2D LATTICE GENERATION BY COMPUTATIONAL DESIGN METHOD

Yıl 2023, Cilt: 7 Sayı: 2, 198 - 203, 31.08.2023

Nurullah Yüksel , Hüseyin Rıza Börklü

https://doi.org/10.46519/ij3dptdi.1239524

Öz

Designers often face the challenge of getting stuck with rigid and dogmatic ideas, leading to a limited number of design options being produced. While experience and talent can help overcome this, it can still take a significant amount of time and effort. This study proposes a repeatable, dynamic process that transforms all design components into parameters, creates a structural analysis model, and performs an optimization process that integrates design and structural analysis. Thus, by leveraging the power of technology, designers can generate a larger number of high-quality design options quickly and efficiently. The article evaluates the effectiveness of this proposed method in generating 2D lattice design concepts and highlights its ability to improve the quality of the design options generated and simplify the idea and concept generation process. The novelty of this method lies in its ability to create a flexible and dynamic approach to design, enabling designers to move beyond dogmatic ideas and generate a larger number of innovative design options. Another purpose of this article is to explore the potential of computer-aided computational design software in generating new and innovative design concepts.

Anahtar Kelimeler

Computational design, Generative design, Design Optimization, Lattice Structures

Kaynakça

• Monedero, J., "Parametric design: a review and some experiences." Automation in construction, Vol. 9, Issue 4, Pages 369-377, 2000.
• Gerber, D. and Lin, E., “Designing-in performance through parameterization, automation, and evolutionary algorithms”, Beyond Codes and Pixels: Proceedings of the 17th International Confer-ence on Computer-Aided Architectural Design Research in Asia, Pages 141-150, Hong Kong, 2012
• Wallach, J.C. and Gibson, L. J., "Mechanical behavior of a three-dimensional truss material", International Journal of Solids and Structures, Vol. 38, Pages 7181-7196, 2001.
• Mead, D.J. and Parthan, S., "Free wave propagation in two-dimensional periodic plates", Journal of Sound and Vibration, Vol. 64, Issue 3, Pages 325-348, 1979.
• Wadley, H.N., "Multifunctional periodic cellular metals", (in eng), Philosophical transactions. Series A, Mathematical, physical, and engineering sciences, Vol. 364, Issue 1838, Pages 31-68, 2006.
• Seepersad, C., "Applications of Additive Manufacturing in the Construction Industry a Prospective Review", 34th International Symposium on Automation and Robotics in Construction, Taiwan, 2017.
• Hao, L., Raymont, D., Yan, Hussein, C.A. and Young, P. “Design and additive manufacturing of cellular lattice structures”, The International Conference on Advanced Research in Virtual and Rapid Prototyping, Leiria 2011.
• Chang, T.-W., Moleta, T. J., & Park, D., “Computational design in the past, present and future of digital architecture,” Automation in Construction, Vol. 72, Pages 1-2, 2016.
• Fathi, A., Saleh, A., and Hegazy, M., “Computational Design as an Approach to Sustainable Regional Architecture in the Arab World,” Social and Behavioral Sciences, Vol. 225, Pages 180-190, 2016.
• Saha, A., and Ray, T., "Practical Robust Design Optimization Using Evolutionary Algorithms." ASME. Journal of Mechanical Design, Vol. 133, Issue 10, Pages 101012, 2011.
• Cagan, J., Grossmann, I.E., and Hooker, J., “A conceptual framework for combining artificial intelligence and optimization in engineering design,” Research in Engineering Design, Vol. 9, Pages 20–34, 1997.
• Doğru, M. B., "Topoloji optimizasyonu yardımıyla bir alternatörün tasarım eniyilemesi," Yüksek Lisans Tezi, Balıkesir Üniversitesi, Fen Bilimleri Enstitüsü, Balıkesir, 2019.
• Poyraz, M., "Bir kamyon şasisinin yapısal optimizasyonu" Yüksek Lisans Tezi, İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, İstanbul, 2004.
• Larsson, R. "Methodology for topology and shape optimization: Application to a rear lower control arm", Master’s thesis, Chalmers University of Technology, Department of Applied Mechanics, Göteborg, 2016.
• Yıldız, A. R., "Taşıt elemanlarının yapısal optimizasyon teknikleri ile optimum tasarımı," Politeknik Dergisi, Vol. 20, Issue 2, Pages 319-323, 2017.
• Raina, A., McComb, C. and Cagan, J. “Learning to Design from Humans: Imitating Human Designers Through Deep Learning", Journal of Mechanical Design, Vol. 141, Issue 11, 2019.
• Zhengtong, H., Zhengqi, G. Xiaokui, M. and Wanglin, C., "Multimaterial layout optimization of truss structures via an improved particle swarm optimization Algorithm”, Computers & Structures, Vol. 222, Pages 10-24, 2019.
• Jafari, M., Salajegheh, E. and Salajegheh, J., "Optimal design of truss structures using a hybrid method based on particle swarm optimizer and cultural algorithm," Structures, Vol. 32, Pages 391-405, 2021.
• Neeraja, D., Kamireddy, T., Potnuru, S.K. and Vijay Simha, R., "Weight optimization of plane truss using genetic algorithm," IOP Conference Series. Materials Science and Engineering, Vol. 263, Issue 3, 2017.
• Vu, V.T., “Weight minimization of trusses with natural frequency constraints”, 11th World Congress on Structural and Multidisciplinary Optimisation, Sydney, 2015.
• Millán-Páramo, C., "Modified simulated annealing algorithm for discrete sizing optimization of truss structure," Jordan Journal of Civil Engineering, Vol. 12, Issue 4, 2018.
• Thomas, W., “Architectural Design Optimization—Results from a User Survey,” KnE Social Sciences, Vol. 3, Issue 27, 2019.
• Herrema, A. J., Wiese, N. M., Darling, C. N., Ganapathysubramanian, B., Krishnamurthy, A., and Hsu, M.-C., “A framework for parametric design optimization using isogeometric analysis,” Computer Methods in Applied Mechanics and Engineering, Vol. 316, Pages 944-965, 2017.
• Estrada Meza, M.G., González Meza, E., Chi Pool, D.A. and McNamara Trujillo, J.S., “Design Exploration of Bamboo Shells Structures by Using Parametric Tools,” Applied Sciences, Vol. 12, Issue 17, Pages 7522, 2022.
• Ünsal, M. G., "Karesel atama problemi için deterministik tavlama benzetim yöntemlerinin karşılaştırılması," Uludağ Üniversitesi Mühendislik Fakültesi Dergisi, Vol. 18, Issue 2, Paper 37-46, 2013.
• Kolahan, F., Abolbashari, M. H. and Mohitzadeh, S., "Simulated annealing application for structural optimization," International Journal of Materials and Metallurgical Engineering, Vol. 1, Issue 11, Pages 120-123, 2007.
• Wong, K.C., Leung, K. and Wong, M.H., “Effect of Spatial Locality on an Evolutionary Algorithm for Multimodal Optimization”, Applications of Evolutionary Computation, Vol. 6024, Pages 481-490, 2010.
• Jong, K., “De Evolutionary Computation – A Unified Approach,” Pages 327–342, MIT Press, 2006.