Synthesis and Electrochemical Characterization of B4C-BN Nanocomposite Powders for New Generation Energy Storage Applications

Yıl 2024, Cilt: 1 Sayı: 1, 12 - 15, 26.07.2024

Suna Avcıoğlu , Figen Kaya , Cengiz Kaya

Öz

The development of supercapacitors with high energy density, stability, and a wide range of operating potential is an urgent issue. To satisfy the required enhancements on supercapacitor modules, new-generation electrode materials need to be designed. In this study, B4C-BN nanocomposite powder is proposed as a novel electrode material. Nanocomposite powders were synthesized via cost effective sol-gel technique and processing conditions were optimized to tailor phase ratio, particle size, and morphology. The phase composition of synthesized powders was characterized by XRD. The morphology of the particles was examined by SEM and HR-FESEM techniques. The electrochemical performance of electrodes was investigated by using CV. The results indicate that particle morphology, size, and the ratio of B4C/BN phases have a considerable impact electrochemical performance of fabricated electrodes.

Anahtar Kelimeler

Sol-Gel, B4C, BN, Energy Storage

Proje Numarası

122M836 and FBA-2023-5301

Kaynakça

• Avcıoğlu, S., Ateş, Z. N., Kam, E., Kaya, C., & Kaya, F. (2022). The influence of polyelectrolyte on the synthesis of B4C/BN nanocomposite powders via sol-gel method. Ceramics International, 48(11), 15355-15363. DOI: 10.1016/j.ceramint.2022.02.069.
• Avcıoğlu, S., Buldu-Akturk, M., Erdem, E., Kaya, F., & Kaya, C. (2023). Boron carbide as an electrode material: tailoring particle morphology to control capacitive behaviour. Materials, 16(2), 861. DOI: 10.3390/ma16020861.
• Avcioglu, S., Kaya, F., & Kaya, C. (2020). Effect of elemental nano boron on the transformation and morphology of boron carbide (B4C) powders synthesized from polymeric precursors. Ceramics International, 46(11), 17938-17950. DOI: 10.1016/j.ceramint.2020.04.104.
• Glaser, F. W., Moskowitz, D., & Post, B. (1953). An investigation of boron carbide. Journal of Applied Physics, 24(6), 731-733. DOI: 10.1063/1.1721367.
• Liang, C., Tian, F., Li, Z., Feng, Z., Wei, Z., & Li, C. (2003). Preparation and adsorption properties for thiophene of nanostructured W2C on ultrahigh-surface-area carbon materials. Chemistry of materials, 15(25), 4846-4853. DOI: 10.1021/cm034399c.
• Sanger, A., Kumar, A., Kumar, A., Jain, P. K., Mishra, Y. K., & Chandra, R. (2016). Silicon carbide nanocauliflowers for symmetric supercapacitor devices. Industrial & Engineering Chemistry Research, 55(35), 9452-9458. DOI: 10.1021/acs.iecr.6b02243.
• Thevenot, F. (1990). Boron carbide—a comprehensive review. Journal of the European Ceramic society, 6(4), 205-225. DOI: 10.1016/0955-2219(90)90048-K.