Effects of Arc Voltage and Welding Current on the Arc Length of Tungsten Inert Gas Welding (TIG)

Yıl 2017, Cilt: 3 Sayı: 4, 213 - 221, 13.12.2017

İkpe Aniekan E. , Owunna Ikechukwu , Ememobong Ikpe

Öz

The effects of welding current and arc voltage on
arc length was investigated. Mild steel plates of 10mm thickness and 50mm x
100mm diameter were joined together through Tungsten Inert Gas (TIG) welding
process for four (4) different intervals and the welding arc lengths were
measured consecutively. The measured arc length for each welding interval
increased from 1.19mm, 1.93mm, 2.54mm and 3.12mm as the current increased from
50A, 100A, 150A to 190A while the voltage also maintained the same increasing
trend from 200V, 240V, 280V to 320V. The minimum arc length values measured for
each welding interval with the aforementioned current and voltage range also
maintained an increasing trend, and that led to the conclusion that the higher
the welding current and arc voltage, the longer and wider the arc length which
is an influential factor to other welding attributes.

Anahtar Kelimeler

Welding, Arc voltage, Arc length, Welding current, Electrode, Mild Steel

Kaynakça

• S. S. Pawale, Theoretical & experimental study of MIG/MAG welding technique. International Journal of Engineering Trends and Technology (IJETT), Vol. 24, Issue 3, pp. 142-144, 2015.
• A. O. Akii Ibhadode, Introduction to Manufacturing Technology, Second Edition, Benin City: Ambik Publishers, ISBN: 978-8016-34-0, 2001, pp. 553-555, 2001.
• K. Weman, Welding processes handbook, ISBN 0849317738, New York: CRC Press LLC, 2003.
• Miller Electric, Guidelines for Gas Tungsten Arc Welding (GTAW), Illinois Tool Works Company, Appleton, USA, Vol. 215 994 D, pp. 5, 2013.
• S. Mohd, P. Mohd and K. Pratibha, Effect of MIG Welding Input Process Parameters on Weld Bead Geometry on HSLA Steel. International Journal of Engineering Science and Technology, Vol. 5, Issue1, pp. 200-212, 2013.
• K. Memduh, Y. Ahmet, B. Mustafa and C. Zarif, Effects of Welding Current and Arc Voltage on FCAW Weld Bead Geometry. International Journal of Research in Engineering and Technology Vol. 4, Issue 9, pp. 23-28 2015.
• P. C. Satyaduttsinh, V. Jayesh and M. Tushar, A Review on Optimization of MIG Welding Parameters using Taguchi’s DOE Method. International Journal of Engineering and Management Research Vol. 4, Issue 1, pp. 16-21, 2014.
• BIS-British Standards Institution, British standard BS 499-1:2009: welding terms and symbols part 1: glossary for welding, brazing and thermal cutting, BSI London, 2009.
• S. Egerland, A Contribution to Arc Length Discussion, Soldagem & Inspecao, Fronius International GmbH, Wels, Austria, Vol. 20, Issue 3, 2015.
• S. P. Tewari, A. Gupta, and J. Prakash, Effect of Welding Parameters on the Weldability of Material, International Journal of Engineering Science and Technology Vol. 2, Issue 4, pp. 512-516, 2010.
• H. R. Ghazvinloo, A. Honarbakhsh-Raouf and N. Shadfar, Effect of arc voltage, welding current and welding speed on fatigue life, impact energy and bead penetration of AA 6061 joints produced by robotic MIG welding, Indian Journal of Science and Technology Vol. 3, Issue 2, pp. 156-162, 2010.
• F. Q. Fan, Z. D. Zhang and L. M. Liu, Oxide Contribution on Arc Plasma in Tungsten Inert Gas Welding of Magnesium Alloy. Journal of Science and Technology of Welding and Joining Vol. 18, Issue 5, pp. 434-440, 2013.
• Y. T. Lin, D. P. Wang, M. C. Wang, Y. Zhang and Y. Z. He, Effect of Different and Pre-and Post-Weld Heat Treatment on Microstructures and Mechanical Properties of Variable Polarity TIG Welded AA2219 Joints. Journal of Science and Technology of Welding and Joining Vol. 21, Issue 3, pp. 234-241, 2016.
• M. Jeyakumar, T. Christopher, R. Narayanan and B. N. Rao, Residual Stress Evaluation in Butt-Welded Steel Plates. Indian Journal of Engineering and Material Science Vol. 18, pp. 425-434, 2011.
• L. L. Wang, F. G. Lu, H. C. Cui and X. H. Tang, Investigation on Thermal Inertia of GMAW-P Welding on Al Alloy. Journal of Science and Technology of Welding and Joining Vol. 20, Issue 2, pp. 106-114, 2015.
• S. Krishnan, D. V. Kulkarni and A. De, Multipass Pulsed Current Gas Metal Arc Welding of P91 Steel. Journal of Science and Technology of Welding and Joining Vol. 21, Issue3, pp. 171-177, 2016.
• M. Weglowski, Y. Huang and Y. M. Zhang, Effect of welding current on metal transfer in GMAW Archives of Materials Science and Engineering Vol. 33, Issue 1, pp. 49-56, 2008.
• R. Chandra, S. Arul, and R. Sellamuthu, Effect of Electrode Diameter and Input Current on Gas Tungsten Arc Welding Heat Distribution Parameters. International Conference on Advances in Manufacturing and Materials Engineering, Procedia Materials Science Vol. 5, pp. 2369-2375, 2014.
• American Welding Society, Specification for Tungsten and Oxide Dispersed Tungsten Electrodes for Arc Welding and Cutting, AWS A5.12M/A5.12:2009 (ISO 6848:2004 MOD), 550 N.W. LeJeune Road, Miami, FL 33126, 2009.
• G. Jatinder, and S. Jagdev, (2012) Effect of Welding Speed and Heat Input Rate on stress concentration Factor of Butt Welded Joint of Is 2062 E250 A Steel. International Journal of Advanced Engineering Research and Studies Vol. 1, Issue 3, pp. 98-100, 2012.