Dizel Motorlarda Dimetil Eter Kullanımının Motor Performansına Etkileri Üzerine Bir Derleme Çalışması

Yıl 2022, Cilt: 10 Sayı: 1, 38 - 52, 31.12.2022

İsmet Sezer

Öz

Bu çalışma, dizel motorlarda dimetil eter (DME)’in saf veya yakıt katkısı olarak kullanımı üzerine yapılmış çeşitli çalışmaların sonuçlarından yararlanılarak derlenmiştir. Dizel motorlarda zararlı egzoz emisyonlarını azaltmanın birkaç yöntemi vardır. Bunlardan ilki motor tasarımında ve yakıt enjeksiyon sisteminde modifikasyonlar yaparak yanmanın iyileştirilmesidir, ancak bu pahalı ve zaman alıcı bir yöntemdir. İkinci yöntem ise katalitik konvektör ve partikül fitresi gibi donanımlar kullanmaktır, ancak bu donanımlar motor performansını olumsuz yönde etkiler. Hem egzoz emisyonlarını azaltmak hem de motor performansını artırmak için uygulanan son yöntem çeşitli alternatif yakıtların veya yakıt katkılarının kullanılmasıdır. Dizel motorlardaki en önemli emisyonlar azot oksitler (NOx) ve partikül maddelerdir (PM). Çoğu araştırmacı emisyonları azaltmanın en iyi yolunun doğalgaz, biyogaz, biyodizel gibi alternatif yakıtların veya konvansiyonel veya alternatif yakıtlarla birlikte çeşitli yakıt katkılarının kullanılması olduğunu bildirmektedir. Bu nedenle, alternatif yakıtlar ve yakıt katkıları üzerine yapılan çalışmaların sonuçlarının birlikte değerlendirilmesi pratik uygulamalar için oldukça önemlidir. Bu çalışma, dimetil eterin dizel motorlarda yakıt veya yakıt katkısı olarak kullanılmasının motor performansı üzerindeki etkilerinin incelenmesine odaklanmıştır.

Anahtar Kelimeler

Dizel motor performansı, Dimetil eter, Yakıt katkıları

Kaynakça

• Yoon S.H., Cha J.P. ve Lee C.S. (2010). An investigation of the effects of spray angle and injection strategy on dimethyl ether (DME) combustion and exhaust emission characteristics in a common-rail diesel engine. Fuel Processing Technology, 91, 1364-1372.
• Youn I.M., Park S.H., Roh H.G. ve Lee C.S. (2011). Investigation on the fuel spray and emission reduction characteristics for dimethyl ether (DME) fueled multi-cylinder diesel engine with common-rail injection system. Fuel Processing Technology, 92, 1280-1287.
• Alam M. ve Kajitani S. (2001). DME as an alternative fuel for direct injection diesel engine. 4th International Conference on Mechanical Engineering, Dhaka Kongresine Sunulmuş Bildiri.
• Maji S., Ahmed S., Siddiqui W.A. ve Kumar A. (2014). Impact of di-methyl ether (DME) as an additive fuel for compression ignition engine in reduction of urban air pollution. International Journal of Innovative Research in Science, Engineering and Technology, 3(11), 17221-17228.
• Park S.H. ve Lee C.S. (2014). Applicability of dimethyl ether (DME) in a compression ignition engine as an alternative fuel. Energy Conversion and Management, 86, 848-863.
• Wattanavichien K. (2009). Implementation of DME in a small direct injection diesel engine. International Journal of Renewable Energy, 4(2), 1-12.
• Duan J., Sun Y., Yang Z. ve Sun Z. (2012). Combustion and emissions characteristics of diesel engine operating on composite combustion mode of DME and diesel. Proceedings of International Conference on Mechanical Engineering and Material Science, Shanghai, China Kongresine Sunulmuş Bildiri.
• Kowalewicz A. ve Wojtyniak M. (2005). Alternative fuels and their application to combustion engines. Journal of Automobile Engineering, 219, 103-125.
