Development of Personal Protective Respirator Based on Additive Manufacturing Technologies in Fighting Against Pandemic

Yıl 2021, Cilt: 4 Sayı: 1, 24 - 38, 31.05.2021

Levent Aydın , Sumeyya Ilkin , Mehmet Onur Arıcan , Ayfer Peker , Suhap Şahin , Güralp Özkoç , Maksut Görkem Aksu Serdar Küçük , Özcan Gündoğdu

https://doi.org/10.34088/kojose.833205

Cited By: 1

Öz

Flexible manufacturing systems have been widely used especially in the field of medicine to develop personal protective types of equipment such as ventilator components or sample collection apparatuses except the face visors and masks/respirators during the fight against the pandemic. In this study, an N95 derivative respirator was designed based on the FDM technology and then compared with similar known mask models in literature in terms of manufacturing costs and functionality. Optimization was carried out on printing parameters to improve the speed of manufacturing. Finally, all components of the mask were assembled and prepared to be used for medical needs during the pandemic. The cost of the mask and filter components were reduced to 7 ₺ for 2 hours and 32 minutes for each mask. Moreover, the durability of each mask was increased three times more than known protective types of equipment to offer longer usage without any fractures caused by daily activities and to have improved airtightness. Besides, the mask was designed to have multi-layered filters with the ability of replaceable membranes according to the epidemic agent, and the sterilization procedures were explained. Thus, a more economical and healthier protective equipment was created compared to the known respirators in the literature.

Anahtar Kelimeler

Covid-19, FDM, Mask, Respirator, N95, Pandemic

Destekleyen Kurum

Kocaeli Üniversitesi, BAP Koordinasyon Birimi

Proje Numarası

FHD-2020-2220

Teşekkür

This study was financially supported by BAP Project (FHD-2020-2220) of Kocaeli University.

