Energy and exergy analysis of an organic Rankine cycle under different heat source and turbine inlet temperature conditions

Yıl 2018, Cilt: 5 Sayı: 3, 140 - 146, 13.12.2018

Ali Kahraman , Remzi Şahin , Sadık Ata

https://doi.org/10.31593/ijeat.444461

Öz

In this study, the effect of turbine inlet temperature change on organic fluid performance in three different Organic Rankine Cycle (ORC) models designed using R113, R123 and isopentane fluid was determined. With the MATLAB and EES program, 17 different models have been formed for the heat source temperature that changes with the turbine inlet temperature. By analyzing the determined organic fluids on the generated models, the amount of heat entering the system, the work produced by the turbine, thermal efficiency, total exergy destruction and exergy efficiency were determined. While turbine inlet temperature is 80oC and heat source temperature is 110oC, isopentane fluid can reach maximum 8.8% while R113 fluid has reached 12.4% in same design conditions. With all cases examined, it is stated that isopentane fluid needs more heat input per unit mass compared to other fluids. While the maximum value of 531.7 kJ/kg heat input is required for isopentane fluid, R113 and R123 fluids require a maximum of 220.2 kJ/kg and 246.8 kJ/kg respectively. When the work values obtained from the turbine are examined, it is stated that R113 and R123 fluids show close properties. In this study, a maximum of 21.63 kJ/kg and 26.98 kJ / kg turbines were obtained for R113 and R123, while a 45.35 kJ/kg turbine work was obtained in the model using isopentane fluid. In exergy analysis, it was found that the best exergy efficiency performance was obtained in R113 fluid with 56.3%. In addition, the effect of overheating the organic fluid on the energy and exergy efficiency of the system was determined by the constant acceptance of the turbine inlet pressure.

Anahtar Kelimeler

Organic Rankine Cycle (ORC), Engineering Equation Solver (EES), Energy, Exergy, Dry Fluids

Kaynakça

• [1] Özden,H., Paul, D., 2011, “Organik Rankine Çevrim Teknolojisiyle Düşük Sıcaklıktaki Kaynaktan Faydalınarak Elektrik Üretimi Örnek Çalışma: Sarayköy Jeotermal Santrali”, X.Ulusal Tesisat Mühendisliği Kongresi, İzmir, Turkey.
• [2] Kardaş, O., 2017, "Design, Production and Testing of a Laboratory Scale Organic Rankine Cycle System”, Master Thesis, Boğaziçi University, Graduate School of Natural Sciences, İstanbul, Turkey.
• [3] Soysal, U., 2017, "Analysis and Optimization of a Small Scale Solar Organic Rankibe Cycle System for Power Generator ”, Master Thesis, Boğaziçi University, Graduate School of Natural Sciences, İstanbul, Turkey.
• [4] Günaydın, İ., 2016, "1,5 Kw Gücünde Organik Rankine Çevriminin Parametrik Tasarımı Termodinamik Analizi Prototip İmalatı ve Testi”, Master Thesis, Kırıkkale University, Graduate School of Natural Sciences, Kırıkkale, Turkey.
• [5] Su, W., Deng, S., 2017, "Simultaneous working fluids design and cycle optimization for Organic”, Applied Energy, 202, 618-627.
• [6] Sun, W., Yue, X., Wang, Y., 2017, “Exergy efficiency analysis of ORC (Organic Rankine Cycle) and ORC based combined cycles driven by low-temperature waste heat", Energy Conversion and Management, 135, 63-73.
• [7] Rahbar, K., Mahmoud, S., Al-Dadah, R., Moazami, N., 2015, “Parametric analysis and optimization of a small-scale radial turbine for Organic Rankine Cycle", Energy, 83, 696-711.
• [8] Li, Y.R., Du, M.T., Wu, C.M., Wu, S.Y., Liu, C., 2014, “Potential of organic Rankine cycle using zeotropic mixtures as working fluids for waste heat recovery”, Energy, 77, 509-519.
• [9] Le, V., Kheiri, A., Feidt, M., Pelloux-Prayer, S., 2014, “Thermodynamic and economic optimizations of a waste heat to power plant driven by a subcritical ORC (Organic Rankine Cycle) using pure or zeotropic working fluid”, Energy, 78, 622-638.
• [10] Muhammad, U., Imran, M., Lee, D., Park, B., 2015, “Design and experimental investigation of a 1 kW organic Rankine cycle system using R245fa as working fluid for low-grade waste heat recovery from steam”, Energy Conversion and Management, 103, 1089-1100.
• [11] Liu, Q., Shen, A., Duan, Y., 2015, “Parametric optimization and performance analyses of geothermal organic Rankine cycles using R600a/R601a mixtures as working fluids”, Applied Energy, 148, 410-420.
• [12] Özdemir, A., 2012, “Parabolik Kollektörlü Organik Rankine Çevriminin Isparta Şartlarında İncelenmesi”, Master Thesis, Süleyman Demirel University, Graduate School of Natural Sciences, Isparta, Turkey.
• [13] Calm J.M., Hourahan, G.C., 2007, “Refrigerant Data Update”, Heating/Piping/Air Conditioning Engineering, 79(1), 50-64.