Study of Physical and Electrical Properties of Sandwich Compound as Drug Delivery to Transport Chlorpheniramine Medication Using Density Functional Theory

Yıl 2023, Cilt: 6 Sayı: 2, 124 - 131, 18.12.2023

Huda M. Jawad , Tahseen Ahmed Husain , Ibrahim Nazem Qader

https://doi.org/10.54565/jphcfum.1401084

Öz

Sandwich compounds have widespread applications in fields such as medicine, molecular electronics, and pharmacology. This study is an attempt to design drug delivery by using a di-benzene chromium sandwich compound Cr(η6-C6H6)2 to transport chlorpheniramine medication (C16H19ClN2). Some of the electronic and spectrum properties of the sandwich compounds and chlorpheniramine medication using density functional theory (DFT) and the B3LYP/6-31G (d,p) basis set were investigated. The sandwich compound, chlorpheniramine, and the sandwich compound bonded with chlorpheniramine were evaluated by studying the geometry optimization and calculating the HOMO and LUMO, bond length, energy gap, UV-VIS, IR spectrum, and force constant for the three compounds. These calculations highlight several features of the new compound, including strength and higher stability. In the investigation, it was observed that the UV-VIS and IR spectra for the new compound exhibits shifts towards longer wavelengths absorptions. The energy gap values for the three compounds were determined to be 2.1768 eV, 4.813 eV, and 3.0557 eV, respectively, while the force constant values were measured as 3 mDyne/Å, 2.7 mDyne/Å, and 4 mDyne/Å.

