PROPOLİS YÜKLÜ BUKKAL YAMALARIN TASARIMI VE DEĞERLENDİRİLMESİ

Yıl 2024, Cilt: 48 Sayı: 3, 993 - 1003, 10.09.2024

Ali Alazzo , Amina Mudhafar Al-nima , Mohammed Nooraldeen Al-qattan

https://doi.org/10.33483/jfpau.1440531

Öz

Amaç: Etkili bir tedaviye ulaşmak için uygun bir uygulama aracı gerektiren bir durum olan aftöz stomatitte propolis kesinlikle önerilir. Bu endikasyon için uzun süreli mukozal temas ve koruma sağlayan bukkal yama faydalı olur. Buna göre bu çalışmada, tamamlayıcı özelliklere sahip üç polimerden (aljinat, karboksimetilselüloz ve polivinilpirolidon) oluşan propolis yüklü bukkal yamaları ve bunların optimum özelliklere sahip yamayı üretmek için uygun kombinasyonu tasarlanmıştır.
Gereç ve Yöntem: Döküm yöntemiyle farklı polimer oranlarına sahip dokuz yama hazırlanmış, şişme, yapışma süresi ve gücü ile çözünme hızı açısından değerlendirilmiştir. Sonra yamaların özellikleri yapay sinir ağı analizi kullanılarak ilişkilendirilmiştir.
Sonuç ve Tartışma: Sonuçlar, tüm yamaların pürüzsüz, yarı şeffaf ve esnek ile yüzey pH'ının 6,5 ile 7,4 arasında olduğunu göstermiştir. Polimer bileşimiyle ölçülen özellikler arasındaki korelasyon karmaşık ve doğrusal değildir. Bu nedenle bu özellikleri analiz ve optimize etmek için yapay sinir ağı kullanılmıştır. Bu analizin modeli, uygun çekme ve yapışma gücü için daha yüksek ağırlıklar sağlarken şişme, sertlik ve hızlı çözünme oranını olumsuz olarak değerlendirir. Toplama analizine göre, sırasıyla 15,5 ve 13'lük CMC% ve PVP% kombinasyonu, en iyi 3,5 puan sağlar.

Anahtar Kelimeler

Aljinat yamalar, bukkal yamalar, mukoadezif polimerleri, propolis

DESIGN AND EVALUATION OF PROPOLIS-LOADED BUCCAL PATCHES

Öz

Objective: Propolis is highly recommended in aphthous stomatitis, a condition that requires a proper delivery tool to achieve an efficient treatment. For this indication, a buccal patch that provides prolonged mucosal contact and protection would be beneficial. Accordingly, in this study, we designed propolis-loaded buccal patches, composed of three polymers (alginate, carboxymethylcellulose, and polyvinylpyrrolidone) of complementary properties, and the proper combination of them to produce the patch of optimum properties.
Material and Method: Nine patches of different polymer ratios were prepared by casting method and evaluated by assessing their swelling, adhesion time and strength, and dissolution rate. Then the patches properties were correlated using artificial neural network analysis.
Result and Discussion: The results showed that all patches were smooth, translucent, and flexible with surface pH between 6.5 and 7.4. The correlation between polymer composition and measured properties was complex and non-linear. Therefore, an artificial neural network was used to analyze these properties and optimize them. The model of this analysis provides higher weights for favorable tensile and adhesion strengths while considering swelling, rigidity, and fast dissolution rate as unfavorable. According to summation analysis, the combination of CMC% and PVP% of 15.5 and 13, respectively, provides the best score of 3.5.

Anahtar Kelimeler

Alginate patches, buccal patches, mucoadhesive polymers, propolis

Etik Beyan

none to declare

Destekleyen Kurum

none to declare

Teşekkür

The authors express their thanks to the college of pharmacy/ University of Mosul.