• Azizi Z., Rezaeimanesh M., Tohidian T. ve Rahimpour M.R. (2014). Dimethyl ether: A review of technologies and production challenges. Chemical Engineering and Processing, 82, 150-172.
• Huang Z., Qiao X., Zhang W., Wu J. ve Zhang J. (2009). Dimethyl ether as alternative fuel for CI engine and vehicle. Frontiers of Energy and Power Engineering in China, 3(1), 99-108.
• Lecksiwilai N., Gheewala S.H., Sagisaka M. ve Yamaguchi K. (2016). Net energy ratio and life cycle greenhouse gases (GHG) assessment of bio-dimethyl ether (DME) produced from various agricultural residues in Thailand. Journal of Cleaner Production, 134, 523-531.
• Inayat A., Ghenai C., Naqvi M., Ammar M., Ayoub M. ve Hussin M.N.B. (2017). Parametric study for production of dimethyl ether (DME) as a fuel from palm wastes. Energy Procedia, 105, 1242-1249.
• Park S.H. ve Lee C.S. (2013). Combustion performance and emission reduction characteristics of automotive DME engine system. Progress in Energy and Combustion Science, 39, 147-168.
• Teng H., McCandless J. C. ve Scheneyer Jeffrey B. (2001). Thermochemical characteristics of dimethyl ether alternative fuel for compression-ignition. Society of Automotive Engineers, Paper no 2001-01-0154.
• Maji S., Ahmed S., Siddiqui W.A., Aggarwal S. ve Kumar A. (2015). Impact of di-methyl ether (DME) as an additive fuel for compression ignition engine in reduction of urban air pollution. American Journal of Environmental Protection, 3(2), 48-52.
• Guangxin G., Zhulin Y., Apeng Z., Shenghua L. ve Yanju W. (2013). Effects of fuel temperature on injection process and combustion of dimethyl ether engine. Journal of Energy Resources Technology, 135, 1-5.
• Jalanapurkar M., Patel K., Patel T., Rathod G. ve Granipa H. (2015). A literature review on combine effect of di-methyl ether (DME) as an additive & the injection pressure on the performance & emission of 4 stroke C.I engine. International Journal of Advance Engineering and Research Development, 2(1), 262-266.
• Kim H.J., Park S.H., Lee K. S. ve Lee C.S. (2011). A study of spray strategies on improvement of engine performance and emissions reduction characteristics in a DME fueled diesel engine. Energy, 36, 1802-1813.
• Xu S., Wang Y., Zhang X., Zhen X. ve Tao C. (2012). Development of a novel common-rail type dimethyl ether (DME) injector. Applied Energy 94, 1-12.
• Lim O.T. ve Iida N. (2015). A study on the spray and engine combustion characteristics of diesel-dimethyl ether fuel blends. J Automobile Engineering, 229(6), 782-792.
• Suh H.K. ve Lee C.S. (2008). Experimental and analytical study on the spray characteristics of dimethyl ether (DME) and diesel fuels within a common-rail injection system in a diesel engine. Fuel, 87, 925-932.
• Genbao L., Jianming C., Minglong L., Yuhua Q. ve Zhaoyang C. (2012). Experimental study on the size distribution characteristics of spray droplets of DME/diesel blended fuels. Fuel Processing Technology, 104, 352-355.
• Mohan B., Yang W., Yu W. ve Tay K.L. (2017). Numerical analysis of spray characteristics of dimethyl ether and diethyl ether fuel. Applied Energy, 185, 1403-1410.
• El-Hagar M.M.E-G. (2014). Effect of diethyl ether and dimethyl ether with liquefied petroleum gas on combustion and emissions characteristics of diesel engine. International Journal of Computer Science and Engineering, 2(3), 193-198.
• Wang Y., Xiao F., Zhao Y., Li D. ve Lei X. (2015). Study on cycle-by-cycle variations in a diesel engine with dimethyl ether as port premixing fuel. Applied Energy, 143, 58-70.
