Carbon monoxide (CO) gas sensing characteristics dependent on Morphological Properties of Ternary Oxide (SnO2/ZnO/TiO2) Nanolayers

Yıl 2020, Cilt: 3 Sayı: 1, 20 - 23, 20.06.2020

Cihat Aydın

Öz

Mixed oxide nanolayer gas sensors were produced by Sol-Gel spin coating method. The morphological and gas sensing properties of thin films were studied in detail. The Atomic Force Microscopy (AFM) was used for analyzing the morphological properties of the thin film. Also electrical properties of the SnO2/ZnO/TiO2 thin films were investigated by using current-voltage (I-t) characteristics measurement. Finally, the Carbon Monoxide sensing property of the each fabricated SnO2/ZnO/TiO2 thin films were investigated and discussed in this study.

Anahtar Kelimeler

Thin film gas sensor, Ternary nanolayers, Morphological properties, Atomic force microscopy

Kaynakça

• [1] P.S. Kolhe, A.B. Shinde, S.G. Kulkarni, N. Maiti, P.M. Koinkar, K.M. Sonawane, Journal of Alloys and Compounds, 748 (2018) 6-11.
• [2] I. Dascalu, S. Somacescu, C. Hornoiu, J.M. Calderon-Moreno, N. Stanica, H. Stroescu, M. Anastasescu, M. Gartner, Process Safety and Environmental Protection, 117 (2018) 722-729.
• [3] R.S. Ganesh, E. Durgadevi, M. Navaneethan, V.L. Patil, S. Ponnusamy, C. Muthamizhchelvan, S. Kawasaki, P.S. Patil, Y. Hayakawa, Sensors and Actuators A: Physical, 269 (2018) 331-341.
• [4] C. Aydin, Journal of Alloys and Compounds, 777 (2019) 145-151.
• [5] C. Aydin, Journal of Materials Science: Materials in Electronics, 29 (2018) 20087-20096.
• [6] C. Aydin, Journal of Nanoelectronics and Optoelectronics, 13 (2018) 1460-1467.
• [7] C. Aydın, Ceramics International, 44 (2018) 17473-17478.
• [8] C. Aydın, H.M. El-Nasser, F. Yakuphanoglu, I.S. Yahia, M. Aksoy, Journal of Alloys and Compounds, 509 (2011) 854-858.
• [9] C. Aydin, H. Aydin, M. Taskin, F. Yakuphanoglu, Journal of Nanoscience and Nanotechnology, 19 (2019) 2547-2555.
• [10] H. Aydın, F. Yakuphanoglu, C. Aydın, Journal of Alloys and Compounds, 773 (2019) 802-811.
• [11] C. Aydın, S.A. Mansour, Z.A. Alahmed, F. Yakuphanoglu, Journal of Sol-Gel Science and Technology, 62 (2012) 397-403.
• [12] H. Aydin, S.A. Mansour, C. Aydin, A.A. Al-Ghamdi, O.A. Al-Hartomy, F. El-Tantawy, F. Yakuphanoglu, Journal of Sol-Gel Science and Technology, 64 (2012) 728-733.
• [13] H. Aydin, H.M. El-Nasser, C. Aydin, A.A. Al-Ghamdi, F. Yakuphanoglu, Applied Surface Science, 350 (2015) 109-114.
• [14] H. Aydin, C. Aydin, A.A. Al-Ghamdi, W.A. Farooq, F. Yakuphanoglu, Optik, 127 (2016) 1879-1883.
• [15] C. Aydın, O.A. Al-Hartomy, A.A. Al-Ghamdi, F. Al-Hazmi, I.S. Yahia, F. El-Tantawy, F. Yakuphanoglu, Journal of Electroceramics, 29 (2012) 155-162.
• [16] C. Aydin, M.S. Abd El-sadek, K.B. Zheng, I.S. Yahia, F. Yakuphanoglu, Optics and Laser Technology, 48 (2013) 447-452.
• [17] C. Aydın, M. Benhaliliba, A.A. Al-Ghamdi, Z.H. Gafer, F. El-Tantawy, F. Yakuphanoglu, Journal of Electroceramics, 31 (2013) 265-270.
• [18] C. Aydın, Journal of Alloys and Compounds, 771 (2019) 964-972.
• [19] M. Benhaliliba, C.E. Benouis, F. Yakuphanoglu, A. Tiburcio-Silver, C. Aydin, S. Hamzaoui, Z. Mouffak, Journal of Alloys and Compounds, 527 (2012) 40-47.
• [20] H. Aydin, Journal of Nanoelectronics and Optoelectronics, 9 (2014) 608-613.
• [21] H. Aydin, A. Tataroglu, A.A. Al-Ghamdi, F. Yakuphanoglu, F. El-Tantawy, W.A. Farooq, Journal of Alloys and Compounds, 625 (2015) 18-25.
• [22] H. Aydin, B. Gündüz, C. Aydin, Synthetic Metals, 252 (2019) 1-7.