Well to Wheel: A life-cycle based analysis of CI engine powered with diesel and various alcohol blends

Year 2021, Volume: 5 Issue: 4, 289 - 298, 31.12.2021

Ümit Ağbulut

https://doi.org/10.30939/ijastech..982996

Cited By: 5

Abstract

The core objective of the present research is to investigate the life cycle-based en-vironmental analysis of a CI engine powered with diesel (DF), diesel (90%) and etha-nol (10%) (E10), and diesel (90%) and methanol (10%) (M10) blends. The data is gathered when the engine runs at a constant engine speed of 1800 rpm, and varying engine loads from 2.5 Nm to 10 Nm with gaps of 2.5 Nm. In the results, higher CO2 emissions are recorded when the engine is fed by E10 and M10 test fuels due to the worsening engine performance and high-oxygen content of relevant alcohols. Cumu-latively, the CO2 emission is higher 17.37% for E10 and 24.76% for M10 test fuel in comparison to that of DF. Given that the life cycle analysis, it is noticed that DF has respectable advantages. In comparison to that of conventional DF, life cycle based total environmental pollution cost of E10 and M10 test fuels is calculated to be high-er by 4.13% and 8.61%, respectively. The highest specific life cycle-based environ-mental values are calculated to be 0.1371 $/kWh, 0.1444 $/kWh, and 0.1607 $/kWh for DF, E10, and M10 test fuels at 2.5 Nm. The highest life cycle based environmen-tal payback pollution values are achieved to be 22.62 years for DF, 23.83 years for E10, and 26.52 years for M10 test fuels at 2.5 Nm. In the conclusion, it is well-noticed that biofuels cannot compete with conventional DF in terms of economical and CO2-based life cycle environmental pollution issues in today’s technology.

