Evaluation of shaping performance and surface changes of two different minimally invasive shaping file systems used in resin blocks

Yıl 2023, Cilt: 6 Sayı: 4, 826 - 832, 30.07.2023

Merve Yeniçeri Özata , Seda Falakaloğlu , Mehmet Eskibağlar

https://doi.org/10.32322/jhsm.1315227

Öz

Aims: This study aimed to compare the shaping ability of T-endo MIS and TruNatomy (TRN) file systems in J-shaped resin root canals and to investigate the deformation of the files after two acrylic block preparation and two sterilization cycles.
Methods: Forty acrylic blocks were numbered, then four file groups (n=10) were established: T-endo MIS glider (15.04) + T-endo MIS Finisher (25.04) (first and second usage) and TRN Glider (17.02) + TRN Prime (26.04) (first and second usage). Preoperative and postoperative images after the root canal preparation of simulated acrylic blocks were taken for each sample, and superimposed. The amount of resin removed from both the inner and outer walls of the canal to the level of 3, 5, and 7 mm from the apical point was measured, and the amount of transportation was calculated. Additionally, the deformation of the files was examined under a scanning electron microscope before and after usage and sterilization process.
Results: Tip deformation of TRN files increased with the number of uses (p=0.007). With the second use, the surface deformation of the MIS files increased (p=0.015). There was no difference in cutting-edge deformation in either file type according to the number of uses (p>0.05). There was no difference in transportation values between the MIS and TRN file systems at any level (p>0.05). The file systems did not show a significant difference in the amount of transportation between first and second use (p>0.05).
Conclusion: When TRN (26.04) and MIS (25.04) NiTi rotary files were used twice on acrylic blocks, the amount of deformation did not differ. Both file types were similar in terms of transportation values.

Anahtar Kelimeler

Acrylic block, canal transportation, file deformation, minimally invasive shaping

