Performance analysis of the plate heat exchangers for heating systems

Yıl 2022, , 50 - 54, 30.06.2022

Bayram Kılıç , Osman İpek

https://doi.org/10.31593/ijeat.1079354

Öz

In this work, thermodynamic analysis of the plate heat exchangers was carried out as experimentally. An experimental heating system with a plate heat exchanger (PHE) was designed and set up for this aim. Thermodynamic analysis of the experimental system at different temperatures and three different flow rates was carried out. The heat transfer rate and effectiveness values are calculated and obtained results were presented. As a result of the study, it was determined that the heat transfer rate increased for each of the three flow rates in PHE with increased inlet hot water temperature. According to the results of experiments, the highest heat transfer rate which is 2.5 kW, was obtained from a flow rate of 0.239 kg/s. The highest efficiency value was obtained as 44% for this fluid flow rate. It has been seen that the flow rate of 0.321 kg/s, which has the highest heat transfer and efficiency value mathematically, is not suitable for the PHE sizes used.

Anahtar Kelimeler

Effectiveness, Experimental, Plate heat exchangers, Thermodynamic analysis

Destekleyen Kurum

Süleyman Demirel University Research Foundation (SDUBAP)

Proje Numarası

2810-D-11

Teşekkür

This work was supported by the Suleyman Demirel University, Coordination Unit for Scientific Research Projects with 2810-D-11 project number. Authors gratefully acknowledge Süleyman Demirel University, Coordination Unit for Scientific Research Projects, Turkey, for the financial assistance.

Kaynakça

• Kılıç, B., Şencan, A. and Selbaş, R. 2009. Plakalı ısı eşanjörü kullanılan soğutma uygulamalarında soğutma etkinlik katsayısının deneysel incelenmesi. Tesisat Mühendisliği Dergisi, 113, 19-24.
• Gut, J.A.W. and Pinto, J.M. 2004. Optimal configuration design for plate heat exchangers. International Journal of Heat and Mass Transfer, 47, 4833-4848.
• Riverol, C. and Napolitano, V. 2005. Estimation of fouling in a plate heat exchanger through the application of neural networks. Journal of Chemical Technology and Biotechnology, 80, 594-600.
• Zhu, J. and Zhang, W. 2003. Optimization design of plate heat exchangers for geothermal district heating systems. Geothermics, 33, 337-347.
• Bansal, B., Müller-Steinhagen, H. and Chen, X.D. 2000. Performance of plate heat exchangers during calcium sulfate fouling investigation with an in-line filter. Chemical Engineering and Processing: Process Intensification, 39, 507-519.
• Dwivedi, A.K. and Das, S.K. 2006. The dynamics of plate heat exchangers are subject to flow variations. International Journal of Heat and Mass Transfer, 50, 2733-2743.
• Tae-Woo, L. Yong-Seok, C. and Chun-Ki, L. 2019. Design of plate heat exchangers for use in medium temperature organic Rankine cycles. Heat and Mass Transfer, 55, 165-174.
• Mohamed, A.E. Ammar, H.E. and Swellam, W.S. 2019. Improved prediction of oscillatory heat transfer coefficient for a thermoacoustic heat exchanger using a modified adaptive neuro-fuzzy inference system. International Journal of Refrigeration, 102, 47-54.
• Bhupal, K. Akhilesh, Soni. and Singh, S.N. 2018. Effect of geometrical parameters on the performance of chevron type plate heat exchanger. Experimental Thermal and Fluid Science, 91,126-133.
• Jorge, A.W.G. and Jose, M.P. 2003. Modeling of plate heat exchangers with generalized configurations. International Journal of Heat and Mass Transfer, 46, 2571-2585.
• Çengel, A.Y. and Boles, A.M. 1994. Thermodynamics: An Engineering Approach, McGraw-Hill, New York, A.B.D.
• Genceli, O. 1999. Isı Değiştiricileri. Birsen Yayınevi: İstanbul, Turkey, in Turkish.
• Selbaş, R., Sencan, A. and Kılıç, B. 2009. An alternative approach in thermal analysis of plate heat exchanger. Heat and Mass Transfer, 45, 323-329.