Kaynakça

• [1] WHO, 2020. Naming the Coronavirus Disease (COVID-19) And the Virus That Causes It. https://www.who.int/emergencies/diseases/novel-coronavirus-2019/technical-guidance/naming-the-coronavirus-disease-(covid-2019)-and-the-virus-that-causes-it. (Access Date: 20.11.2020).
• [2] Wikipedia, 2020. COVID-19 Pandemic. https://en.wikipedia.org/wiki/COVID-19_pandemic. (Access Date: 20.11.2020).
• [3] TR Ministry of Health Scientific Advisory Board Study, 2020. Covid-19 Adult Patient Treatment. http://www.solunum.org.tr/TusadData/userfiles/file/covid-19_rehberi_eriskin_hasta_tedavisi.pdf. (Access Date: 20.11.2020).
• [4] Choong Y.Y.C., Tan H.W., Patel D.C., Choong W.T.N., Chen C.H., Low H.Y., Tan M.J., Patel C.D., Chua C.K., 2020. The Global Rise of 3D Printing During the COVID-19 Pandemic. Nature Reviews Materials 5, pp. 637-639.
• [5] Ishack S., Lipner S.R., 2020. Applications of 3D Printing Technology to Address COVID-19 Related Supply Shortages. The American Journal of Medicine 2, pp. 1-14.
• [6] FDA, 2020. FDA’s Role in 3D Printing. https://www.fda.gov/medical-devices/3d-printing-medical-devices/fdas-role-3d-printing, (Access Date: 10.10.2020).
• [7] Clifton W., Damon A., Martin A.K., 2020. Considerations and Cautions for Three-Dimensional-Printed Personal Protective Equipment in the COVID-19 Crisis. 3D Printing and Additive Manufacturing 7, pp. 97-99.
• [8] CDC, 2020. Strategies for Optimizing the Supply of Facemasks. https://www.cdc.gov/coronavirus/2019-ncov/hcp/ppe-strategy/face-masks.html. (Access Date: 03.04.2020).
• [9] NIH, 2020. COVID-19 Supply Chain Response. https://3dprint.nih.gov/collections/covid-19-response. (Access Date: 03.04.2020).
• [10] Attaran M., 2020. 3D Printing Role in Filling the Critical Gap in the Medical Supply Chain During COVID-19 Pandemic. American Journal of Industrial and Business Management 10, pp. 988-1001.
• [11] Ishack S., Lipner S.R., 2020. Applications of 3D Printing Technology to Address COVID-19 Related Supply Shortages. The American Journal of Medicine 133, pp. 771-773.
• [12] Mostaghimi A., Antonini M.J., Plana D., Anderson P.D., Beller B., Boyer E.W., Fannin A., Freake J., Oakley R., Sinna M.S., Smith L., Van C., Yang H., Sorger P.K., LeBoeuf N.R., Yu S.H., 2020. Regulatory and Safety Considerations in Deploying a Locally Fabricated, Reusable Face Shield in a Hospital Responding to the Covid-19 Pandemic. Med 1, pp. 1-18.
• [13] Long J., Gholizadeh H., Lu J., Bunt C., Seyfoddin A., 2017. Application of Fused Deposition Modelling (FDM) Method of 3D Printing in Drug Delivery. Current Pharmaceutical Design 23, pp. 433-439.
• [14] Chen M.Y., Skewes J., Woodruff M.A., Dasgupta P., Rukin N.J., 2020. Multi-Colour Extrusion Fused Deposition Modelling: A Low-Cost 3D Printing Method for Anatomical Prostate Cancer Models. Scientific Reports 10, pp. 1-5.
• [15] Rengier F., Mehndiratta A., Von Tengg-Kobligk H., Zechmann C., Unterhinninghofen R., Kauczor H., Giesel F., 2010. 3D Printing Based on Imaging Data: Review of Medical Applications. International Journal of Computer Assisted Radiology and Surgery 5, pp. 335-341.
• [16] Ilardo R., Williams C., 2010. Design and Manufacture of a Formula SAE Intake System Using Fused Deposition Modeling and Fiber-Reinforced Composite Materials. Rapid Prototyping Journal 16, pp. 174-179.
• [17] Shofner M., Lozano K., Rodríguez‐Macías F., Barrera E., 2003. Nanofiber‐Reinforced Polymers Prepared by Fused Deposition Modeling. Journal of Applied Polymer Science 89, pp. 3081-3090.
• [18] Heller B., Smith D., Jack D., 2015. The Effects of Extrudate Swell, Nozzle Shape, And the Nozzle Convergence Zone on Fiber Orientation in Fused Deposition Modeling Nozzle Flow. American Society of Composites-30th Technical Conference, Michigan, USA, 28-30 September, pp. 1220-1236.
• [19] Neupane B., Giri B., 2020. Current Understanding on the Effectiveness of Face Masks and Respirators to Prevent the Spread of Respiratory Viruses. engrXiv, https://doi.org/10.31224/osf.io/h3wgc.