Kaynakça

• Haikel Y, Serfaty R, Bateman G, Senger B, Allemann C. Dynamic and cyclic fatigue of engine-driven rotary nickel-titanium endodontic instruments. J Endod. 1999;25:434-440.
• Yang Y, Hou B, Hou X. Effect of autoclave on surface microstructure and cyclic fatigue resistance of R-phase rotary instruments. J Peking Univ Health Sci. 2018;50:882-886.
• Ounsi HF, Franciosi G, Paragliola R, Goracci C, Grandini S. Effect of repeated use on the shaping ability of Protaper Universal rotary files. Int Dent SA. 2010;12:30-35.
• Armagan S, Haznedaroglu F. Scanning electron microscopy analysis of conventional and controlled‐memory nickel titanium files before and after multi‐uses in root canals. Micros Res Tech. 2021;84:1321-1327.
• Valois CR, Silva LP, Azevedo RB. Multiple autoclave cycles affect the surface of rotary nickel-titanium files: an atomic force microscopy study. J Endod. 2008;34:859-862.
• Paqué F, Ganahl D, Peters OA. Effects of root canal preparation on apical geometry assessed by micro–computed tomography. J Endod. 2009;35:1056-1059.
• Maske A, Weschenfelder VM, Soares Grecca Vilella F, Burnett Junior LH, de Melo TAF. Influence of access cavity design on fracture strength of endodontically treated lower molars. Aust Endod J. 2021;47:5-10.
• Mendes E, Soares A, Martins J, Silva E, Frozoni M. Influence of access cavity design and use of operating microscope and ultrasonic troughing to detect middle mesial canals in extracted mandibular first molars. Int Endod J. 2020;53:1430-1437.
• Morales MdlNP, Sánchez JAG, Olivieri JG, et al. Micro–computed tomographic assessment and comparative study of the shaping ability of 6 nickel-titanium files: an in vitro study. J Endod. 2021;47:812-819.
• de Oliveira DJF, Leoni GB, da Silva Goulart R, de Sousa-Neto MD, Sousa YTCS, Silva RG. Changes in geometry and transportation of root canals with severe curvature prepared by different heat-treated nickel-titanium instruments: a micro–computed tomographic study. J Endod. 2019;45:768-773.
• Usta SN, Solana C, Ruiz-Linares M, et al. Effectiveness of conservative instrumentation in root canal disinfection. Clin Oral Invest. 2023;27:3181-3188.
• Silva EJ, de Lima CO, Barbosa AFA, Lopes RT, Sassone LM, Versiani MA. The impact of TruNatomy and ProTaper Gold instruments on the preservation of the periradicular dentin and on the enlargement of the apical canal of mandibular molars. J Endod. 2022;48:650-658.
• T-endo MIS catalogue. Accessed on: June 1, 2023. Avaible at: https://oncudental.com/ Urunler/Endodonti/T-Endo-Mis.aspx.
• Dentsply Sirona TruNatomy Brochure. Accessed on June 1, 2023. Avaible at: https://www. dentsplysirona.com/en/explore/endodontics/trunatomy.html.
• Weine FS, Kelly RF, Lio PJ. The effect of preparation procedures on original canal shape and on apical foramen shape. J Endod. 1975;1:255-262.
• Merrett SJ, Bryant ST, Dummer PM. Comparison of the shaping ability of RaCe and FlexMaster rotary nickel-titanium systems in simulated canals. J Endod. 2006;32:960-962.
• Berutti E, Paolino DS, Chiandussi G, et al. Root canal anatomy preservation of WaveOne reciprocating files with or without glide path. J Endod. 2012;38:101-104.
• Elemam RF, Capelas JA, Vaz M, Viriato N, Pereira MdLFL, Azevedo Á. In vitro evaluation of root canal transportation after use of BT-Race files. Rev Port Estomatol Med Dent Cir Maxilofac. 2016;57:87-93.
• Ha J-H, Kim SK, Cohenca N, Kim H-C. Effect of R-phase heat treatment on torsional resistance and cyclic fatigue fracture. J Endod. 2013;39(3):389-393.
• Keskin C, Sivas Yilmaz Ö, Keleş A, Inan U. Comparison of cyclic fatigue resistance of Rotate instrument with reciprocating and continuous rotary nickel–titanium instruments at body temperature in relation to their transformation temperatures. Clin Oral Invest. 2021;25:151-157.
• Seago ST, Bergeron BE, Kirkpatrick TC, et al. Effect of repeated simulated clinical use and sterilization on the cutting efficiency and flexibility of Hyflex CM nickel-titanium rotary files. J Endod. 2015;41:725-728.
• Kamali S, Turkaydin D. Cyclic fatigue resistance and shaping ability of heat-treated nickel-titanium instruments after repeated use. Niger J Clin Pract. 2021;24:247-253.
• Kim H, Jeon S-J, Seo M-S. Comparison of the canal transportation of ProTaper Gold, WaveOne Gold, and TruNatomy in simulated double-curved canals. BMC Oral Health. 2021;21:1-7.
• Alarfaj B, Elsewify T, El-Sayed W, Eid B. Canal transportation and centering ability of thermally-treated niti files. J Int Dent Med Res. 2022;15:556-560.
• Manocha S, Saha S, Agarwal R, Vijaywargiya N, Saha M, Surana A. Comparative evaluation of canal transportation and canal centering ability in oval canals with newer nickel-titanium rotary single file systems-A cone-beam computed tomography study. J Conserv Dent. 2023;26:326-333.
• Kumar M, Paliwal A, Manish K, Ganapathy SK, Kumari N, Singh AR. Comparison of canal transportation in TruNatomy, ProTaper Gold, and Hyflex electric discharge machining file using cone-beam computed tomography. J Contemp Dent Pract. 2021;22:117-121.
• Wu M-K, Fan B, Wesselink PR. Leakage along apical root fillings in curved root canals. Part I: effects of apical transportation on seal of root fillings. J Endod. 2000;26:210-216.
• Gambarini G. Cyclic fatigue of nickel-titanium rotary instruments after clinical use with low-and high-torque endodontic motors. J Endod. 2001;27:772-4.
• Haikel Y, Serfaty R, Bateman G, Senger B, Allemann C. Dynamic and cyclic fatigue of engine-driven rotary nickel-titanium endodontic instruments. J Endod. 1999;25:434-440.
• Arantes WB, da Silva CM, Lage‐Marques JL, Habitante S, da Rosa LCL, de Medeiros JMF. SEM analysis of defects and wear on Ni–Ti rotary instruments. Scanning. 2014;36:411-418.
• Subha N, Sikri VK. Comparative evaluation of surface changes in four Ni-Ti instruments with successive uses-An SEM study. J Conserv Dent. 2011;14:282-286.
• Kim W, Oh S, Ryu G-J, et al. Effect of autoclave sterilization on cyclic fatigue and torsional fracture resistance of NiTi rotary instruments. Odontology. 2020;108:194-201.
• Casper RB, Roberts HW, Roberts MD, Himel VT, Bergeron BE. Comparison of autoclaving effects on torsional deformation and fracture resistance of three innovative endodontic file systems. J Endod. 2011;37:1572-1575.
• Uslu G, Özyürek T, Yılmaz K. Effect of sodium hypochlorite and EDTA on surface roughness of HyFlex CM and HyFlex EDM files. Micros Res Tech. 2018;81:1406-1411.
• Schäfer E, Diez C, Hoppe W, Tepel J. Roentgenographic investigation of frequency and degree of canal curvatures in human permanent teeth. J Endod. 2002;28:211-216.