In this study; pumice, marble dust and lime were mixed with high plasticity clay in order to investigate their effects on the engineering properties of clay. Atterberg’s limits, standard compaction, unconfined pressure test, swelling experiments were performed by adding pumice, marble dust and lime to clay in pre-defined ratios. After determining the optimum dosages for each additive, samples prepared at maximum dry density and optimum water contents were cured during 7, 28 and 90 days. Unconfined pressure tests, triaxial pressure tests and CBR tests were performed on those samples. SEM, X-Ray and chemical analysis were also performed. It was observed that the additives used improved the engineering properties of high plasticity clay.
Soil Stabilization Clay Waste Material Geotechnical Properties
Birincil Dil | İngilizce |
---|---|
Konular | Mühendislik Uygulaması |
Bölüm | Research Articles |
Yazarlar | |
Yayımlanma Tarihi | 17 Eylül 2024 |
Gönderilme Tarihi | 28 Haziran 2024 |
Kabul Tarihi | 3 Eylül 2024 |
Yayımlandığı Sayı | Yıl 2024 Cilt: 11 Sayı: 3 |