The effect of positioning of seismic isolators in a reinforced concrete building

Yıl 2025, Cilt: 5 Sayı: 1, 1 - 18

Muhammet Yurdakul , Mehmet Burak Yıldız

Öz

Construction costs are increasing day by day. The importance of building the safest structures at the lowest cost is also increasing. For this purpose, it is necessary to design the structure in the best possible way without sacrificing safety. One way to ensure buildings are safe even during severe earthquakes is to include seismic isolation at the design stage. Judging by studies, seismic isolators are generally located at the lowest story of the building. However, the location of the seismic isolator on the lowest column has not been defined. In this study, the seismic isolator was located at the lower end and the top of the lowest story of the RC building to compare the effectiveness of its positioning. A high-damping rubber bearing (HDRB) was used as the seismic isolation device. Also, the effect of the absence of the diaphragm placed above the isolation level was investigated. As a result of the study, the necessary rebar of the RC building isolated at the top end of the column was less than 15% compared to the building isolated at the lower end of the columns for the beams. The base shear force of the building with seismic isolator located at the upper end of the column was 2.7% greater than that the building with the seismic isolator located at the lower end of the column.

Anahtar Kelimeler

HDRB design, UBC97, Isolator device positioning, Reinforced concrete building, Finite elements model

The effect of positioning of seismic isolators in a reinforced concrete building

Öz

Construction costs are increasing day by day. The importance of building the safest structures at the lowest cost is also increasing. For this purpose, it is necessary to design the structure in the best possible way without sacrificing safety. One way to ensure buildings are safe even during severe earthquakes is to include seismic isolation at the design stage. Judging by studies, seismic isolators are generally located at the lowest story of the building. However, there is no sufficient study to determine the location of the seismic isolator in the lowest column. In this study, the seismic isolator was located at the lower end and the top of the lowest story of the RC building to compare the effectiveness of its positioning. A high-damping rubber bearing (HDRB) was used as the seismic isolation device. Also, the effect of the absence of the diaphragm placed above the isolation level was investigated. As a result of the study, the necessary rebar of the RC building isolated at the top end of the column was less than 15% compared to the building isolated at the lower end of the columns for the beams. The base shear force of the building with seismic isolator located at the upper end of the column was 2.7% greater than that the building with the seismic isolator located at the lower end of the column.

Anahtar Kelimeler

HDRB design, UBC97, Isolator device positioning, Reinforced cocncrete building, Finite elements model