• [20] CDC - NIOSH - Respirator Fact Sheet. Understanding Respiratory Protection Against SARS, https://www.cdc.gov/niosh/npptl/topics/respirators/factsheets/respsars.html. (Access Date: 03.04.2020).
• [21] Wigglesworth N., 2019. Infection Control 5: Equipment for Facial and Respiratory Protection. Nursing Times 10, pp. 30-32.
• [22] Deneysan, 2020. Havalandırma. http://deneysan.com/Content/images/documents/havalandirma-3_63272884.pdf. (Access Date: 03.04.2020).
• [23] Airfuji, 2020. Hepa Versus MERV Filters. https://airfuji.com/hepa-vs-merv. (Access Date: 10.06.2020).
• [24] He H., Gao M., Illés B., Molnar K., 2020. 3D Printed and Electrospun, Transparent, Hierarchical Polylactic Acid Mask Nanoporous Filter. International Journal of Bioprinting 6, pp. 1-9.
• [25] Bulus E., Bulus G.S., Yakuphanoglu F., 2020. Production of Polylactic Acid-Activated Charcoal Nanofiber Membranes For COVID-19 Pandemic by Electrospinning Technique and Determination of Filtration Efficiency. Journal of Materials and Electronic Devices 4, pp. 21-26.
• [26] Ahmed M.K., Afifi M., Uskoković V., 2020. Protecting Healthcare Workers During COVID-19 Pandemic with Nanotechnology: A Protocol for A New Device from Egypt. Journal of Infection and Public Health 13, pp. 1243-1246.
• [27] Wikipedia, 2020. Air Filters. https://en.wikipedia.org/wiki/Air_filter#Filter_classes. (Access Date: 10.06.2020).
• [28] European Standard EN 1822-1:2009, High Efficiency Air Filters (EPA, HEPA and ULPA). https://standards.iteh.ai/catalog/standards/cen/46f566b7-2405-4a14-988c-8436402d0975/en-1822-1-2009. (Access Date: 10.06.2020).
• [29] Bosch, Elektrikli Süpürgeler. https://www.bosch-home.com.tr/urun-listesi/elektrikli-supurgeler/toz-torbasiz-elektrikli-supurgeler/BGC41Q69. (Access Date: 20.06.2020).
• [30] Fersan, Hepa Filtre Nedir. https://www.bosch-home.com.tr/urun-listesi/elektrikli-supurgeler/toz-torbasiz-elektrikli-supurgeler/BGC41Q69. (Access Date: 20.06.2020).
• [31] Tcharkhtchi A., Abbasnezhad N., Seydani M.Z., Zirak N., Farzaneh S., Shirinbayan M., 2020. An Overview of Filtration Efficiency Through the Masks: Mechanisms of the Aerosols Penetration. Bioactive Materials 6, pp. 106-122.
• [32] BBC, 2020. Coronavirus: Robots Use Light Beams to Zap Hospital Viruses. Journal of Infection and Public Health. https://www.bbc.com/news/business-51914722. (Access Date: 08.07.2020).
• [33] Darnell M.E., Subbarao K., Feinstone S.M., Taylor D.R., 2004. Inactivation of the Coronavirus That Induces Severe Acute Respiratory Syndrome, SARS-CoV. Journal of Virological Methods 121, pp. 85-91.
• [34] Cults, 2020. N95 Masks Against Coronavirus - Hack the Pandemic. https://cults3d.com/en/3d-model/tool/n95-masks-against-coronavirus-covid19-hackthepandemic. (Access Date: 10.07.2020).
• [35] Cults, 2020. N95 Masks Against Coronavirus - Hack the Pandemic. https://cults3d.com/en/3d-model/tool/covid-19-mask-easy-to-print-no-support-filter-required. (Access Date: 10.07.2020).
• [36] Cults, 2020. N95 Masks Against Coronavirus - Hack the Pandemic. https://cults3d.com/en/3d-model/tool/covid-19-mask-easy-to-print-no-support-modified-version. (Access Date: 10.07.2020).
• [37] Cults, 2020. N95 Masks Against Coronavirus - Hack the Pandemic. https://cults3d.com/en/3d-model/tool/masque-de-protection-covid-19-epi-equipement-individuel-de-secours. (Access Date: 10.07.2020).
• [38] Cults, 2020. N95 Masks Against Coronavirus - Hack the Pandemic. https://cults3d.com/en/3d-model/tool/reusable-facial-mask-frame. (Access Date: 10.07.2020).
• [39] Cults, 2020. N95 Masks Against Coronavirus - Hack the Pandemic. https://cults3d.com/en/3d-model/fashion/respirator-breathing-mask-with-hepa-filter. (Access Date: 10.07.2020).
• [40] Cults, 2020. N95 Masks Against Coronavirus - Hack the Pandemic. https://cults3d.com/en/3d-model/various/mask-antvirus. (Access Date: 10.07.2020).
• [41] Cults, 2020. N95 Masks Against Coronavirus - Hack the Pandemic. https://cults3d.com/en/3d-model/tool/covid-19-mask-easy-to-print-no-support-filter-required. (Access Date: 10.07.2020).
