The Production of Vegetable Oil-Based Polyols and Modelling of Rheological Properties

Year 2017, Özel Sayı 1, 33 - 42, 20.10.2017

Ercan Aydoğmuş , Müge Gür

Abstract

In this study, some vegetable-oil based polyols were produced from the different vegetables oils with the catalysts. The produced polyols compared with commercial polyols in terms of rheological properties such as viscosity, temperature, shear stress, shear rate. The rheological properties of the polyols were modelling with general equations based on experimental data. Canola, cotton, linseed, corn, hazelnut and soybean oils were used in the production of polyols. The polyol production was accomplished by oxygen bonding to the structure followed by hydroxyl bonding by breaking the double bonds in the oil. These steps were, respectively, the steps of epoxidation, hydroxylation and purification. In this study, variations of viscosities of soybean oil, cottonseed oil, corn oil, hazelnut oil, canola oil, linseed oil-based polyols and commercial polyols were determined a function of temperature. It is known that the viscosity of the fluid decreases as temperature increases. The tested polyols showed Newtonian and non- Newtonian fluids behavior at certain temperature range. According to the experimental data; the linear and non-linear regression were made to determine coefficients of regression in the model equations.

Keywords

Vegetable oil, polyols, rheological properties, modelling

References

• 1. Andersson A, Lundmark S, Magnusson A, Maurer FHJ. Vibration and Acoustic Damping of Flexible
• 2. Polyurethane Foams Modified with a Hyper Branched Polymer. Journal of Cellular Plastics. 2009; vol.01, pp. 01-21.
• 3. Armenta JLR, Heinze T, Martinez AMM. New Polyurethane Foams Modified with Cellulose Derivatives. European Polymer Journal. 2004; vol. 40, pp. 2803-2812.
• 4. Bashirzadeh R, Gharehbaghi A. An investigation on reactivity, mechanical and fire properties of PU flexible foam. Journal of Cellular Plastics.2009; vol. 01, pp. 01-30.
• 5. Bian XC, Tang JH, Li ZM. Flame retardancy of whisker silicon oxide/rigid polyurethane foam composites with expandable graphite. Journal of Applied Polymer Science.2008; vol. 110, pp. 3871-3879.
• 6. Bian XC, Tang JH, Li ZM. Flame retardancy of hollow glass microsphere/rigid polyurethane foams in the presence of expandable graphite. Journal of Applied Polymer Science. 2008; vol. 110, pp. 3871-3879.
• 7. Han DS, Park IB, Kimi MH, Noh BJ, Kim WS, Lee JM. The effects of glass fiber reinforcement on the mechanical behavior of polyurethane foam. Journal of Mechanical Science and Technology. 2010; vol. 24, pp. 263-266.
• 8. Indennidate L, Cannoletta D, Lionetto F, Greco A, Maffezzoli A. Nanofilled polyols for viscoelastic polyurethane foams. Society of Chemical Industry. 2009; vol. 59, pp. 486-491.
• 9. Lubguban AA, Tu YC, Lozada ZR, Hsieh FH, Suppes GJ. Noncatalytic polymerization of ethylene glycol and epoxy molecules for rigid polyurethane foam applications. Journal of Applied Polymer Science. 2009; vol. 112, pp. 2185-2194.
• 10. Meng XY, Ye L, Zhang XG, Tang PM, Tang JH, Ji X, Li ZM. Effects of expandable graphite and ammonium polyphosphate on the flame-retardant and mechanical properties of rigid polyurethane foams. Journal of Applied Polymer Science.2009; vol. 114, pp. 853-863.
• 11. Mello D, Pezzin SH, Amico SC. The effect of post-consumer pet particles on the performance of flexible polyurethane foams. Polymer Testing. 2009; vol. 28, pp. 702-708.