Investigation of Vehicle Engine Driving Comfort Used in Vibration Dampers

Year 2022, Volume: 6 Issue: 3, 302 - 308, 03.10.2022

Abdurrahman Karabulut , Hakan Şahman , Bahri Şamil Korkmaz

https://doi.org/10.30939/ijastech..1098514

Abstract

In this study, it is aimed to reduce the vibration transmitted to the chassis by using vibration dampers in the connection between the vehicle engine and chassis. A theoretical and experimental study was examined. The vibration damper is an elastic material. In the structure of this material, spring and damping are combined with the suspension system. In this study, insulation ratios between the two were compared using new and old dampers. As the engine speed changes in the vehicles, the vibration size it produces also changes. This causes severe discomfort to the driver and passengers in the vehicle. It was observed that the vibration magnitude passing from the engine to the chassis decreased by 50%. When the old and new dampers are compared, it is seen that the vibration isolation of old dampers is very weak. Therefore, it was concluded that the appropriate damper should be selected according to the mass and operating conditions of the engine. Also, it was observed that vibration amplitude increases at low engine speeds, and vibration amplitude decreases at high engine speeds. It has been found that the new vibration damper is a better insulating material than the worn damper.

Keywords

Vibration, Motor vibration, Vibration isolation, Vibration damping, Motor chassis connection.

References

• Korkmaz İ. Araçlarda Motor Askı Sistemlerinin İncelenmesi, Yüksek Lisans Tezi. İ.T.Ü. Fen Bilimleri Enstitüsü. İstanbul. 2007.
• Gültekin G, Mayda M, ve Milit M. Benzin ve Dizel Motorlarda Devir Sayısının Titreşime Olan Etkisinin İncelenmesi. BEÜ Fen Bilimleri Dergisi. 2017; 6: 39-43.
• Coşkun G. Kauçuk Gövdeli Motor Takozunun Sonlu Elemanlar Yöntemiyle Modelleme, Simülasyon ve Testleri. Yüksek Lisans Tezi. İ.T.Ü. Fen Bilimleri Enstitüsü. İstanbul. 2004.
• Şengün G. Kauçuk Motor Takozlarının Yorulma Ömürleri. Yüksek Lisans Tezi. Boğaziçi Üniversitesi Fen Bilimleri Enstitüsü. İstanbul. 2005.
• Rao S.S. Mechanical Vibrations. Pearson Education. Miami, USA. 2011.
• Ünlüsoy YS, Bilal H, ve Çalışkan K, Motor Destek Takozlarının Optimizasyonu. Bursa 5. Otomotiv Teknolojileri Kongresi. Bursa. 07-08 Haziran 2010: 253-266.
• Akkuş İ. Araç Motorlarının Şasiye Bağlantı Takozlarının Titreşim Sönümleme Etkisinin İncelenmesi. Yüksek Lisans Tezi. Afyon Kocatepe Üniversitesi Fen Bilimleri Enstitüsü. Afyonkarahisar. 2019.