Keywords

Life cycle analysis, CO2 emissions, ethanol, methanol, pollution cost

References

• [1] Sarıdemir, S., Gürel, A. E., Ağbulut, Ü., & Bakan, F. (2020). Investigating the role of fuel injection pressure change on per-formance characteristics of a DI-CI engine fuelled with methyl ester. Fuel, 271, 117634.
• [2] Chang, W. R., Hwang, J. J., & Wu, W. (2017). Environmental impact and sustainability study on biofuels for transportation applications. Renewable and Sustainable Energy Reviews, 67, 277-288.
• [3] Ardebili, S. M. S., Taghipoor, A., Solmaz, H., & Mostafaei, M. (2020). The effect of nano-biochar on the performance and emissions of a diesel engine fueled with fusel oil-diesel fuel. Fuel, 268, 117356.
• [4] Ardebili, S. M. S., Solmaz, H., İpci, D., Calam, A., & Mostafaei, M. (2020). A review on higher alcohol of fusel oil as a renewa-ble fuel for internal combustion engines: Applications, chal-lenges, and global potential. Fuel, 279, 118516.
• [5] Yılmaz, E. (2020). A Comparative Study on the Usage of RON68 and Naphtha in an HCCI Engine. International Journal of Automotive Science and Technology, 4(2), 90-97.
• [6] Örs İ., Sayın, B., & Ciniviz, M. (2020). A comparative study of ethanol and methanol addition effects on engine performance, combustion and emissions in the si engine. International Jour-nal of Automotive Science and Technology, 4(2), 59-69.
• [7] Karagöz, M. (2020). Investigation of performance and emission characteristics of an CI engine fuelled with diesel–waste tire oil–butanol blends. Fuel, 282, 118872.
• [8] Solmaz, H. (2020). A comparative study on the usage of fusel oil and reference fuels in an HCCI engine at different compres-sion ratios. Fuel, 273, 117775.
• [9] Ağbulut, Ü., Karagöz, M., Sarıdemir, S., & Öztürk, A. (2020). Impact of various metal-oxide based nanoparticles and bio-diesel blends on the combustion, performance, emission, vibra-tion and noise characteristics of a CI engine. Fuel, 270, 117521.
• [10] IEA (2020). Available at: https://www.iea.org/reports/transport-energy-and-CO2
• [11] Sarkar, M. S. K., Sadeka, S., & Sikdar, M. M. H. (2018). Energy consumption and CO2 emission in Bangladesh: trends and policy implications. Asia Pacific Journal of Energy and Environment, 5(1), 41-48.
• [12] Yıldız, G., Çalış, B., Gürel, A. E., & Ceylan, İ. (2020). Investigation of life cycle CO2 emissions of the polycrystalline and cadmium telluride PV panels. Environmental Nanotechnol-ogy, Monitoring & Management, 14, 100343.
• [13] Timmerberg, S., Kaltschmitt, M., & Finkbeiner, M. (2020). Hydrogen and hydrogen-derived fuels through methane decomposition of natural gas–GHG emissions and costs. Energy Conversion and Management: X, 7, 100043.
• [14] Aguilera, E., Reyes-Palomo, C., Díaz-Gaona, C., Sanz-Cobena, A., Smith, P., García-Laureano, R., & Rodríguez-Estévez, V. (2021). Greenhouse gas emissions from Mediterra-nean agriculture: Evidence of unbalanced research efforts and knowledge gaps. Global Environmental Change, 69, 102319.
• [15] Bakay, M. S., & Ağbulut, Ü. (2021). Electricity produc-tion based forecasting of greenhouse gas emissions in Turkey with deep learning, support vector machine and artificial neural network algorithms. Journal of Cleaner Production, 285, 125324.
• [16] Olivier, J. G., Schure, K. M., & Peters, J. A. H. W. (2017). Trends in global CO2 and total greenhouse gas emissi-ons. PBL Netherlands Environmental Assessment Agency, 5.
• [17] Liu, X., & Bae, J. (2018). Urbanization and industrializa-tion impact of CO2 emissions in China. Journal of cleaner pro-duction, 172, 178-186.
• [18] Moutinho, V., Madaleno, M., Inglesi-Lotz, R., & Dogan, E. (2018). Factors affecting CO2 emissions in top countries on renewable energies: a LMDI decomposition applica-tion. Renewable and Sustainable Energy Reviews, 90, 605-622.
• [19] Li, F., Xu, Z., & Ma, H. (2018). Can China achieve its CO2 emissions peak by 2030?. Ecological Indicators, 84, 337-344.
• [20] Solaymani, S. (2019). CO2 emissions patterns in 7 top carbon emitter economies: the case of transport sec-tor. Energy, 168, 989-1001.
• [21] Waheed, R., Chang, D., Sarwar, S., & Chen, W. (2018). Forest, agriculture, renewable energy, and CO2 emis-sion. Journal of Cleaner Production, 172, 4231-4238.
• [22] Zhou, X., Wei, X., Lin, J., Tian, X., Lev, B., & Wang, S. (2020). Supply chain management under carbon taxes: A re-view and bibliometric analysis. Omega, 102295.
• [23] Thisted, E. V., & Thisted, R. V. (2020). The diffusion of carbon taxes and emission trading schemes: the emerging norm of carbon pricing. Environmental Politics, 29(5), 804-824.
• [24] Waltho, C., Elhedhli, S., & Gzara, F. (2019). Green sup-ply chain network design: A review focused on policy adoption and emission quantification. International Journal of Produc-tion Economics, 208, 305-318.
• [25] Uyumaz, A., Aydoğan, B., Yılmaz, E., Solmaz, H., Aksoy, F., Mutlu, İ., ... & Calam, A. (2020). Experimental in-vestigation on the combustion, performance and exhaust emis-sion characteristics of poppy oil biodiesel-diesel dual fuel combustion in a CI engine. Fuel, 280, 118588.
