Environmental Methods and Media Used to Clean Paint/Varnish on Wooden Surfaces

Yıl 2022, Cilt: 10 Sayı: 4, 2079 - 2092, 25.10.2022

İzham Kılınç , Mehmet Budakçı , Mustafa Korkmaz

Öz

Although the wood material, which has a natural and organic structure, has some properties that will protect itself against external factors, it loses these properties over time. For this reason, it must be impregnated and/or its surfaces must be covered with protective layers (paint/varnish). These protective layers can lose their protective properties over time, reducing the strength and service life of the material. In addition, this situation may cause wood material to look bad aesthetically. For this reason, it is necessary to remove the layers that have lost their protective function, to perform the necessary maintenance and to re-apply a protective layer. Although it is an exceedingly difficult and laborious process to clean the worn protective layers without damaging the wood surface and the environment, there are many methods and tools used today. In this study, environmentally friendly methods and blasting media that are frequently preferred for cleaning the protective layers on wooden material surfaces are discussed. The main purpose of this paper is to compile the knowledge and experience obtained from the studies in the field of wood surface cleaning and thus to facilitate the researchers and practitioners to reach the literature.

Anahtar Kelimeler

Wood material, Paint, Varnish, Surface cleaning methods, Blasting media

Ahşap Yüzeylerde Boya/Vernikleri Temizlemek İçin Kullanılan Çevreci Yöntem ve Medyalar

Öz

Doğal ve organik bir yapıya sahip olan ağaç malzeme her ne kadar dış etkilere karşı kendisini koruyacak birtakım özelliklere sahip olsa da harici etkilere karşı uzun süre dayanamaz. Bu nedenle ya emprenye edilmekte ya da yüzeyleri koruyucu katmanla (boya/vernik) kaplanmaktadır. Ağaç malzeme yüzeylerine uygulanan bu koruyucu katmanlar, zamanla koruyucu özelliğini yitirebilmekte, malzemenin dayanımını, kullanım ömrünü azaltmakta ve estetik olarak kötü görüntüye neden olabilmektedir. Bu yüzden, eskimiş koruyucu katmanların ahşap yüzeylerinden kaldırılarak gerekli bakımların yapılması ve yeniden koruyucu katman uygulanması gerekmektedir. Koruyucu katmanların ağaç malzeme yüzeyine ve çevreye zarar vermeden temizlenmesi oldukça zor ve zahmetli bir işlem olmakla birlikte, günümüzde kullanılan birçok yöntem ve temizleme gereci bulunmaktadır. Bu çalışmada, ağaç malzeme yüzeylerindeki koruyucu katmanların temizliğinde sıkça tercih edilen çevreye duyarlı yöntem ve temizleme medyaları ele alınmıştır. Bu çalışmanın temel amacı, ahşap yüzey temizliği alanındaki araştırmalar ile elde edilen bilgi ve tecrübeleri topluma tek kaynak üzerinden aktarmak ve böylece araştırmacı ve uygulayıcıların literatüre ulaşmasını kolaylaştırmaktır.

