Evaluation of corrosion
inhibitors for carbon steel in chlorinated environments is very important for
some industrial plants. For this purpose, the inhibitory effect of
5-nitro-2-furaldehyde on the corrosion of carbon steel in aqueous solution of
0.1 M NaCl and 0.1 M HCl was investigated. Cyclic voltagrams were taken to
determine the electrochemical behavior of carbon steel in non-inhibitory and
inhibitory environments. The corrosion rates of carbon steel in the presence of
5-nitro-2-furaldehyde in different concentrations (10, 20, 50 and 100 ppm) were
measured by the Tafel Polarization method. As the inhibitor concentration
increased, no significant change was detected in the 0.1 M HCl medium. In the
0.1 M NaCl environment, the corrosion potential has shifted to values that are
more positive and the corrosion current has been reduced. This indicates that
the inhibitors form a film on the surface of metal in this environment and
create resistance to corrosion. The best inhibitory activity was achieved with
an inhibitor concentration of 100 ppm in 0.1 M NaCl medium.
This article was submitted as an oral presentation to the 13rd National Chemical Engineering Congress.
Birincil Dil | İngilizce |
---|---|
Konular | Malzeme Üretim Teknolojileri |
Bölüm | Makaleler |
Yazarlar | |
Yayımlanma Tarihi | 15 Kasım 2019 |
Gönderilme Tarihi | 31 Mayıs 2019 |
Kabul Tarihi | 10 Ekim 2019 |
Yayımlandığı Sayı | Yıl 2019 Cilt: 2 Sayı: 2 |
This piece of scholarly information is licensed under Creative Commons Atıf-GayriTicari-AynıLisanslaPaylaş 4.0 Uluslararası Lisansı.
J. Turk. Chem. Soc., Sect. B: Chem. Eng. (JOTCSB)