Kaynakça

• 1. De Castro, S.L. (2001). Propolis: Biological and pharmacological activities. Therapeutic uses of this bee-product. Annual Review of Biomedical Sciences, 3, 49-83. [CrossRef]
• 2. Al- Sandook, T., Al-Nema, M., Hamodat, H. (2010). A biocompatibility study of a new root canal sealer. Al-Rafidain Dental Journal, 10(1), 119-126. [CrossRef]
• 3. Alfaris, S.M., Dhahir, R.K., Al-Nima, A.M. (2022). Preparation, evaluation of propolis extract gel and exploring its antioxidant, antimicrobial activity. Pharmacognosy Journal, 14(6), 675-681. [CrossRef]
• 4. Al–Sultan, F. (2003). Aqueous extract of propolis in the treat-ment of recurrent aphthus stomatitis (Double blind study). Al-Rafidain Dental Journal, 3(2), 96-102. [CrossRef]
• 5. Shirvan, A.R., Bashari, A., Hemmatinejad, N. (2019). New insight into the fabrication of smart mucoadhesive buccal patches as a novel controlled-drug delivery system. In European Polymer Journal, 19, 541-550. [CrossRef]
• 6. Puri, V., Sharma, A., Maman, P., Rathore, N., Singh, I. (2019). Overview of mucoadhesive biopolymers for buccal drug delivery systems. In International Journal of Applied Pharmaceutics, 11(6), 18-29. [CrossRef]
• 7. El-Maghraby, G.M., Abdelzaher, M.M. (2015). Formulation and evaluation of simvastatin buccal film. Journal of Applied Pharmaceutical Science, 5(4), 70-77. [CrossRef]
• 8. Fonseca-Santos, B., Chorilli, M. (2018). An overview of polymeric dosage forms in buccal drug delivery: State of art, design of formulations and their in vivo performance evaluation. In Materials Science and Engineering C, 86, 129-143. [CrossRef]
• 9. Laffleur, F. (2014). Mucoadhesive polymers for buccal drug delivery. In Drug Development and Industrial Pharmacy, 40(5), 591-598. [CrossRef]
• 10. Eouani, C., Piccerelle, P., Prinderre, P., Bourret, E., Joachim, J. (2001). In-vitro comparative study of buccal mucoadhesive performance of different polymeric films. European Journal of Pharmaceutics and Biopharmaceutics, 52(1), 45-55. [CrossRef]
• 11. Habib, F., Azeem, M.A., Fetih, G., Safwat, M. (2010). Mucoadhesive buccal patches of lornoxicam: I- Development and in-vitro characterization. Bulletin of Pharmaceutical Sciences, 33(PART 1), 59-68. [CrossRef]
• 12. Kumar, V., Zakir, F., Agarwal, G., Choudhary, A. (2011). Formulation and evaluation of buccal patches of venlafaxine. International Journal of Pharmacy and Biological Sciences, 1(3), 170-182.
• 13. Okeke, O.C., Boateng, J.S. (2016). Composite HPMC and sodium alginate based buccal formulations for nicotine replacement therapy. International Journal of Biological Macromolecules, 91, 31-44. [CrossRef]
• 14. Ghareeb, M.M., Mohammad, H.A. (2013). Study the effects of secondary polymers on the properties of buccoadhesive polyvinyl alcohol patches of 5-Flourouracil. International Journal of Pharmacy and Pharmaceutical Sciences, 5(SUPPL.4), 484-488.
• 15. Al-Nema, L. (2011). The influence of saliva, artificial saliva and propolis extract on the wettability of heat-cured and visible light-cured denture base material. Al-Rafidain Dental Journal, 11(1), 96-104. [CrossRef]
• 16. Deshmane, S.V., Channawar, M.A., Chandewar, A.V., Joshi, U.M., Biyani, K.R. (2009). Chitosan based sustained release mucoadhesive buccal patches containing verapamil HCL. International Journal of Pharmacy and Pharmaceutical Sciences, 1(SUPPL. 1), 216-229.
• 17. Puratchikody, A., Prasanth, V.V., Mathew, S.T., Kumar, B.A. (2011). Development and characterization of mucoadhesive patches of salbutamol sulfate for unidirectional buccal drug delivery. Acta Pharmaceutica, 61(2), 157-170. [CrossRef]
