DETERMINING EFFECTS OF HEAT TRANSFER FINS ON THE SOLIDIFICATION PROCESS OF PCM AND NANO-PCM WITH A RECTANGULAR COOLER

Yıl 2019, , 263 - 274, 30.12.2019

Beşir Kok

https://doi.org/10.36222/ejt.642684

Cited By: 1

Öz

In this study, the performances of
the heat transfer fins during the solidification processes of PCM and nano-PCMS(Al₂O₃
- CuO)  were investigated. These two
situations were considered for both with and without fins. Two different heat
transfer fins were considered in the study. 
The investigation was carried out using both experimental (for Base-PCM)
and numerical methods. The results showed that the effects of heat transfer
fins were limited due to the overcooling effect of PCMs. The solidification
process of Base-PCM in the heat storage tank ended in 10 minutes, while the
solidification time of the PCM was determined as 11 minutes by using the Fin 1
design. The solidification process in the heat storage tank with nano-PCM (CuO)
was realized in 13 minutes with the Fin 1 design.

Anahtar Kelimeler

PCM; Fin; TES; Solidification

Kaynakça

• [1] Aly KA, El-Lathy AR, Fouad MA (2019) Enhancement of solidification rate of latent heat thermal energy storage using corrugated fins. J Energy Storage 24:100785 . doi: 10.1016/j.est.2019.100785
• [2] Jmal I, Baccar M (2018) Numerical investigation of PCM solidification in a finned rectangular heat exchanger including natural convection. Int J Heat Mass Transf 127:714–727 . doi: 10.1016/j.ijheatmasstransfer.2018.08.058
• [3] Liu S, Peng H, Hu Z, et al (2019) Solidification performance of a latent heat storage unit with innovative longitudinal triangular fins. Int J Heat Mass Transf 138:667–676 . doi: 10.1016/j.ijheatmasstransfer.2019.04.121
• [4] Sheikholeslami M (2018) Numerical modeling of nano enhanced PCM solidification in an enclosure with metallic fin. J Mol Liq 259:424–438 . doi: 10.1016/j.molliq.2018.03.006
• [5] Mahdi JM, Nsofor EC (2018) Solidification enhancement of PCM in a triplex-tube thermal energy storage system with nanoparticles and fins. Appl Energy 211:975–986 . doi: 10.1016/j.apenergy.2017.11.082
• [6] Mahdi JM, Lohrasbi S, Ganji DD, Nsofor EC (2018) Accelerated melting of PCM in energy storage systems via novel configuration of fins in the triplex-tube heat exchanger. Int J Heat Mass Transf 124:663–676 . doi: 10.1016/j.ijheatmasstransfer.2018.03.095
• [7] Sefidan AM, Sojoudi A, Saha SC, Cholette M (2017) Multi-layer PCM solidification in a finned triplex tube considering natural convection. Appl Therm Eng 123:901–916 . doi: 10.1016/j.applthermaleng.2017.05.156
• [8] Hosseinzadeh K, Alizadeh M, Tavakoli MH, Ganji DD (2019) Investigation of phase change material solidification process in a LHTESS in the presence of fins with variable thickness and hybrid nanoparticles. Appl Therm Eng 152:706–717 . doi: 10.1016/j.applthermaleng.2019.02.111
• [9] Yang X, Niu Z, Bai Q, et al (2019) Experimental study on the solidification process of fluid saturated in fin-foam composites for cold storage. Appl Therm Eng 161:114163 . doi: 10.1016/j.applthermaleng.2019.114163
• [10] Alizadeh M, Hosseinzadeh K, Shahavi MH, Ganji DD (2019) Solidi fi cation acceleration in a triplex-tube latent heat thermal energy storage system using V-shaped fi n and nano-enhanced phase change material. Appl Therm Eng 163:114436 . doi: 10.1016/j.applthermaleng.2019.114436
• [11] Valan Arasu A, Sasmito AP, Mujumdar AS (2011) Thermal performance enhancement of paraffin wax with AL 2O 3 and CuO nanoparticles - A numerical study. Front Heat Mass Transf 2:1–7 . doi: 10.5098/hmt.v2.4.3005
• [12] Iachachene F, Haddad Z, Oztop HF, Abu-Nada E (2019) Melting of phase change materials in a trapezoidal cavity: Orientation and nanoparticles effects. J Mol Liq #pagerange# . doi: 10.1016/j.molliq.2019.03.051
• [13] Khodadadi JM, Hosseinizadeh SF (2007) Nanoparticle-enhanced phase change materials (NEPCM) with great potential for improved thermal energy storage. Int Commun Heat Mass Transf 34:534–543 . doi: 10.1016/j.icheatmasstransfer.2007.02.005
• [14] (2013) ANSYS Fluent Theory Guide