• [26] Rajak, U., Nashine, P., & Verma, T. N. (2019). Assess-ment of diesel engine performance using spirulina microalgae biodiesel. Energy, 166, 1025-1036.
• [27] Krishania, N., Rajak, U., Verma, T. N., Birru, A. K., & Pugazhendhi, A. (2020). Effect of microalgae, tyre pyrolysis oil and Jatropha biodiesel enriched with diesel fuel on perfor-mance and emission characteristics of CI engine. Fuel, 278, 118252.
• [28] Rajak, U., Nashine, P., Verma, T. N., & Pugazhendhi, A. (2020). Performance and emission analysis of a diesel engine using hydrogen enriched n-butanol, diethyl ester and Spirulina microalgae biodiesel. Fuel, 271, 117645.
• [29] Yesilyurt, M. K., & Aydin, M. (2020). Experimental investigation on the performance, combustion and exhaust emission characteristics of a compression-ignition engine fueled with cottonseed oil biodiesel/diethyl ether/diesel fuel blends. Energy Conversion and Management, 205, 112355.
• [30] Rajak, U., Nashine, P., Verma, T. N., & Pugazhendhi, A. (2020). Performance and emission analysis of a diesel engine using hydrogen enriched n-butanol, diethyl ester and Spirulina microalgae biodiesel. Fuel, 271, 117645.
• [31] Afzal, A., Aabid, A., Khan, A., Khan, S. A., Rajak, U., Verma, T. N., & Kumar, R. (2020). Response surface analysis, clustering, and random forest regression of pressure in sudden-ly expanded high-speed aerodynamic flows. Aerospace Science and Technology, 107, 106318.
• [32] Karagöz, M., & Yanbuloğlu, B. Pirolitik Yakıt-Dizel-Alkol Karışımları ile Çalışan Bir Dizel Motorun HC ve NO Emisyonlarının Araştırılması. Düzce Üniversitesi Bilim ve Teknoloji Dergisi, 8(3), 2183-2192.
• [33] Solmaz, H., Ardebili, S. M. S., Aksoy, F., Calam, A., Yılmaz, E., & Arslan, M. (2020). Optimization of the operating conditions of a beta-type rhombic drive stirling engine by using response surface method. Energy, 198, 117377.
• [34] Rajak, U., Nashine, P., Verma, T. N., & Pugazhendhi, A. (2019). Alternating the environmental benefits of Aegle-diesel blends used in compression ignition. Fuel, 256, 115835.
• [35] Yesilyurt, M. K., & Cakmak, A. (2021). An extensive investigation of utilization of a C8 type long-chain alcohol as a sustainable next-generation biofuel and diesel fuel blends in a CI engine–The effects of alcohol infusion ratio on the perfor-mance, exhaust emissions, and combustion characteris-tics. Fuel, 305, 121453.
• [36] Berber, A. (2019). The effect of diesel-methanol blends with volumetric proportions on the performance and emissions of a diesel engine. Mechanics, 25(5), 363-369.
• [37] Çelikten, İ., Mutlu, E., & Solmaz, H. (2012). Variation of performance and emission characteristics of a diesel engine fueled with diesel, rapeseed oil and hazelnut oil methyl ester blends. Renewable Energy, 48, 122-126.
• [38] Yaman, H., Doğan, B., Yeşilyurt, M. K., & Erol, D. (2021). Application of Higher-Order Alcohols (1-Hexanol-C6 and 1-Heptanol-C7) in a Spark-Ignition Engine: Analysis and Assessment. Arabian Journal for Science and Engineering, 1-25.
• [39] Berber, A., & Tinkir, M. (2011). Prediction of a diesel engine characteristics by using different modelling tech-niques. International Journal of Physical Sciences, 6(16), 3979-3992.
• [40] Ağbulut, Ü., Sarıdemir, S., & Karagöz, M. (2020). Ex-perimental investigation of fusel oil (isoamyl alcohol) and die-sel blends in a CI engine. Fuel, 267, 117042.
• [41] Rajak, U., & Verma, T. N. (2019). A comparative analy-sis of engine characteristics from various biodiesels: Numerical study. Energy Conversion and Management, 180, 904-923.
• [42] Karagöz, M., Ağbulut, Ü., & Sarıdemir, S. (2020). Waste to energy: Production of waste tire pyrolysis oil and compre-hensive analysis of its usability in diesel engines. Fuel, 275, 117844.
• [43] Yesilyurt, M. K. (2020). An Experimental Study On The Performance And Exhaust Emission Characteristics Of A CI Engine Powered By Alcohol/Biodiesel/Diesel Fuel Blends Con-taining Different Types Of Alcohol Isopropanol-C3, 1-Butanol-C4, And Isopentanol-C5. Hittite Journal of Science and Engi-neering, 7(2), 135-148.
• [44] Mahla, S. K., Ardebili, S. M. S., Sharma, H., Dhir, A., Goga, G., & Solmaz, H. (2021). Determination and utilization of optimal diesel/n-butanol/biogas derivation for small utility dual fuel diesel engine. Fuel, 289, 119913.
• [45] Yesilyurt, M. K. (2020). The examination of a compres-sion-ignition engine powered by peanut oil biodiesel and diesel fuel in terms of energetic and exergetic performance parame-ters. Fuel, 278, 118319.
• [46] Kanbur BB, Xiang L, Dubey S, Choo FH, Duan F. Life cycle-based enviroeconomic and thermal analyses of the inlet air-cooled microturbine systems with liquefied natural gas cold energy. Journal of Cleaner Production 2018; 174: 1338-1350.
• [47] Yildiz I, Acikkalp E, Caliskan H, Mori K. Environmental pollution cost analyses of biodiesel and diesel fuels for a diesel engine. Journal of Environmental Management 2019; 243: 218-226.
