Effect of mixing chamber or carburetor type on the performance of diesel engine operated on biodiesel and producer gas induction

Yıl 2016, , 25 - 37, 01.07.2016

Virupaxappa S Yaliwal

https://doi.org/10.18245/ijaet.02009

Cited By: 8

Öz

Biodiesel-producer gas fueled dual fuel engine suffers from lower brake thermal efficiency with higher unburned hydrocarbon (UBHC) and carbon monoxide (CO) emissions at all loads. In this present work, to harness energy from producer gas and ensure air and producer gas mixing quality, different mixing chambers (carburetors) have been developed. In the first phase of the work, mixing chambers were analyzed for its mixing performance using experimental approach. Different carburetors were drawn from Y– shape having 45, 60, 900 gas entries as well as with parallel flow gas entry. Based on the results obtained, it was found that parallel flow gas entry carburetor resulted in better mixing of air and producer gas. In the next phase of the work, experimental investigations were conducted to study the effect of air-producer gas mixture quality on the performance, combustion and emission characteristics of single cylinder, four strokes direct injection diesel engine developing 3.7 kW at 1500 rpm operated on dual fuel mode with Honge oil methyl ester (HOME) and producer gas induction. Experimental investigation showed that all carburetors except parallel flow gas entry carburetor resulted in lower performance. Dual fuel engine with parallel flow gas entry carburetor showed 5 to 8 % increased brake thermal efficiency with reduced smoke, HC and CO emission levels compared to other carburetors tested. Based on the study, it is concluded that this area still requires more research with long term engine operation.

Anahtar Kelimeler

Honge oil Methyl ester, Biomass gasification, Producer gas, Mixing chamber, Emissions, Sustainability, energy security.

Kaynakça

• Deepak A., Kumar A. A., 2007. “Performance and Emission Characteristics of a Jatropha Oil (Preheated and Blends) in a Direct Injection Compression Ignition Engine.” International Journal of Applied Thermal Engineering 27: 2314–2323.
• Nwafor O. M. I. 2000. “Effect of Advanced Injection Timing on the Performance of Rapeseed Oil in Diesel Engines.” Renewable Energy 21: 433–444.
• Nwafor, O. M. I. 2003. “The Effect of Elevated Fuel Inlet Temperature on Performance of Diesel Engine Running on Neat Vegetable Oil at Constant Speed Conditions.” Renewable Energy 28: 171–181.
• Scholl, K. W., Sorenson S. C., 1993. “Combustion Analysis of Soyabean Oil Methyl Ester in a Direct Injection Diesel Engine.” Society of Automotive Engineers. Paper No. 930-934.
• Khiari K., Awad S., Loubar K., Tarabet L., Mahmoud R., Tazerout M., Experimental investigation of pistacia lentiscus biodiesel as a fuel for direct injection diesel engine, Energy Conversion and Management, Volume 108, 15 January 2016, Pages 392-399
• Senthilkumar S., Sivakumar G., Siddarth Manoharan, Investigation of palm methyl-ester bio-diesel with additive on performance and emission characteristics of a diesel engine under 8-mode testing cycle, Alexandria Engineering Journal, Volume 54, Issue 3, September 2015, Pages 423-428
• Yaliwal V.S., Nataraja K.M., Banapurmath N.R., Tewari P.G., Honge oil methyl ester and producer gas-fuelled dual-fuel engine operated with varying compression ratios, International Journal of Sustainable Engineering, 2013. DOI: 10.1080/19397038.2013.837108.
• Roy Murari Mohon, Eiji Tomita, Nobuyuki Kawahara, Yuji Harada, Atsushi Sakane. 2009. “Effect of Fuel Injection Parameters on Engine Performance and Emissions of a Supercharged Producer Gas–Diesel Dual Fuel Engine.” Society of Automotive Engineers. Paper No. 2009-01-1848.
• Banapurmath N. R., Yaliwal V. S., Satish Kambalimath, Hunashyal A. M., Tewari P. G., 2011. “Effect of Biomass feed stock, carburetor, Compression Ratio and Biodiesel- Ethanol Blends on the Performance of Dual Fuel Engine.” Waste and Biomass Valorization 2 (4): 403–413. doi: 10.1007/s12649- 011-9083.
• Yaliwal V.S., Banapurmath N.R., Gireesh N.M., Tewari P.G., 2014. “Production and utilization of renewable and sustainable gaseous fuel for power generation applications: A review of literature”. Renewable and Sustainable Energy Reviews, Elsevier publications. Volume 34, Pages 608-627.
• Sridhar G., Sridhar H. V., Dasappa S., Paul P. J., Rajan N. K. S., Mukunda H. S., 2005. “Development of producer gas engines.” Proceedings of the Institution Mechanical Engineers, Part D: Journal of Automobile Engineering 219: 423–438.
• Ravindranath N. H., Balachandra P., 2009. “Sustainable Bioenergy for India: Technical, Economic and Policy Analysis.” Energy 34: 1003–1013.
• Nouni M. R., Mullick S. C., Kandpal T. C., 2007. “Biomass Gasifier Projects for Decentralized Power Supply in India: A Financial Evaluation.” Energy Policy 35: 1373–1385.
• Parikh P. P., Bhave A. G., Kapse D. V., Shashikantha S.. 1989. “Study of Thermal and Emission Performance of Small Gasifier–Dual-Fuel Engine Systems.” Biomass 19: 75–97.
• Ramadas A. S., Jayaraj S., Muralidharan C.. 2006. “Power Generation Using Coir Pith and Wood Derived Producer Gas in a Diesel Engine.” Fuel Processing Technology 87: 849–853.
• Singh R. N., S. P. Singh, and B. S. Pathak. 2007. “Investigations on Operation of CI Engine Using Producer Gas and Rice Bran Oil in Mixed Fuel Mode.” Renewable Energy 32: 1565–1580.
• Vinay Shrivastava, Abhishekh Kumar Jha, Arun Kumar Wamankar and S. Murugan, Performance and emission studies of a CI engine coupled with gasifier running in dual fuel mode, Chemical, Civil and Mechanical Engineering. Tracks of 3rd Nirma University. International Conference on Engineering (NUiCONE 2012), Procedia Engineering, Elsevier publication, Vol. 51, 2013, pp 600 – 608.
• Anil T.R., Ravi S.D., Shashikanth M., Rajan N.K.S., Tewari P.G., 2006. CFD Analysis of a Mixture Flow in a Producer Gas Carburetor, International Conference On Computational Fluid Dynamics, Acoustics, Heat Transfer and Electro-magnetic. CFEMATCON-06, July 24-25. Andhra University, Visakhapatnam – 530003, INDIA.
• Vinay S.S., Ravi S.D., PremaKumar G., Rajan N. K.S., 2008. Numerical and Experimental Modeling of Producer Gas Carburettor, Proc. of the International Conference on Advances in Mechanical Engineering, S.V. National Institute of Technology, Surat, Gujarat, India, pp 1 – 9.
• Roussos G. Papagiannakis and Dimitrios T. Hountalas,The Impact of Total Equivalence Ratio onEnvironmental Behavior of a Natural Gas Dual Fuel Diesel Engine, International journal of energy and environment, 5(6), 2011 733-744