Anahtar Kelimeler

Ağaç malzeme, Boya, Vernik, Yüzey temizleme yöntemleri, Kumlama medyaları

Kaynakça

• [1]M. Budakçı ve M. Karamanoğlu, “Açık hava koşullarının odunun bazı fiziksel özelliklerine etkileri,” Kastamonu Üniversitesi Orman Fakültesi Dergisi, c. 14, s. 1, ss. 37–47, 2014.
• [2]Y. Örs ve H. Keskin, Ağaç Malzeme Bilgisi, 1. baskı, Ankara, Türkiye: Gazi Kitabevi, 2000, ss. 199.
• [3]A. Sönmez ve M. Budakçı, Ağaç işlerinde Üstyüzey İşlemleri II, Ankara, Türkiye: Gazi Kitabevi, 2005.
• [4]G. X. Chen, T. J. Kwee, K. P. Tan, Y. S. Choo, and M. H. Hong, “Laser cleaning of steel for paint removal,” Appl. Phys. A Mater. Sci. Process., vol. 101, no. 2, pp. 249–253, 2010, doi: 10.1007/s00339-010-5811-0.
• [5]T. Foster, O. Malavallon, and S. Visaisouk, “Environmentally safe and effective processes for paint removal,” AGARD, France, Rep. N95-32165 11-31. Apr. 7, 1993.
• [6]H. İ. Kesik vd., “Ahşap malzeme restorasyonunda yüzey temizleme yöntemleri,” Selcuk Univ. J. Eng. Sci., ss. 1100–1113, 2016.
• [7]S. Stratford, “Dry ice blasting for paint stripping and surface preparation,” Metal Finishing, vol. 98, no 6, pp. 493–499, 2000.
• [8]R. Sherman, “Cleaning with Carbon Dioxide Snow,” Handbook for Critical Cleaning, Usa: Copyright Clearance Center, 2019, pp. 431–444.
• [9]Anonymous. (2022, Jan 06). Waterjet and wet abrasıve blast cleanıng methods explaıned [Online]. Available: https://sspc.org/learning_center/waterjet-and-wet-abrasive-blast-cleaning-methods-explained/
• [10]K. M. Foley ve T. Weaver, “An update on soft grit blast cleaning with corncob grit,” Abrasive Engineering Society, ABD, Rep. 107-116, 1981.
• [11]D. Herbert, “Blast finishing,” Metal Finishing., vol. 97, no. 1, pp. 93–100, 1999, doi: 10.1016/s0026-0576(99)80007-5.
• [12]W. G. Howells, “İncreasing waterjet efficiency by use of water-soluble additives,” Proceedings of the 10th American Waterjet Conference, Usa 1999, pp. 70–71.
• [13]Anonim. (2022, 06 Ocak). Zemin ve ahşap bakımı [Çevrimiçi]. Erişim: https://teakdeck.tk/deck-bakimi/
• [14]Anonim. (2021, 14 Mayıs). Sulu kumlama sistemleri [Çevrimiçi]. Erişim: https://www.saykar.net/sulu_kumlama.%0A%0A.
• [15]O. Malavallon, “Paint removal principles,” AGARD, France, Rep. N95-32165 11-31, 1995.
• [16]S. Soncu, “Plastik parçalarda boya öncesi yüzey hazırlık prosesinin geliştirilmesi,” Yüksek lisans, Uludağ Üniversitesi, Bursa, Bursa, Türkiye 2019.
• [17]E. Uhlmann and R. Hollan, “Resource efficient ınline cleaning processes,” Procedia CIRP, pp. 102–121, 2012.
• [18]E. Uhlmann and R. Hollan, “Blasting with solid carbon dioxide – ınvestigation of thermal and mechanical removal mechanisms,” Procedia CIRP, vol. 26, pp. 544–547, 2015.
• [19]Anonim. (2021, 1 Haziran). Kuru buz ile yüzey temizleme yöntemi [Çevrimiçi]. Erişim: http://www.lyindustrial.com/kuru-buzla-temizleme-yontemi/
• [20]Anonymous. (2021, Jun 01). Abrasive blasters [Online]. Available: https://www.graco.com/us/en/contractor/products/surface-preparation/abrasive-blasters.html
• [21]P. Mardikan, C. C., W. C., and H. P., “An evaluation of ınter-laboratory reproducibility for quantitative xrf of historic copper alloys,” Metal 2010: Proceedings of the Interim Meeting of the ICOM-CC Metal Working Group, South Carolina Usa 2010, pp. 178–188.
• [22]Anonymous. (2021, Jun 07). Blast media [Online]. Available: https://surfaceprep.com/product-category/abrasives/blast-media/
• [23]P. W. Kopf, J. Cheney, ve J. Martin, “Paint removal from composites and protective coating development,” ABD, Rep. AD-A249 238, 1991.
• [24]K. E. Abbott, “Dry media blasting for the removal of paint coatings on aerospace surfaces,” Metal Finishing, vol. 94, no. 7, pp. 33–35, 1996.
• [25]R. L. Lemaster, A. J. Shih, and Z. Yu, “Blasting and erosion wear of wood using sodium bicarbonate and plastic media,” For. Prod. J., vol. 55, no. 5, pp. 59–64, 2005.