• Jeon J., Kwon S., Park Y.H., Oh Y. ve Park S. (2014). Visualizations of combustion and fuel/air mixture formation processes in a single cylinder engine fueled with DME. Applied Energy, 113, 294-301.
• Baskaran R. (2015). Analysis on synthesis, storage & combustion characteristics of DME as fuel in CI engines. International Journal for Research in Applied Science & Engineering Technology, 3(1), 133-140.
• Park S. (2012). Optimization of combustion chamber geometry and engine operating conditions for compression ignition engines fueled with dimethyl ether. Fuel, 97, 61-71.
• Benajes J., Novella R., Pastor J.M., Hernández-López A. ve Kokjohn S.L. (2018). Computational optimization of the combustion system of a heavy duty direct injection diesel engine operating with dimethyl-ether. Fuel, 218,127-139.
• Oda Y., Osafune Y., Ueda H. ve Fujimura K. (2004). Clean combustion technology in diesel engines operated with dimethyl ether. Mitsubishi Heavy Industries Ltd. Technical Review, 40(6), 1-5.
• Song J., Huang Z., Qiao X. ve Wang W. (2004). Performance of a controllable premixed combustion engine fueled with dimethyl ether. Energy Conversion and Management, 45, 2223-2232.
• Khunaphan S., Hartley U.W. ve Theinnoi K. (2013). Characterization and potential of dimethyl ether (DME) as dual fuel combustion in a compression ignition engine. International Journal of Engineering Science and Innovative Technology, 2(3), 79-85.
• Lamani V.T., Yadav A.K. ve Narayanappa K.G. (2017). Influence of low-temperature combustion and dimethyl ether-diesel blends on performance, combustion, and emission characteristics of common rail diesel engine: a CFD study. Environmental Science and Pollution Research, 24, 15500-15509.
• Chapman E.M. ve Boehman A.L. (2008). Pilot ignited premixed combustion of dimethyl ether in a turbodiesel engine. Fuel Processing Technology, 89, 1262-1271.
• Ying W., Longbao Z., Zhongji Y. ve Hongyi D. (2005). Study on combustion and emission characteristics of a vehicle engine fuelled dimethyl ether. Journal of Automotive Engineering, 219, 263-269.
• Benajes J., Novella R., Pastor J.M., Hernández-López A. ve Kokjohn S.L. (2018). Computational optimization of a combustion system for a stoichiometric DME fueled compression ignition engine. Fuel, 223, 20-31.
• Kropiwnicki J., Dominiczak P. ve Kneba Z. (2017). Analysis of the possibilities of using of DME fuel in motor boat drive systems. Combustion Engines, 171(4), 74-80.
• Smolec R., Idzior M., Karpiuk W. ve Kozak M. (2017). Assessment of the potential of dimethyl ether as an alternative fuel for compression ignition engines. Combustion Engines, 169(2), 181-186.
• Namasivayam A.M., Korakianitis T., Crookes R.J., Bob-Manuel K.D.H. ve Olsen J. (2010). Biodiesel, emulsified biodiesel and dimethyl ether as pilot fuels for natural gas fuelled engines. Applied Energy, 87, 769-778.
• Jang J. ve Bae C. (2009). Effects of valve events on the engine efficiency in a homogeneous charge compression ignition engine fueled by dimethyl ether. Fuel, 88, 1228-1234.
• Ryu K., Zacharakis-Jutz G.E. ve Kong S.-C. (2014). Performance characteristics of compression- ignition engine using high concentration of ammonia mixed with dimethyl ether. Applied Energy, 113, 488-499.
• Semelsberger T.A., Borup R.L., Grene H.L. (2006). Dimethyl ether (DME) as an alternative fuel. Journal of Power Sources, 156, 497-511.
• Li G. (2011). Dimethyl ether (DME): a new alternative fuel for diesel vehicle. Advanced Materials Research, 156-157, 1014-1018.