• [48] Tunç, N., Karagöz, M., Çiftçi, B., & Deniz, E. (2021). Environmental pollution cost analysis of a diesel engine fueled with biogas-diesel-tire pyrolytic oil blends. Engineering Science and Technology, an International Journal, 24(3), 631-636.
• [49] Karagöz, M., & Uysal, C. (2020). Environmental Pollu-tion Cost Analyses of a Compression Ignition Diesel Engine Fuelled With Tire Pyrolytic Oil-Diesel Blends. International Journal of Automotive Science And Technology, 4(4), 281-288.
• [50] Sarıkoç, S. (2021). Lifecycle-based environmental pollu-tion cost analyses of a spark ignition engine fueled with a methanol-gasoline blend. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 1-18.
• [51] Setac (1993). Guidelines for Life Cycle Assessment - A Code of Practice, Society of Environmental Toxicology and Chemistry, Pensacola, FL.
• [52] Vera-Morales, M., & Schäfer, A. (2009). Fuel-cycle assessment of alternative aviation fuels. OMEGA Alternative Fuels Report (Draft), February, 49.
• [53] Edwards, R., et al. European Commission, Jrc Science for Policy Report Definition of input data to assess GHG de-fault emissions from biofuels in EU legislation 2017 [cited 2020 27 July]; Available from: https://ec.europa.eu/energy/sites/ener/files/documents/default_values_biofuels_main_reportl_online.pdf.
• [54] Laborde, D., & Valin, H. (2012). Modeling land-use changes in a global CGE: assessing the EU biofuel mandates with the MIRAGE-BioF model. Climate Change Econom-ics, 3(03), 1250017.
• [55] Bejan A, Tsatsaronis G, Moran M. Thermal Design and Optimization. John Wiley and Sons., 1995.
• [56] Emra, Republic of Turkey Energy Market Regulatory Authority, www.epdk.org.tr, 22 July 2019.
• [57] Tsatsaronis G, & Pisa J. Exergoeconomic evaluation and optimization of energy systems-application to the CGAM prob-lem. Energy 1994; 19: 287-321.
• [58] Sayin, C., Ilhan, M., Canakci, M., & Gumus, M. (2009). Effect of injection timing on the exhaust emissions of a diesel engine using diesel–methanol blends. Renewable energy, 34(5), 1261-1269.
• [59] Emiroğlu, A. O., & Şen, M. (2018). Combustion, per-formance and exhaust emission characterizations of a diesel engine operating with a ternary blend (alcohol-biodiesel-diesel fuel). Applied Thermal Engineering, 133, 371-380.
• [60] Emiroğlu, A. O., & Şen, M. (2018). Combustion, per-formance and emission characteristics of various alcohol blends in a single cylinder diesel engine. Fuel, 212, 34-40.
• [61] Keskin, A., Şen, M., & Emiroğlu, A. O. (2020). Experi-mental studies on biodiesel production from leather industry waste fat and its effect on diesel engine characteris-tics. Fuel, 276, 118000.
• [62] Emiroğlu, A. O., Keskin, A., & Şen, M. (2018). Experi-mental investigation of the effects of turkey rendering fat bio-diesel on combustion, performance and exhaust emissions of a diesel engine. Fuel, 216, 266-273.
• [63] Jamrozik, A. (2017). The effect of the alcohol content in the fuel mixture on the performance and emissions of a direct injection diesel engine fueled with diesel-methanol and diesel-ethanol blends. Energy Conversion and Management, 148, 461-476.
• [64] Marchuk, А., Likhanov, V. A., & Lopatin, O. P. (2019). Alternative energy: methanol, ethanol and alcohol esters of rapeseed oil as eco-friendly biofuel. Теоретическая и прикладная экология, (3), 80-86.
• [65] Jamrozik, A. (2017). The effect of the alcohol content in the fuel mixture on the performance and emissions of a direct injection diesel engine fueled with diesel-methanol and diesel-ethanol blends. Energy Conversion and Management, 148, 461-476.
• [66] Işık, M. Z. (2021). Comparative experimental investiga-tion on the effects of heavy alcohols-safflower biodiesel blends on combustion, performance and emissions in a power generator diesel engine. Applied Thermal Engineering, 184, 116142.
• [67] Somasundaram, D., Elango, A., & Karthikeyan, S. (2017). Combustion and emission analysis of fishing-boat die-sel engine running on diesel-ethanol-biodiesel-ceria-alumina nano blends.
• [68] Rajak, U., Nashine, P., Verma, T. N., & Pugazhendhi, A. (2020). Performance and emission analysis of a diesel engine using hydrogen enriched n-butanol, diethyl ester and Spirulina microalgae biodiesel. Fuel, 271, 117645.
• [69] Kumar, J. K., Raj, C. S., Sathishkumar, P., Gopal, P., & Antony, A. G. (2018). Investigation of performance and emis-sion characteristics of diesel blends with pine oil. Journal of Applied Fluid Mechanics, 11, 63-67.
• [70] Yesilyurt, M. K., Eryilmaz, T., & Arslan, M. (2018). A comparative analysis of the engine performance, exhaust emis-sions and combustion behaviors of a compression ignition en-gine fuelled with biodiesel/diesel/1-butanol (C4 alcohol) and biodiesel/diesel/n-pentanol (C5 alcohol) fuel blends. Energy, 165, 1332-1351.
• [71] Alam, M. S., Hyde, B., Duffy, P., & McNabola, A. (2018). Analysing the Co-Benefits of transport fleet and fuel policies in reducing PM2. 5 and CO2 emissions. Journal of cleaner production, 172, 623-634.
• [72] Chaichan, M. T. (2018). Performance and emission characteristics of CIE using hydrogen, biodiesel, and massive EGR. International Journal of Hydrogen Energy, 43(10), 5415-5435.