• 18. Bernkop-Schnürch, A., Kast, C.E., Richter, M.F. (2001). Improvement in the mucoadhesive properties of alginate by the covalent attachment of cysteine. Journal of Controlled Release, 71(3), 277-285. [CrossRef]
• 19. Alazzo, A., Altaie, A., Al-Zidan, R., Alhamdany, H., Akram Yahya, N., Aldabbagh, N.T. (2024). Enhancing the Entrapment Efficiency of Alginate Floating Beads Using Double Emulsion Technique. Journal of Pharmaceutical Innovation, 19(3), 1-8. [CrossRef]
• 20. Pongjanyakul, T., Suksri, H. (2009). Alginate-magnesium aluminum silicate films for buccal delivery of nicotine. Colloids and Surfaces B: Biointerfaces, 74(1), 103-113. [CrossRef]
• 21. Pushp, P., Bhaskar, R., Kelkar, S., Sharma, N., Pathak, D., Gupta, M.K. (2021). Plasticized poly(vinylalcohol) and poly(vinylpyrrolidone) based patches with tunable mechanical properties for cardiac tissue engineering applications. Biotechnology and Bioengineering, 118(6), 2312-2325. [CrossRef]
• 22. Yong, C.S., Jung, J.H., Rhee, J.D., Kim, C.K., Choi, H.G. (2001). Physicochemical characterization and evaluation of buccal adhesive tablets containing omeprazole. Drug Development and Industrial Pharmacy, 27(5), 447-455. [CrossRef]
• 23. Patel, V.M., Prajapati, B.G., Patel, M.M. (2007). Effect of hydrophilic polymers on buccoadhesive Eudragit patches of propranolol hydrochloride using factorial design. AAPS PharmSciTech, 8(2). [CrossRef]
• 24. Ramineni, S.K., Cunningham, L.L., Dziubla, T.D., Puleo, D.A. (2013). Competing properties of mucoadhesive films designed for localized delivery of imiquimod. Biomaterials Science, 1(7), 753-762. [CrossRef]
• 25. Lamberti, G., Galdi, I., Barba, A.A. (2011). Controlled release from hydrogel-based solid matrices. A model accounting for water up-take, swelling and erosion. International Journal of Pharmaceutics, 407(1-2), 78-86. [CrossRef]
• 26. Colombo, P. (1993). Swelling-controlled release in hydrogel matrices for oral route. Advanced Drug Delivery Reviews, 11(1-2), 37-57. [CrossRef]
• 27. Takayama, K., Fujikawa, M., Obata, Y., Morishita, M. (2003). Neural network based optimization of drug formulations. Advanced Drug Delivery Reviews, 55(9), 1217-1231. [CrossRef]
• 28. Deb, P.K., Al-Attraqchi, O., Al-Qattan, M.N., Raghu Prasad, M., Tekade, R.K. (2018). Applications of computers in pharmaceutical product formulation. In Dosage Form Design Parameters, 2, 665-703. [CrossRef]
• 29. Wang, S., Di, J., Wang, D., Dai, X., Hua, Y., Gao, X., Zheng, A., Gao, J. (2022). State-of-the-art review of artificial neural networks to predict, characterize and optimize pharmaceutical formulation. Pharmaceutics, 14(1). [CrossRef]
• 30. Lefnaoui, S., Rebouh, S., Bouhedda, M., Yahoum, M.M. (2020). Artificial neural network for modeling formulation and drug permeation of topical patches containing diclofenac sodium. Drug Delivery and Translational Research, 10(1), 168-184. [CrossRef]
• 31. Nasibi, S., Nargesi khoramabadi, H., Arefian, M., Hojjati, M., Tajzad, I., Mokhtarzade, A., Mazhar, M., Jamavari, A. (2020). A review of Polyvinyl alcohol / Carboxiy methyl cellulose (PVA/CMC) composites for various applications. Journal of Composites and Compounds, 2(3), 68-75. [CrossRef]
• 32. Elessawy, N.A., Gouda, M.H., Elnouby, M.S., Zahran, H.F., Hashim, A., Abd El-Latif, M.M., Santos, D.M.F. (2021). Novel sodium alginate/polyvinylpyrrolidone/tio2 nanocomposite for efficient removal of cationic dye from aqueous solution. Applied Sciences (Switzerland), 11(19). [CrossRef]