Anahtar Kelimeler

Sandwich compounds, Chlorpheniramine, di-benzene chromium, Drug Delivery

Kaynakça

• Ateş, E., Aztekın, K. (2011). Parçacık ve fiber takviyeli polimer kompozilerin yoğunluk ve basma dayanımı özellikleri. Journal of the Faculty of Engineering & Architecture of Gazi University, 26(2).
• Mustaţă, F., & Cascaval, C. N. (1997). Rheological and thermal behaviour of an epoxy resin modified with reactive diluents. Journal of polymer engineering, 17(6), 491-506.
• Mustata, F., Cascaval, CN. and Bicu, I. (1995). Viscosimetric investigation of plasticized epoxy resin. Polymer Plast Technol Eng, 34,461–73.
• Mustatâ, F., & Bicu, I. (1998). Plastified epoxy resins modified by hydrophilic and hydrophobic silica. Polymer–Plastics Technology and Engineering, 37(2), 127-140.
• Munz, M., Sturm, H., & Stark, W. (2005). Mechanical gradient interphase by interdiffusion and antiplasticisation effect—study of an epoxy/thermoplastic system. Polymer, 46(21), 9097-9112.
• Sánchez-Cabezudo, M., Prolongo, M., Salom, C., & Masegosa, R. (2006). Cure kinetics of epoxy resin and thermoplastic polymer. Journal of thermal analysis and calorimetry, 86(3), 699-705.
• Prolongo, MG., Arribas, C., Salom, C. and Masegosa, RM. (2007). Phase separation, cure kinetics, and morphology of epoxy/poly(vinyl acetate)blends. J Appl Polym Sci. 103, 1507–16.
• Nakamura, Y., Yamaguchi, M., Okubo, M.and Matsumoto, T. (1992). Effects of particle size on mechanical and impact properties of epoxy resin filled with spherical silica. J Appl Polym Sci. 45:s.1281–9.
• Erdogan, BC., Seyhan, AT., Ocak, Y., Tanoglu, M., Balkose, D., and Ulku, S. (2008). Cure kinetics of epoxy resin–natural zeolite composites. J Thermal Anal Calorim 94: s.743–7.
• Francis, B., Lakshmana Rao, V., Geert, VP., Posada, F., Groeninckx, G. and Ramaswamy, R.,(2006).et al. Cure kinetics, morphological and dynamic mechanical analysis of diglycidyl ether of bisphenol-A epoxy resin modified with hydroxyl terminated poly(etherether ketone) containing pendent tertiary buthyl groups. Polymer 47: s.5411–9.
• Francis, B., Thomas, S., Jose, J., Ramaswamy, R., Lakshmana Rao ,V. (2005). Hydroxyl terminated poly(ether ether ketone) with pendent methyl group toughened epoxy resin:miscibility, morphology and mechanical properties. Polymer 46: s.12372–85.
• Mazumdar, S. K.(2001). Composites manufacturing: Materials, product and process engineering. USA: CRC Press.
• Dai, H.(2001). Material, Process and Product Design of Thermoplastic Composite Materials,Prude University, Proquest Information and Learning.
• Sönmez, M. (2009). Polimer Matrisli Kompozitlerin Endüstri Ürünler Tasarımında Önemi Ve Geleceği: Türkiye’den Dört Örnek Firma Üzerine Bir İnceleme, İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü.
• Pala, İ. (2015). Tekstil lifleri ile takviyelendirilmiş kompozit malzemelerin ürün tasarımında kullanılması, İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, s. 26.
• Aydin C., Aydin H. The synthesis and optical dispersions parameters of Cadmium doped Tin-oxide thin films by the Sol-Gel method, Journal of Physical Chemistry and Functional Materials, 4 (2021) 42-48.
• Aydin C, Synthesis of Pd:ZnO nanofibers and their optical characterization dependent on modified morphological properties, Journal of Alloys and Compounds, 777 (2019) 145-151.
• Aydin C, The functionalization of morphological, structural and optical properties of Fe doped SnO2 nanocrystals synthesized by the sol–gel method, Journal of Materials Science: Materials in Electronics, 29 (2018) 20087-20096.
• H. Aydin, C. Aydin, A.A. Al-Ghamdi, W.A. Farooq, F. Yakuphanoglu, Refractive index dispersion properties of Cr-doped ZnO thin films by sol-gel spin coating method, Optik, 127 (2016) 1879-1883.
• Aydin C, N.M. Khusayfan, A.A. Al-Ghamdi, F. El-Tantawy, W.A. Farooq, F. Yakuphanoglu, Facile synthesis, electrical and optical properties of Cu-doped GaN nanorods by sol-gel technique, Journal of Sol-Gel Science and Technology, 78 (2016) 68-75.
• Aydin H, H.M. El-Nasser, C. Aydin, A.A. Al-Ghamdi, F. Yakuphanoglu, Synthesis and characterization of nanostructured undoped and Sn-doped ZnO thin films via sol-gel approach, Applied Surface Science, 350 (2015) 109-114.
• Aydin H, A. Tataroglu, A.A. Al-Ghamdi, F. Yakuphanoglu, F. El-Tantawy, W.A. Farooq, A novel type heterojunction photodiodes formed junctions of Au/LiZnSnO and LiZnSnO/p-Si in series, Journal of Alloys and Compounds, 625 (2015) 18-25.
• A. Orhan, C. Aydin, H. Aydin, A.A. Al-Ghamdi, F. El-Tantawy, F. Yakuphanoglu, Synthesis and optical properties of iron doped gallium nitride nanostructures by sol gel method, Microsystem Technologies-Micro-and Nanosystems-Information Storage and Processing Systems, 21 (2015) 1219-1224.
• Aydin C, M.S. Abd El-sadek, K.B. Zheng, I.S. Yahia, F. Yakuphanoglu, Synthesis, diffused reflectance and electrical properties of nanocrystalline Fe-doped ZnO via sol-gel calcination technique, Optics and Laser Technology, 48 (2013) 447-452.
• M. Soylu, H. Aydin, A.A. Al-Ghamdi, W.A. Farooq, F. Yakuphanoglu, Study of optical and electrical assessments of the quaternary MgZnSnO system containing different Mg content, Journal of Materials Science: Materials in Electronics, 25 (2014) 4235-4245.
• H. Aydin, A. Tataroğlu, A.A. Al-Ghamdi, F. Yakuphanoglu, F. El-Tantawy, W.A. Farooq, A novel type heterojunction photodiodes formed junctions of Au/LiZnSnO and LiZnSnO/p-Si in series, Journal of Alloys and Compounds, 625 (2015) 18-25.
• H. Aydin, Electrical and Optical Properties of Titanium Dioxide-Carbon Nanotube Nanocomposites, Journal of Nanoelectronics and Optoelectronics, 9 (2014) 608-613.
• M. Benhaliliba, C.E. Benouis, F. Yakuphanoglu, A. Tiburcio-Silver, C. Aydin, S. Hamzaoui, Z. Mouffak, Detailed investigation of submicrometer-sized grains of chemically sprayed (Sn1−xAlx, O2) (0≤x≤0.085) thin films, Journal of Alloys and Compounds, 527 (2012) 40-47.
• H. Aydin, S.A. Mansour, C. Aydin, A.A. Al-Ghamdi, O.A. Al-Hartomy, F. El-Tantawy, F. Yakuphanoglu, Optical properties of nanostructure boron doped NiO thin films, Journal of Sol-Gel Science and Technology, 64 (2012) 728-733.