Investigation of Mechanical Properties of Aluminum 7075 Alloy via Surface Engineering

Yıl 2023, Cilt: 10 Sayı: 2, 157 - 165, 27.06.2023

Gözde Altuntaş , Gamze Yazbahar , Bulent Bostan

https://doi.org/10.54287/gujsa.1259370

Öz

In this study, MAO process, which is one of the surface coating methods, was applied to 7075-T6 Al alloy in a thin thickness and the relationship between its mechanical properties compared to its uncoated state was investigated. Surface microstructure images of the prepared samples, coating thickness from the cross section and eds analysis were measured by scanning electron microscope (SEM). With the XRD analysis, the peaks in the material on which the coating is made were determined and the difference was examined according to the uncoated state. How the coating affects the dislocation density was investigated. The microhardness value of the samples, which were coated with 2 µm MAO from the surface, was measured according to HV 0.5. The hardness value was thus increased by 50%. The weight loss of coated and uncoated materials was calculated. Despite such a thin coating, the wear resistance has increased approximately 8 times compared to the uncoated state.

Anahtar Kelimeler

Micro Arc Oxidation (MAO), 7075 Al Alloy, Wear, Dislocation Density

Destekleyen Kurum

Gazi University

Proje Numarası

07/2019-15

Kaynakça

• Altuntaş, O. (2022). Enhancement of impact toughness properties of Al 7075 alloy via double aging heat treatment. Gazi University Journal of Science Part C: Design and Technology, 10(2), 194-202. doi:10.29109/gujsc.1108116
• Altuntaş, O., & Güral, A. (2015). Yüksek Karbonlu Sinterlenmiş Çeliklerin Darbe Tokluklarına Küreselleştirme Isıl İşlemlerinin Etkisinin İncelenmesi [Examining Effect of Speheroidization Heat Treatments on Impact Toughness of High Carbon Sintered Steel]. Politeknik Dergisi, 18(3), 107-112.
• Altuntaş, G., Altuntaş, O., & Bostan, B. (2021). Characterization of Al-7075/T651 Alloy by RRA Heat Treatment and Different Pre-deformation Effects. Transactions of the Indian Institute of Metals, 74(12), 3025-3033. doi:10.1007/s12666-021-02369-5
• Baxi, J., Kar, P., Liang, H., Polat, A., Usta, M., & Uçışık, A. H. (2008) Tribological characterization of microarc oxidized alumina coatings for biological applications. Vacuum, 83(1), 217-222. doi:10.1016/j.vacuum.2008.03.085
• Dean, J., Gu, T., & Clyne, T. W. (2015). Evaluation of residual stress levels in plasma electrolytic oxidation coatings using a curvature method. Surface and Coatings Technology, 269, 47-53. doi:10.1016/j.surfcoat.2014.11.006
• Hussein, R. O., Nie, X., & Northwood, D. O. (2013). An investigation of ceramic coating growth mechanisms in plasma electrolytic oxidation (PEO) processing. Electrochimica Acta, 112, 111-119. doi:10.1016/j.electacta.2013.08.137
• Li, Z.-y., Cai, Z.-b., Cui, Y., Liu, J.-h., & Zhu, M.-h. (2019). Effect of oxidation time on the impact wear of micro-arc oxidation coating on aluminum alloy. Wear, 426-427(A) 285-295. doi:10.1016/j.wear.2019.01.084
• Qi, X., Song, R., Wang, C., & Jiang, B. (2022). Influence of Interfacial Stress Produced by MAO on Electrochemical Corrosion and Stress Corrosion Cracking Behavior in 7075 Aluminum Alloy, Journal of The Electrochemical Society, 169(2), 020559. doi:10.1149/1945-7111/ac534b
• Schneider, C. A., Rasband, W. S., & Eliceiri, K. W. (2012). NIH Image to ImageJ: 25 years of image analysis. Nature Methods, 9(7) 671-675.doi:10.1038/nmeth.2089
• Shen, Z., Wu, Z., Wang, T., Jia, T., & Liu, C. (2023). Research on Technology of 7075 Aluminum Alloy Processed by Variable Polarity TIG Additive Manufacturing Utilizing Nanoparticle-Reinforced Welding Wire with TiB2. Crystals, 13(3), 399. doi:10.3390/cryst13030399
• Sobolev, A., Peretz, T., & Borodianskiy, K. (2020). Fabrication and characterization of ceramic coating on Al7075 Alloy by plasma electrolytic oxidation in molten salt. Coatings, 10(10), 993. doi:10.3390/coatings10100993
• Song, G.-L., & Shi, Z. (2014). Corrosion mechanism and evaluation of anodized magnesium alloys. Corrosion Science, 85, 126-140. doi:10.1016/j.corsci.2014.04.008
• Sundararajan, G., & Krishna, L. R. (2003). Mechanisms underlying the formation of thick alumina coatings through the MAO coating technology. Surface and Coatings Technology, 167(2-3), 269-277. doi:10.1016/S0257-8972(02)00918-0
• Xin, S.-G., Song, L.-X., Zhao, R.-G., & Hu, X.-F. (2006). Composition and thermal properties of the coating containing mullite and alümina. Materials Chemistry and Physics, 97(1), 132-136. doi:10.1016/j.matchemphys.2005.07.073
• Yilmaz, M. S., Özer, G., Şahin, O., & Karaaslan, A. (2021). Investigation of the Effects of Different Retrogression and Re-Aging Parameters Applied to the 7075 Alloy on the Micro-Arc Oxidation Process. Surface Review and Letters, 28(09), 2150078. doi:10.1142/S0218625X21500785
• Zhang, J., Dai, W., Wang, X., Wang, Y., Yue, H., Li, Q., Yang, X., Guo, C., & Li, C. (2023). Micro-arc oxidation of Al alloys: Mechanism, microstructure, surface properties, and fatigue damage behavior. Journal of Materials Research and Technology, 23, 4307-4333. doi:10.1016/j.jmrt.2023.02.028