• [26]M. Van De Mark, (2021, Apr 04). Removing defects through flow, leveling PCI Magazine RSS, 2003. [Online]. Available: https://www.pcimag.com/articles/93846-removing-defects-through-flow-leveling
• [27]J. D. Hansink, “An ıntroduction to abrasives for protective coating removal operations,” Journal of Protective Coatings & Linings, vol. 17, no. 4, pp. 66–73, 2000.
• [28]Anonim. (2021, 14 Haziran). Biyolojik tozlar [Çevrimiçi]. Erişim: https://www.bio-powder.com/en/apricot-stone
• [29]N. F. Veloz, “Practical aspects of using walnut shells for cleaning outdoor sculpture,” APT Bull., vol. 25, no. 3/4, pp. 70–76, 1993.
• [30]Anonymous. (2021, Jun 20). Blasting media and abrasives specifications [Online]. Available:https://www.globalspec.com/specsearch/searchform/materials_chemicals_adhesives/abrasives_abrasive_products/blast_media_blasting_abrasives.
• [31]P. Tangestanian, M. Papini, and J. K. Spelt, “Starch media blast cleaning of artificially aged paint films,” Wear, vol. 248, no. 1–2, pp. 128–139, 2001.
• [32]T. Foster, “Dry media blasting with wheat starch,” AGARD, France, 1995.
• [33]B. Djurovic, É. Jean, M. Papini, P. Tangestanian, and J. K. Spelt, “Coating removal from fiber-composites and aluminum using starch media blasting,” Wear, vol. 224, no. 1, pp. 22–37, 1999.
• [34]Anonymous. (2021, Jul 24). Nutshell granules [Online]. Available: https://www.kuhmichel.com/en/products/nutshell-granules/.%0A%0A
• [35]Anonymous. (2021, Jul 24). Restoration & remedation [Online]. Available: https://www.randrmagonline.com/articles/86397-historical-restoration-with-crushed-walnut-shells
• [36]Anonim. (2021, 24 Temmuz). Kabuk granülleri [Çevrimiçi]. Erişim: https://www.organikyakit.com/urun-detaylari/kabuk-granulleri.
• [37] Composition Materials Co. (2021, Jul 24). Material safety data sheet [Online]. Available: https://compomat.com/wp-content/uploads/2013/01/MSDS-Corn-Cob-Grit.pdf
• [38]Flowspec Industrial Limited. (2021, Jul 24) Crushed walnut shell [Online]. Available: http://www.walnutshellpowder.com/company.html
• [39]C. M. Co. (2021, Sep 5) Abrasive blast media [Online]. Available: https://compomat.com/
• [40]Anonymous. (2021, Sep 05). Glass and Cob Blasting [Online]. Available: https://doyleloghomeservices.com/corn-cob-blasting/#
• [41] Anonymous. (2021, Sep 05). Western Log Home Supply [Online]. Available: https://www.westernloghomesupply.com/kernel-corn-cob-media-blaster-log-cabins homes.html
• [42]G. X. Chen, T. J. Kwee, K. P. Tan, Y. S. Choo, and M. H. Hong, “Laser cleaning of steel for paint removal,” Appl. Phys. A Mater. Sci. Process., vol. 101, no. 2, 2010, doi: 10.1007/s00339-010-5811-0.
• [43]J. H. Scholten, J. M. Teule, V. Zafiropulos, and R. M. A. Heeren, “Controlled laser cleaning of painted artworks using accurate beam manipulation and on-line LIBS-detection,” J. Cult. Herit., vol. 1, no. 2, 2000.
• [44]S. Siano and R. Salimbeni, “The gate of paradise: physical optimization of the laser cleaning approach,” Stud. Conserv., vol. 46, no. 4, pp. 269–281, 2001.
• [45]A. Zanini, V. Trafeli, and L. Bartoli, “The laser as a tool for the cleaning of cultural heritage,” IOP Conf. Ser. Mater. Sci. Eng., vol. 364, no. 1, 2018.
• [46]S. Georgiou, V. Zafiropulos, V. Tomari, and C. Fotakis, “Mechanistic aspects of excimer laser restoration of painted artworks,” Laser Phys., vol. 8, no. 1, pp. 307–312, 1998.
• [47]W. N. Schmitz, “Baring it all, coatings removal options uncovered,” 2015.
• [48]M. J. J. Schmidt, L. Li, and J. T. Spencer, “An investigation into the feasibility and characteristics of using a 2.5 kW high power diode laser for paint stripping,” J. Mater. Process. Technol., vol. 138, no. 1–3, pp. 109–115, 2003.
• [49]D. Bäuerle, “Laser processing and chemistry,” Laser Process. Chem., pp. 13–38, 2011.
• [50]W. N. Schmitz, “CO2 pellets blasting for paint stripping/coatings removal,” 1st Ann. Int. Workshop on Solvent Substitution, pp. 11–13, 1990.