimental Work on Seismic Behavior of Various Types of Masonry Infilled RC Frames, Struct Eng & Mech, Vol. 44, No. 6, December, pp 763-774
• Misir, I.S., Ozcelik, O., Girgin, S.C., and Yucel, U., 2016. The Behavior of Infill Walls in RC Frames Under Combined Bidirectional Loading, J Earthq Eng, Vol. 20, No. 4, pp 559-586
• Misir, I.S., 2015. Potential Use of Locked Brick Infill Walls to Decrease Soft-Story Formation in Frame Buildings, J Perform Constr Facil, Vol. 29, No. 5, 04014133
• DIANA FEA BV. DIANA Finite Element Analysis, User's Manual release 10.3. Delft, The Netherlands.
• Yakut, A., Sucuoğlu, H., Binici, B., Canbay, E., Donmez, C., İlki, A., ... & Ay, B. Ö., 2021. Performance of structures in İzmir after the Samos Island earthquake. Bulletin of Earthquake Engineering, 1-26.
• Maekawa, K., Okamura, H., & Izumo, J., 1987. Reinforced concrete plate element subjected to cyclic loading, IABSE Colloquium Delft, August, 575–590.
• DIANA User’s Manual Release 10.1 www.dianafea.com
• Menegotto, M. and Pinto E. 1973. Method of Analysis for Cyclically Loaded Reinforced Concrete Plane Frames Including Changes in Geometry and Non-Elastic Behaviour of Elements Under Combined Normal Force and Bending. IABSE Symposium on the Resistance and Ultimate Deformability of Structures Acted on by Well-Defined Repeated Loads. Lisbon, Portugal.
• Ngekpe B., 2016. Application of Total-Strain Crack Model in Finite Element Analysis for Punching Shear at Edge Connection, vol. 06.
• FIB, in: fib Model Code for Concrete Structures 2010, International Federation for Structural Concrete (fib), Lausanne, 2013, https://doi.org/10.1002/9783433604090.
• Preti, M., Bettini, N., and Plizzari, G., 2012. Infill walls with sliding joints to limit infill-frame seismic interaction: Large-scale experimental test, Journal of Earthquake Engineering 16(1), 125–141.