• Sezer I. (2011). Thermodynamic, performance and emission investigation of a diesel engine running on dimethyl ether and diethyl ether. International Journal of Thermal Sciences, 50, 1594-1603.
• Wang Y., Zhao Y. ve Yang Z. (2013). Dimethyl ether energy ratio effects in a dimethyl ether-diesel dual fuel premixed charge compression ignition engine. Applied Thermal Engineering, 54, 481-487.
• Ying W., Li H., Longbao Z. ve Wei L. (2010). Effects of DME pilot quantity on the performance of a DME PCCI-DI engine. Energy Conversion and Management, 51, 648-654.
• Chen Z., Konno M. ve Kajitani S. (2000). Performance and emissions of DI compression ignition engines fueled with dimethyl ether. JSME International Journal, 43(1), 82-88.
• Arcoumanis C., Bae C., Crookes R. ve Kinoshita E. (2008). The potential of di-methyl ether (DME) as an alternative fuel for compression-ignition engines: A review. Fuel, 87(7), 1014-1030.
• Taghavifar H., Khalilarya S., Mirhasani S. ve Jafarmadar S. (2014). Numerical energetic and exergetic analysis of CI diesel engine performance for different fuels of hydrogen, dimethyl ether, and diesel under various engine speeds. International Journal of Hydrogen Energy, 39, 9515-9526.
• Patil K.R. ve Thipse S.S. (2012). The potential of DME-diesel blends as an alternative fuel for CI engines. International Journal of Emerging Technology and Advanced Engineering 2(10), 35-41.
• Vispute K.M. ve Pawar T.J. (2016). Study and prospects of di-methyl ether as an alternative fuel in C.I. engine: review. International Journal of Trend in Research and Development, 3(4), 134-138.
• Theinnoi K., Suksompong P. ve Temwutthikun W. (2017). Engine performance of dual fuel operation with in-cylinder injected diesel fuels and in-port injected DME. Energy Procedia, 142, 461-467.
• Deepak K.M., Karthick M., Dineshbabu D., Srikanth P. ve Ramachandran M.G. (2015). Investigation on the effect of dimethyl ether in compression ignition engine. International Journal of Innovative Research in Science, Engineering and Technology, 4(2), 401-407.
• Kajitani S. (2004). A study of low compression ratio diesel engines operated with neat dimethyl ether (DME). JSME TED Newsletter, 42, 1-14.
• Hewu W. ve Longbao Z. (2017). Performance of a direct injection diesel engine fuelled with a dimethyl ether/diesel blend. Journal of Automobile Engineering, 819-824.
• Prabhakaran B., Thennarasu P. ve Karthick S. (2015). Performance and characteristics of a CI engine using DME (Dimethyl Ether). International Journal of Innovative Research in Science, Engineering and Technology, 4(2), 31-34.
• Kajitani S. ve Chen Z. (2003). Fundamental research on next generation fuel (dimethyl ether) engines. Journal of Scientific & Industrial Research, 62, 133-144.
• Abhishek, Rahul K., Santosh K. ve Martha O. (2017). Blending impacts of biogas and dimethyl ether (DME) on compressed ignition engine. International Research Journal of Engineering and Technology, 4(4), 2174-2177.
• Loganathan M., Anbarasu A. ve Velmurugan A. (2012). Emission characteristics of jatropha-ethanol and jatropha- dimethyl ether fuel blends on a DI diesel engine. Journal of Mechanical Engineering, 42(1), 38-46.
• Kim H.J. ve Park S.H. (2016). Optimization study on exhaust emissions and fuel consumption in a dimethyl ether (DME) fueled diesel engine. Fuel, 182, 541-549.
• Park S.H., Shin D. ve Park J. (2016). Effect of ethanol fraction on the combustion and emission characteristics of a dimethyl ether-ethanol dual-fuel reactivity controlled compression ignition engine. Applied Energy, 182, 243-252.
