This study covers the control of the pendulum angle by taking into account the dynamic equations and motor dynamics of the rotary inverted pendulum system, with the help of state variables in the Matlab program, by using the sliding mode control method with sliding surface moving and the adaptive neural fuzzy inference system together. The sliding mode control method with a changing sliding surface is a part of the control structure. The slope of the sliding surface was calculated using the adaptive neural fuzzy inference technique. The optimum values of the coefficients in the adaptive neural-fuzzy inference system structure have been calculated by genetic algorithm. The finding of the coefficients, the sum of the squares of the errors chosen as the objective function. The input of the adaptive neural fuzzy inference system structure consists of the error of the pendulum and the derivative of the error of the pendulum. The gradient of the sliding surface of the sliding mode control structure is the output of the adaptive neural fuzzy inference system structure. According to the findings, the pendulum angle achieved the appropriate reference value after 1.5 seconds, with an error of around zero. It obtained that the engine torque value reaches up to 50 Nm. From here, it is seen that the motor torque values used in practical applications and the motor torque values as a result of this study overlap.
Rotary inverted pendulum sliding mode control anfis moving sliding surface
Birincil Dil | İngilizce |
---|---|
Konular | Makine Mühendisliği |
Bölüm | Makina Mühendisliği / Mechanical Engineering |
Yazarlar | |
Erken Görünüm Tarihi | 27 Mayıs 2023 |
Yayımlanma Tarihi | 1 Haziran 2023 |
Gönderilme Tarihi | 30 Ağustos 2022 |
Kabul Tarihi | 16 Ocak 2023 |
Yayımlandığı Sayı | Yıl 2023 Cilt: 13 Sayı: 2 |