NATURAL FIBER REINFORCED POLYURETHANE RIGID FOAM

Yıl 2017, Cilt: 30 Sayı: 2, 97 - 109, 19.06.2017

M.ozgur Seydibeyoglu , Sibel Demiroğlu Fatma Erdoğan Ecem Akın Aynur Ayvalık Hüseyin Ata Karavana

Öz

The main objective of this study was to prepare polyurethane foam reinforced with local Turkish natural resources. In this work, olive kernel and nutshell fibers were used for reinforcing the polyurethane foam. In order to characterize reinforced polyurethane samples, mechanical, chemical, thermal, and morphological methods were used. Mechanical properties of polyurethane foam were measured by compression test. With compression test, it was observed that compressive strength of polyurethane foam was increased with 2.5 wt% olive kernel. Functional groups of polyurethane foams were determined by Fourier Transform Infrared Spectroscopy. Thermal behavior of polyurethane foam was analyzed with thermo gravimetric analyzer device. Among biocomposites, polyurethane foam filled with nutshell indicated higher thermal degradation than polyurethane foam filled with olive kernel. Scanning electron microscopy observations revealed that foam structure was formed with biofiber addition.

Anahtar Kelimeler

polyurethane, foam, natural fiber

Kaynakça

• Chattopadhyay, D.K., Raju K.V.S.N., “Structural engineering of polyurethane coatings for high performance applications”, Progress in Polymer Science, 32, 352– 418, (2007).
• Faruk, M., Sain M., Farnood, R., “Development of lignin and nanocellulose enhanced bio PU foams for automotive parts”, Journal of Polymers and the Environment, 22, 279–288, (2013).
• Szycher M., Szycher’s Handbook of Polyurethanes, CRC Press, Boca Raton, (2012).
• Randall, D., Lee, S., The (Huntsman) Polyurethanes Book, John Wiley & Sons, Inc., Oxford, (2003).
• Cateto, C.A., Barreiro, M.F., Rodrigues, A.E., Belgacem, M.N., “Optimization of lignin oxypropylation in view of polyurethane rigid foams preparation”, Ind. Eng. Chem. Res., 48 (5), 2583–2589, (2009).
• Patro, T.U., Harikrishnan, G., Misra, A., Khakhar, D.V., “Formation and characterization of polyurethane-vermiculite clay nanocomposite foams”, Polym. Eng. Sci., 48, 1778–1784, (2008).
• Xu, Z.B., Tang, X.L., Guand, A.J., Fang, Z.P., “Novel preparation and mechanical properties of rigid polyurethane foam/organoclay nanocomposites”, J. Appl. Polym. Sci., 106, 439–447, (2007).
• Saliba, C.C., Oréfice, R.L., Carneiro, J.R.G., Duarte, A.K., Schneider, W.T., Fernandes, M.R.F., “Effect of the incorporation of a novel natural inorganic short fiber on the properties of polyurethane composites”, Polym. Test., 24(7), 819-824, (2005).
• Bartczak, Z., Argon, A.S., Cohen, R.E., Weinberg, M., “Toughness mechanism in semi-crystalline polymer blends: II. High-density polyethylene toughened with calcium carbonate filler particles”, Polymer 40(9), 2347- 2365, (1999).
• Banik, I., Sain, M., “Water blown soy polyol-based polyurethane foams of different rigidities”, J. Reinf. Plast. Compos., 27, 357-373, (2008).
• Rusu, D., Boyer S. A. E., Lacrampe, M. F., Krawczak, P., Handbook of Bioplastics and Biocomposites Engineering Applications, Massachusetts, 427-428, (2011).
• Prociak, A., Kurañska, M., Malewska, E., Szczepkowski, L., Zieleniewska, M., Ryszkowska, J., Ficoñ, J., Rzasa, A., “Biobased polyurethane foams modified with natural fillers”, Polimery, 60(09), 592-599, (2015).
• Kurañska, M., Prociak, A., “Porous polyurethane composites with natural fibres”, Composites Science and Technology, 72, 299-304, (2012).
• Kurañska, M., Prociak, A., Mikelis, A., Ugis, C., “Porous polyurethane composites based on bio-components”, Composites Science and Technology, 75, 70–76, (2013).
• Gu, R., Sain, M.M., “Effects of wood fiber and microclay on the performance of soil based PU foam”, J. Polym. Environ., 21, 30–38, (2013).
• Gu, R., Sain, M.M., Konar, S.K., “A feasibility study of polyurethane composite foam with added hardwood pulp”, Industrial Crops and Products, 42, 273– 279, (2013).
• Seki, Y., Sarikanat, M., Sever, K., Durmuşkahya, C., “Extraction and properties of ferula communis (Chakshir) fibers as novel reinforcement for composites materials composites”, Part B: Engineering, 44 (1), 517–523, (2013).
• Treheux, D., Kechaou, B., Salvia, M., Beaugiraud, B., Juve, D., Fakhfakh, Z., “Mechanical and dielectric characterization of hemp fiber reinforced polypropylene (HFRPP) by dry impregnation process”, Express Polym. Lett., 4(3), 171–82, (2010).
• Mwaikambo, L.Y., Ansell, M.P., “Chemical modification of hemp, sisal, jute, and kapok fibers by alkalization”, J. Appl. Polym. Sci., 84(12), 2222–2234, (2002).
• Reddy N., Yang Y., “Structure and properties of high quality natural cellulose fibers from cornstalks”, Polymer, 46(15), 5494–500, (2005).
• Essabir, H., EI Achaby1, M., Hilali., E., Bouhfid1, R., Qaissl, A., “Morphological, structural, thermal and tensile properties of high density polyethylene composites reinforced with treated argan nut shell particles”, Journal of Bionic Engineering, 12 129–141, (2015).
• Ioannidou, O.A., Zabaniotou, A.A., Stavropoulos, G.G., Islam, M.A., Albanis, T.A., “Preparation of activated carbons from agricultural residues for pesticide adsorption”, Chemosphere, 80(11), 1328–1336, (2010).
• Peng, Y., Wu, S., “The structural and thermal characteristics of wheat straw hemicellulose”, Journal of Analytical and Applied Pyrolysis, 88, 134–139, (2010).
• Mishra, S., Mohanty, A.K., Drzal, L.T., Misra, M., Hinrichsen, G., “A review on pineapple leaf fibers, sisal fibers and their biocomposites”, Macro. Mater. Eng., 289, 955–74, (2004).
• Sá e Sant’Annaa, S., Arlindo de Souzaa, D., Marques de Araujoa, D., Cornélio de Freitas, C., Yoshidaa, M.I., “Physico-chemical analysis of flexible polyurethane foams containing commercial calcium carbonate”, Material Research, 11(4), 433 – 438, (2008).
• Fan, H., Tekeei, A., Suppes G.J., Hsieh, F., “Properties of biobased rigid polyurethane foams reinforced with fillers: Microspheres and Nanoclay”, International Journal of Polymer Science, 2012, 1-8, (2011).
• Mosiewicki, M.A., Dell'Arciprete, G.A., Aranguren M.I., Marcovich, N.E., “Polyurethane foams obtained from castor oil-based polyol and filled with wood flour”, Journal of Composite Materials, 43(25), 3057-3072, (2009).