MEKANİK HESAPLAMA YARDIMCILARININ TARİHİ

Yıl 2025, Sayı: 28, 23 - 42, 29.01.2025

Cemal Elitaş

Öz

Hesaplama teknolojisi, mekanik hesaplama yardımcılarıyla ilgilenen konu alanı olarak anlaşılmalıdır. Tarihsel perspektifte hesaplama araçlarının oldukça fazla sayıda olduğu görülmektedir, bunlardan bazıları; parmaklar, el, çakıl taşı, çetele, çentik, kabuk, düğümlü ip, abaküs, abaküs kumaşı, abaküs derisi, abaküs kuruşu, abaküs kitabı, tüy, kalem (kalem), kâğıt, tebeşir, hesaplama diski, hesaplama silindiri, sayı kaydırıcı, mekanik, elektrik, elektronik hesaplama makinesi, kuantum bilgisayar vb. Bu nedenle hesaplama teknolojisi, teknoloji ve matematiğin, bilgisayar biliminin, elektrik mühendisliğinin, makine mühendisliğinin, fiziğin ana konusudur. “Hesaplama teknolojisi”, cihazların yanı sıra, sözlü ve yazılı hesaplamalar için hesaplama sürecini, manuel ve mekanik hesaplama prosedürünü de ifade etmektedir. Bu inceleme çalışması yalnızca mekanik hesaplama teknolojisi araç-gereçleri ile ilgilenmiştir.

Anahtar Kelimeler

Mekanik Hesaplama Yardımcısı, Muhasebe, Matematik, Hesaplama Teknolojisi

HISTORY OF MECHANICAL CALCULATION AIDS

Öz

Computational technology should be understood here as the subject area that deals with mechanical calculation aids. In historical perspective, it is seen that there are quite a lot of calculation tools, some of them are; fingers, hand, pebble, scoreboard, notch, shell, knotted string, abacus, abacus cloth, abacus skin, abacus penny, abacus book, feather, pen (pencil), paper, chalk, calculating disk, calculating cylinder, number slider, mechanical, electrical, electronic calculating machine, quantum computer etc. Therefore, computational technology is the main subject of technology and mathematics, computer science, electrical engineering, mechanical engineering, physics. “Calculation technology” refers to the calculation process, manual and mechanical calculation procedure for oral and written calculations, as well as devices. This review study has only dealt with mechanical computing technology tools and equipment.

Anahtar Kelimeler

Mechanical Calculation Assistant, Accounting, Mathematics, Calculation Technology

Kaynakça

• Altıparmak, K. (2016). The teachers views on Soroban abacus training, International Journal of Research in Education and Science (IJRES) 2 (1): 172–178.
• Barner, D., Alvarez, G., Sullivan, J., Brooks, N., Srinivasan, M. ve Frank, M.C. (2016). Learning mathematics in a visuospatial format: A randomized, controlled trial of mental abacus instruction, Child Development 87 (4): 1146–1158.
• Bruderer, H. (2015). Meilensteine der Rechentechnik, Berlin: De Gruyter Oldenbourg.
• Dear, P. (2010). Divine Illumination, Mechanical Calculators, and the Roots of Modern Reason, Cambridge University Press, 23(3), 351-366.
• Drijvers, P., Doorman, M., Boon, P., Reed, H. ve Gravemeijer, K. (2010). The teacher and the tool: Instrumental orchestrations in the technology-rich mathematics classroom, Educational Studies in Mathematics, 75 (2): 213–234.
• Freiman, V. ve Volkov, A. (2018). History of Computations, Computing Devices, and Mathematics Education from the Teaching and Learning Perspective: Looking for New Paths of Investigation, Editör: Alexei Volkov ve Viktor Freiman, Computations and Computing Devices in Mathematics Education Before the Advent of Electronic Calculators, Springer Nature Switzerland AG 2018, ss. 3-21.
• Julius, G. A. (1920). Mechanical aids to calculation, Transactions of the Institution of Engineers, Australia, (1), 221-247.
• Khudson, K. (2016). Use your fingers: The abacus just might improve your arithmetic abilities, Forbes (online edition) article published on April 28, 2016, https://www.forbes.com/sites/kevinknudson/2016/04/28/use-your-fingers-the-abacus-just-might-improveyour-arithmetic-abilities/#5de9e66b48cc, Erişim Tarihi: 25 Haziran 2024.
• Macmillan, R. (1996). A Hundred Years of Calculating Aids, The Mathematical Gazette, 80(487), 101-105.
• Martinovic, D., Freiman,V. ve Karadağ, Z. (2013). Visual mathematics and cyber learning, Editör: Dragana Martinovic ve Viktor Freiman, Series Mathematics Education in the Digital Era, Vol. 1 Series, Dordrecht, Springer + Business Media.
• Meyer, J. (2024). Vom Kerbholz zur Curta: Die Geschichte der mechanischen Rechenhilfsmittel, https://www.rechenhilfsmittel.de/ (Erişim Tarihi: 03.04.2024).
• Monaghan, J. ve Trouche, L. (2016). Mathematics teachers and digital tools. Editör: John Monaghan, Luc Trouche, ve Jonathan M. Borwein, Tools and Mathematics: Instruments for learning, Springer, ss. 357–384.
• Pape-Carpantier, M. (1878). Notice sur l’éducation des sens et quelques instruments pédagogiques, Paris, Delagrave.
• Plummer, H. C. (1912). On Aids to Calculation, with special reference to some recently published Tables, Journal of the Institute of Actuaries, 46(2), 193-197.
• Sang, E. (1871). On Mechanical Aids to Calculation, Journal of the Institute of Actuaries and Assurance Magazine, 16(4), 253-265.
• Vasuki, K. (2013). The impact of abacus learning of mental arithmetic on cognitive abilities of children, ALOHA Mental Arithmetic Scientific Report, http://www.alohaspain.com/public/file/ALOHA_Benefits_ScientificReport.pdf Erişim Tarihi: 25.06.2024.