Kaynakça

• Ryan KL and Earl CL (2010) Analysis and Design of Inter-Story Isolation Systems with Nonlinear Devices. Journal of Earthquake Engineering 14(7):1044–1062. https://doi.org/10.1080/13632461003668020
• Huang XY, Zhou FL, Wang L, Heisha LHW and Luo XH (2011) Experimental Investigation on Mid-Story Isolated Structures. Advanced Materials Research 163–167: 4014–4021. https://doi.org/10.4028/www.scientific.net/AMR.163-167.4014
• Shahzad MM, Zhang XA, Wang X, Abdulhadi M, Wang T and Xiao Y (2022) Response control analysis of a new mega‐subcontrolled structural system (MSCSS) under seismic excitation. The Structural Design of Tall and Special Buildings, 31(10), e1935. https://doi.org/10.1002/tal.1935
• Shu T, Li H, Wang T, Liu D, Yao S and Lei M (2023) Study on the seismic response of new staggered story isolated structure under different parameters. Frontiers in Earth Science, 11, 1115235. https://doi.org/10.3389/feart.2023.1115235
• Di Egidio A, Pagliaro S, and Contento A (2023) Seismic Performance of Frame Structure with Hysteretic Intermediate Discontinuity. Applied Sciences, 13(9), 5373. https://doi.org/10.3390/app13095373.
• Skandalos K, Afshari H, Hare W, and Tesfamariam S (2020) Multi-objective optimization of inter-story isolated buildings using metaheuristic and derivative-free algorithms. Soil Dynamics and Earthquake Engineering, 132, 106058. https://doi.org/10.1016/j.soildyn.2020.106058.
• Charmpis DC, Komodromos P and Phocas MC (2012) Optimized earthquake response of multi‐storey buildings with seismic isolation at various elevations. Earthquake Engineering & Structural Dynamics 41(15): 2289–2310. https://doi.org/10.1002/eqe.2187
• Zhou FL, Zhang Y and Tan P (2009) Theoretical study on story isolation system. China Civil Engineering Journal 42(8): 1–8. https://doi.org/10.1016/j.engstruct.2020.111296
• Wang SJ, Chang KC, Hwang JS and Lee BH (2011) Simplified analysis of mid‐story seismically isolated buildings. Earthquake engineering & structural dynamics 40(2): 119-133. https://doi.org/10.1002/eqe.1004
• Wang SJ, Chang KC, Hwang JS, Hsiao JY, Lee BH and Hung YC (2012) Dynamic behavior of a building structure tested with base and mid-story isolation systems. Engineering Structures 42: 420–433. https://doi.org/10.1016/j.engstruct.2012.04.035
• Kim HS and Kang JW (2019) Optimal design of smart mid-story isolated control system for a high-rise building. International Journal of Steel Structures. https://doi.org/10.1007/s13296-019-00258-8
• Faiella D and Mele E (2020) Insights into inter-story isolation design through the analysis of two case studies. Engineering Structures 215. https://doi.org/10.1016/j.engstruct.2020.110660
• Becker Tracy C and Ezazi Ashkan (2015) Enhanced performance through a dual isolation seismic protection system. The Structural Design of Tall and Special Buildings 25(1): 72-89. https://doi.org/10.1002/tal.1229
• Xiao S, Li C, Liu D, Sun W and Lei M (2023) Research on Irregular Plane Mid story Isolation Structures in Castor Earthquake prone Areas Considering SSI Effect. Frontiers in Earth Science 11. https://doi.org/10.3389/feart.2023.1207110
• Zhou Q, Singh MK and Huang X (2016) Model reduction and optimal parameters of mid-story isolation systems. Engineering Structures 124: 36-48. https://doi.org/10.1016/j.engstruct.2016.06.011
• Kim HS and Kim U (2023) Development of a Control Algorithm for a Semi-Active Mid-Story Isolation System Using Reinforcement Learning. Applied Sciences 13(4) 2053. https://doi.org/10.3390/app13042053
• Zhang R, Phillips BM, Taniguchi S, Ikenaga M and Ikago K (2017) Shake table real‐time hybrid simulation techniques for the performance evaluation of buildings with inter‐story isolation. Structural Control and Health Monitoring 24(10). https://doi.org/10.1002/stc.1971
• Wu Y, Lu J and Qi A (2019) Shaking table test and numerical analysis of mid-story isolation eccentric structure with tower–podium. Advances in Mechanical Engineering 11(1). https://doi.org/10.1177/1687814018819562
• Uniform Building Code 1997 American Structural Engineering Design Provisions.
• Saifullah MK and Alhan C (2017) Necessity and adequacy of near-source factors for seismically isolated buildings. Earthquakes and Structures 12(1): 91-108. https://doi.org/10.12989/eas.2017.12.1.091
• General Directorate for Foundations 2018 Turkey Building Earthquake Code (TBEC2018).
• Soyluk A and Tuna ME (2011) Effect of seismic base isolation usage on the architectural design of irregular buildings. Journal of the Faculty of Engineering and Architecture of Gazi University 26(3):635-642
• Farmanbordar B, Adnan AB, Tahir MM and Faridmehr I (2017) Seismic assessment of base-isolated nuclear power plants. Advances in computational design 2(3): 211-223. https://doi.org/10.12989/acd.2017.2.3.211
• Design loads for buildings 1997 Turkish Standard Code 498
• Taha AE, Elias S, Matsagar V and Jain KJ (2019) Seismic response control of asymmetric buildings using tuned mass dampers. Structural Design of Tall and Special Building. 28(18). https://doi.org/10.1002/tal.1673
• Orak MS and Celep Z (2017) Seismic Performance of Gedikbulak School Building Revisited. Teknik Dergi. 28(2): 7889–7889. https://doi.org/10.18400/tekderg.304103
• Kilar V and Koren D (2009) Seismic behaviour of asymmetric base isolated structures with various distributions of isolators. Engineering Structures 31(4): 910–921. https://doi.org/10.1016/j.engstruct.2008.12.006
• Tsiavos A, Schlatter D, Markic T and Stojadinovic B (2017) Experimental and analytical investigation of the inelastic behavior of structures isolated using friction pendulum bearings. Procedia Engineering 199: 465–470. https://doi.org/10.1016/j.proeng.2017.09.047