Araştırma Makalesi
Yıl 2019,
Cilt: 4 Sayı: 2, 36 - 43, 05.08.2019
Öz
Kaynakça
- Alwodai, A. and Andrew D. Ball. “A Comparison of Different Techniques for Induction Motor Rotor Fault Diagnosis.” (2012).
- G. Betta, C. Liguori, A. Paolillo and A. Pietrosanto, "A DSP-based FFT-analyzer for the fault diagnosis of rotating machine based on vibration analysis," in IEEE Transactions on Instrumentation and Measurement, vol. 51, no. 6, pp. 1316-1322, Dec. 2002.
- D. G. Dorrell, W. T. Thomson and S. Roach, "Analysis of airgap flux, current, and vibration signals as a function of the combination of static and dynamic airgap eccentricity in 3-phase induction motors," in IEEE Transactions on Industry Applications, vol. 33, no. 1, pp. 24-34, Jan.-Feb. 1997.
- da Gama RS, Silva CCJ, Nascimento CEF, da Silva AM, da Costa C (2017) Analysis of Combined Motor Current Signature and Vibration-Monitoring Techniques in the Study of Broken Bars in Three-Phase High-Performance Induction Motors. J Electr Electron Syst 6: 235
- C. Morales-Perez, J. Rangel-Magdaleno, H. Peregrina-Barreto, J. P. Amezquita-Sanchez and M. Valtierra-Rodriguez, "Incipient Broken Rotor Bar Detection in Induction Motors Using Vibration Signals and the Orthogonal Matching Pursuit Algorithm," in IEEE Transactions on Instrumentation and Measurement, vol. 67, no. 9, pp. 2058-2068, Sept. 2018.
- Ž. Kanović, D. Matić, Z. Jeličić, M. Rapaić, B. Jakovljević and M. Kapetina, "Induction motor broken rotor bar detection using vibration analysis — A case study," 2013 9th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives (SDEMPED), Valencia, 2013, pp. 64-68.
- Jose Rangel-Magdaleno, Hayde Peregrina-Barreto, Juan Ramirez-Cortes, Roberto Morales-Caporal, and Israel Cruz-Vega, “Vibration Analysis of Partially Damaged Rotor Bar in Induction Motor under Different Load Condition Using DWT,” Shock and Vibration, vol. 2016, Article ID 3530464, 11 pages, 2016.
- D. Matic, Z. Kanovic, "Vibration Based Broken Bar Detection in Induction Machine for Low Load Conditions," Advances in Electrical and Computer Engineering, vol.17, no.1, pp.49-54, 2017,
- Kim DJ, Kim HJ, Hong JP, Park CJ (2014) Estimation of acoustic noise and vibration in an induction machine considering rotor eccentricity. IEEE Transactions on Magnetics 50: 857-860.
Yıl 2019,
Cilt: 4 Sayı: 2, 36 - 43, 05.08.2019
Öz
Özet
Bu çalışmada üç fazlı bir asenkron
motorda karakteristik arıza harmoniklerini içeren vibrasyon sinyalleri
kullanılarak kırık rotor çubuk arızası tespit edilmeye çalışılmıştır. Bilindiği
gibi kırık rotor çubuk arızası asenkron motorlarda momentte ve hızda
salınımlara sebep olmakta ve dolayısıyla motorun dinamik performansını olumsuz
yönde etkilemektedir. Moment ve hızdaki bu salınımlar motorda mekaniksel
titreşimlere de sebep olmaktadır. Bu çalışmada; arızalı ve sağlıklı asenkron
motorlardan vibrasyon sensörü ile alınan titreşim sinyalleri belirli bir
örnekleme frekansında örneklenerek frekans spektrumları elde edilmiş ve bu
spektrumlardaki karakteristik arıza sinyalleri belirlenmiştir. Belirlenen bu
arıza sinyalleri motor farklı yüklenme koşullarında iken test edilmiş ve
böylece bu sinyallerin arıza tespitinde etkin olduğu ispatlanmıştır.
Anahtar Kelimeler
Kaynakça
- Alwodai, A. and Andrew D. Ball. “A Comparison of Different Techniques for Induction Motor Rotor Fault Diagnosis.” (2012).
- G. Betta, C. Liguori, A. Paolillo and A. Pietrosanto, "A DSP-based FFT-analyzer for the fault diagnosis of rotating machine based on vibration analysis," in IEEE Transactions on Instrumentation and Measurement, vol. 51, no. 6, pp. 1316-1322, Dec. 2002.
- D. G. Dorrell, W. T. Thomson and S. Roach, "Analysis of airgap flux, current, and vibration signals as a function of the combination of static and dynamic airgap eccentricity in 3-phase induction motors," in IEEE Transactions on Industry Applications, vol. 33, no. 1, pp. 24-34, Jan.-Feb. 1997.
- da Gama RS, Silva CCJ, Nascimento CEF, da Silva AM, da Costa C (2017) Analysis of Combined Motor Current Signature and Vibration-Monitoring Techniques in the Study of Broken Bars in Three-Phase High-Performance Induction Motors. J Electr Electron Syst 6: 235
- C. Morales-Perez, J. Rangel-Magdaleno, H. Peregrina-Barreto, J. P. Amezquita-Sanchez and M. Valtierra-Rodriguez, "Incipient Broken Rotor Bar Detection in Induction Motors Using Vibration Signals and the Orthogonal Matching Pursuit Algorithm," in IEEE Transactions on Instrumentation and Measurement, vol. 67, no. 9, pp. 2058-2068, Sept. 2018.
- Ž. Kanović, D. Matić, Z. Jeličić, M. Rapaić, B. Jakovljević and M. Kapetina, "Induction motor broken rotor bar detection using vibration analysis — A case study," 2013 9th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives (SDEMPED), Valencia, 2013, pp. 64-68.
- Jose Rangel-Magdaleno, Hayde Peregrina-Barreto, Juan Ramirez-Cortes, Roberto Morales-Caporal, and Israel Cruz-Vega, “Vibration Analysis of Partially Damaged Rotor Bar in Induction Motor under Different Load Condition Using DWT,” Shock and Vibration, vol. 2016, Article ID 3530464, 11 pages, 2016.
- D. Matic, Z. Kanovic, "Vibration Based Broken Bar Detection in Induction Machine for Low Load Conditions," Advances in Electrical and Computer Engineering, vol.17, no.1, pp.49-54, 2017,
- Kim DJ, Kim HJ, Hong JP, Park CJ (2014) Estimation of acoustic noise and vibration in an induction machine considering rotor eccentricity. IEEE Transactions on Magnetics 50: 857-860.
Toplam 9 adet kaynakça vardır.
Ayrıntılar
| Birincil Dil | Türkçe |
|---|---|
| Konular | Mühendislik |
| Bölüm | Makaleler |
| Yazarlar | |
| Yayımlanma Tarihi | 5 Ağustos 2019 |
| Gönderilme Tarihi | 8 Mayıs 2019 |
| Kabul Tarihi | 4 Temmuz 2019 |
| Yayımlandığı Sayı | Yıl 2019 Cilt: 4 Sayı: 2 |