• Geng P., Cao E., Tan Q. ve Wie L. (2017). Effects of alternative fuels on the combustion characteristics and emission products from diesel engines: A review. Renewable and Sustainable Energy Reviews, 71, 523-534.
• Loganathan M., Anbarasu A. ve Velmurugan A. (2012). Emission characteristics of jatropha-dimethyl ether fuel blends on a DI diesel engine. International Journal of Scientific & Technology Research, 1(8), 28-32.
• Zhao Y., Wang Y., Li D., Lei X. ve Liu S. (2014). Combustion and emission characteristics of a DME (dimethyl ether)-diesel dual fuel premixed charge compression ignition engine with EGR (exhaust gas recirculation). Energy, 72, 608-617.
• Hou J., Wen Z., Jiang Z. ve Qiao X. (2014). Study on combustion and emissions of a turbocharged compression ignition engine fueled with dimethyl ether and biodiesel blends. Journal of the Energy Institute, 87, 102–113.
• Ying W., Longbao Z. ve Hewu W. (2006). Diesel emission improvements by the use of oxygenated DME/diesel blend fuels. Atmospheric Environment, 40, 2313-2320.
• Xinling L. ve Zhen H. (2009). Emission reduction potential of using gas-to-liquid and dimethyl ether fuels on a turbocharged diesel engine. Science of the Total Environment, 407, 2234-2244.
• Yanju W., Kun W., Wenrui W., Shenghua L., Xiao C., Yajing Y. ve Shanwen B. (2014). Comparison study on the emission characteristics of diesel- and dimethyl ether-originated particulate matters. Applied Energy, 130, 357-369.
• Wang Y., Zhao Y., Xiao F. ve Li D. (2014). Combustion and emission characteristics of a diesel engine with DME as port premixing fuel under different injection timing. Energy Conversion and Management, 77, 52-60.
• Park S.H., Kim H.J. ve Lee C.S. (2010). Effects of dimethyl-ether (DME) spray behavior in the cylinder on the combustion and exhaust emissions characteristics of a high speed diesel engine. Fuel Processing Technology, 91, 504-513.
• Thomas G., Feng B., Veeraragavan A., Cleary M.J. ve Drinnan N. (2014). Emissions from DME combustion in diesel engines and their implications on meeting future emission norms: A review. Fuel Processing Technology, 119, 286-304.
• Yoon S.H., Han S.C. ve Lee C.S. (2013). Effects of high EGR rate on dimethyl ether (DME) combustion and pollutant emission characteristics in a direct injection diesel engine. Energies, 6, 5157-5167.
• Roh H.G., Lee D. ve Lee C.S. (2015). Impact of DME-biodiesel, diesel-biodiesel and diesel fuels on the combustion and emission reduction characteristics of a CI engine according to pilot and single injection strategies. Journal of the Energy Institute, 88, 376-385.
• Zhu Z., Li D.K., Liu J., Wei Y.J. ve Liu S.H. (2012). Investigation on the regulated and unregulated emissions of a DME engine under different injection timing. Applied Thermal Engineering, 35, 9-14.
• Park S.H., Yoon S.H., Cha J. ve Lee C.S. (2014). Mixing effects of biogas and dimethyl ether (DME) on combustion and emission characteristics of DME fueled high-speed diesel engine. Energy, 66, 413-422.
• Bogdan J., Nicolae B., Călin I. ve Vlad B.N. (2017). Study of emissions for a compression ignition engine fueled with a mix of DME and diesel. Materials Science and Engineering, 252, 1-9.
• Kim H.J., Park S.W. ve Lee C.S. (2012). Numerical and experimental study on the combustion and emission characteristics of a dimethyl ether (DME) fueled compression ignition engine. Oil & Gas Science and Technology, 67(3), 479-489.
• Wang H.W., Zhou L.B., Jiang D.M. ve Huang Z.H. (2000). Study on the performance and emissions of a compression ignition engine fuelled with dimethyl ether. Journal of Automotive Engineering, 214, 101-106.