• [42] Cults, 2020. N95 Masks Against Coronavirus - Hack the Pandemic. https://cults3d.com/en/3d-model/tool/h1-heavy-mask. (Access Date: 10.07.2020).
• [43] Cults, 2020. N95 Masks Against Coronavirus - Hack the Pandemic. https://cults3d.com/en/3d-model/various/masque-fmp-imalize-securite-covid-19-facile-a-imprimer-aucun-support-filtre-requis. (Access Date: 10.07.2020).
• [44] Cults, 2020. N95 Masks Against Coronavirus - Hack the Pandemic. https://cults3d.com/en/3d-model/various/vmo-mask-v2-coronavirus-covid-19. (Access Date: 10.07.2020).
• [45] Cults, 2020. N95 Masks Against Coronavirus - Hack the Pandemic. https://cults3d.com/en/3d-model/various/vmo-mask-v3-coronavirus-covid-19-improved-version. (Access Date: 10.07.2020).
• [46] Cults, 2020. N95 Masks Against Coronavirus - Hack the Pandemic. https://cults3d.com/en/3d-model/tool/nanohack-2-0-n95-masks-against-coronavirus-covid19-hackthepandemic. (Access Date: 10.07.2020).
• [47] Cults, 2020. N95 Masks Against Coronavirus - Hack the Pandemic. https://cults3d.com/en/3d-model/tool/masque-ffp2-reel-filtration-covid-19. (Access Date: 10.07.2020).
• [48] Cults, 2020. N95 Masks Against Coronavirus - Hack the Pandemic. https://cults3d.com/en/3d-model/gadget/respirator-mask-removable-filter. (Access Date: 10.07.2020).
• [49] Cults, 2020. N95 Masks Against Coronavirus - Hack the Pandemic. https://cults3d.com/en/3d-model/various/mask-l-n95-with-modular-filters-adult-version. (Access Date: 10.07.2020).
• [50] Cults, 2020. N95 Masks Against Coronavirus - Hack the Pandemic. https://cults3d.com/en/3d-model/various/reusable-mask-ppe-alternative-malamask. (Access Date: 10.07.2020).
• [51] Cults, 2020. N95 Masks Against Coronavirus - Hack the Pandemic. https://cults3d.com/en/3d-model/various/cov3d-v2-08-fdm-3d-print-optimised-mask-in-15-sizes-also-for-children. (Access Date: 10.07.2020).
• [52] Cults, 2020. N95 Masks Against Coronavirus - Hack the Pandemic. https://cults3d.com/en/3d-model/tool/another-cap-for-covid-19-mask. (Access Date: 10.07.2020).
• [53] Novak J.I., Loy J., 2020. A Quantitative Analysis Of 3D Printed Face Shields and Masks During COVID-19. Emerald Open Research 2, pp. 1-14.
• [54] Tino R., Moore R., Antoline S., Ravi P., Wake N., Ionita C.N., Morris J.M., Decker S.J., Sheikh A., Rybicki F.J., Chepelev, L.L., 2020. COVID-19 and the role of 3D printing in medicine. 3D Printing in Medicine 6, pp. 1-8.
• [55] WASP, 2020. 3D Printed Mask From 3D Scanning. https://www.3dwasp.com/en/3d-printed-mask-from-3d-scanning. (Access Date: 10.07.2020).
• [56] NIH, 2020. GLWTechLLC. https://3dprint.nih.gov/discover/3dpx-013363-0. (Access Date: 10.07.2020).
• [57] Vaňková E., Kašparová P., Khun J., Machková A., Julák J., Sláma M., Hodek J., Ulrychová L., Weber J., Obrová K., Kosulin K., Lion T., Scholtz V., 2020. Polylactic Acid as A Suitable Material For 3D Printing of Protective Masks in Times Of COVID-19 Pandemic. PeerJ 8, https://doi.org/10.7717/peerj.10259.
• [58] Leung W.W.F., Sun, Q., 2020. Electrostatic Charged Nanofiber Filter for Filtering Airborne Novel Coronavirus (COVID-19) And Nano-Aerosols. Separation and Purification Technology 116886, pp. 1-17.
• [59] Pedro M., 2020. Filter Considerations in the COVID-19 Era. https://www.vyaire.com/sites/default/files/ 2020-06/vyr-gbl-2000294-filter-considerations-in-the-covid-19-era-wp_final.pdf. (Access Date: 10.10.2020).
• [60] Ortiz L.W., Soderholm S.C., Valdez F.O., 1988. Penetration of Respirator Filters by An Asbestos Aerosol. American Industrial Hygiene Association Journal 49, pp. 451-460.
• [61] Wilson A. M., Abney S. E., King M. F., Weir M. H., López-García M., Sexton J. D., Reynolds K. A., 1988. COVID-19 and Non-Traditional Mask Use: How Do Various Materials Compare in Reducing the Infection Risk for Mask Wearers? The Journal of Hospital Infection 105, pp. 640-642.
• [62] Darnell M. E., Subbarao K., Feinstone S. M., Taylor D. R., 2004. Inactivation of The Coronavirus That Induces Severe Acute Respiratory Syndrome. Journal of Virological Methods 121, pp. 85-91.