COMPARATIVE ANALYSIS OF FLOTATION EFFICIENCIES BETWEEN MICROFLOTATION CELL AND BATCH FLOTATION CELL TESTS

Yıl 2024, Cilt: 32 Sayı: 2, 1400 - 1406, 12.08.2024

Işıl Tokcan , Hasan Serkan Gökçen

https://doi.org/10.31796/ogummf.1475051

Öz

One of the most important methods in the beneficiation of sulfide ores is flotation. Flotation experiments on a laboratory scale are mainly carried out through batch flotation and microflotation tests. In this study, comparative flotation experiments of pyrite minerals were conducted under the same conditions using the two methods mentioned above. A series of experiments were carried out with different pH values and collector dosages selected as flotation parameters. The highest flotation recovery was obtained at a pH of 7.5 with the use of PAX. Furthermore, within the conditions studied, a correlation of 94% was found between the two flotation techniques when using PAX, while it was 98% in the use of PEX. In this study. It was shown that the microflotation method can be used to estimate the efficiency values that can be obtained with batch flotation experiments.

Anahtar Kelimeler

Batch flotation, Microflotation, Pyrite

MİKROFLOTASYON VE FLOTASYON HÜCRESİ İLE YAPILAN TESTLERİN FLOTASYON VERİMLİLİKLERİNİN KARŞILAŞTIRMALI ANALİZİ

Öz

Sülfürlü cevherlerin zenginleştirilmesinde kullanılan en önemli yöntemlerden birisi flotasyondur. Laboratuvar ölçeğinde flotasyon deneyleri yoğun olarak kesikli flotasyon ve mikroflotasyon testleri aracılığı ile gerçekleştirilmektedir. Bu çalışmada, bahsedilen iki yöntem kullanılarak, pirit mineralinin aynı şartlar altında karşılaştırılmalı flotasyon deneyleri gerçekleştirilmiştir. Flotasyon parametreleri olarak farklı pH ve toplayıcı dozajları seçilerek bir dizi deney yapılmıştır. En yüksek flotasyon verimleri pH 7,5 da PAX kullanımında elde edilmiştir. Ayrıca çalışılan koşullar aralığında, iki flotasyon tekniği arasında PAX kullanımında %94, PEX kullanımda ise %98 korelasyon olduğu tespit edilmiştir. Bu çalışmada kesikli flotasyon testleri ile elde edilebilecek verim değerlerinin tahmini için mikroflotasyon yönteminin kullanabileceği gösterilmiştir

Anahtar Kelimeler

Kesikli flotasyon, Mikroflotasyon, Pirit

Kaynakça

• Ahmadi, R., Khodadadi, D.A., Abdollahy, M. & Fan, M. (2014). Nanomicrobubble flotation of fine and ultrafine chalcopyrite particles. Int. J. Mining Sci. Technol., 24(4):559–566. Doi: https://doi.org/10.1016/j.ijmst.2014.05.021
• Dai, Z., Fornasiero, D. & Ralston, J. (1999). Particle-bubble attachment in mineral flotation. J. Colloid Interface Sci., 217(1):70–76. Doi: https://doi.org/10.1006/jcis.1999.6319
• Derjaguin, B.V. & Dukhin, S.S. (1993). Theory of flotation of small and medium-size particles. Progress Surface Sci., 43(1–4):241–266. Doi: https:// doi. org/ 10. 1016/ 0079- 6816(93) 90034-S
• del Villar, R., Finch, J.A., Gomez, C.O. & Espinoza-Gomez, R. (1992). Minerals Eng., 5(2), 169.
• Dobby, G.S. & Finch, J.A., (1990). Column Flotation, Ch. 7. Pergamon Press
• Dobby, G.S. & Finch, J.A. (1991). Column flotation: A selected review, part II. Minerals Eng., 4(7-11), 911. Doi:https://doi.org/10.1016/0892-875(91)90073-5
• Fuerstenau, M.C., Kuhn, M.C. & Elgillani, D.A. (1968). The role of dixanthogen in xanthate flotation of pyrite. AIME Transactions, June, 148-156.
• Fuerstenau, M.C., Misra, M. & Palmer, B.R. (1990). Xanthate adsorption on selected sulfides in the virtual absence and presence of oxygen. Part I. International Journal of Mineral Processing, 29, 89-98. Doi: https://doi.org/10.1016/0301-7516(90)90007-L
• Gorain, B.K., Franzidis, J.P. & Manlapig, E.V. (2000). Flotation cell design: application of fundamental principles. Julius Kruttschnitt Mineral Research Centre, Indooroopilly Queensland, Australia, 1502-1506.
• Jiang, K., Han, Y., Liu, J., Wang, Y., Ge, W. & Zhang, D. (2023). Experimental and theoretical study of the effect of pH level on the surface properties and floatability of pyrite. Applied Surface Science, 615, 156350.Doi: https://doi.org/10.1016/j.apsusc.2023.156350
• Johansson, G. & Pugh, R.J. (1992). The influence of particle size and hydrophobicity on the stability of mineralized froths. Int. J. Miner. Process., 34, 1–21. Doi:https://doi.org/10.1016/0301-7516(92)90012-L
• Lin, S., Wang, C., Liu, R., Sun, W. & Jing, G. (2022). Surface characterization of molybdenite, bismuthinite, and pyrite to identify the influence of pH on the mineral floatability. Appl. Surf. Sci. 577. Doi:, https://doi.org/10.1016/j. apsusc.2021.151756
• Loewenberg, M. & Davis , R. H. (1994). Flotation rates of fine, spherical particles and droplets. Chem. Eng. Sci., 49: 3923–3941. Doi: https://doi.org/10.1016/0009-2509(94)00200-2
• Luttrell, G.H., Mankosa, M.J. & Yoon, R-H. (1993). Design and scale-up criteria for column flotation. Proc. 18th Int. Minerals Processing Conference, Sydney, 785-791.
• Savassi, O.N. (2005). A compartment model for the mass transfer inside a conventional flotation cell. Int. J. Mineral Process., 77 (2), 65-79. Doi: https://doi.org/10.1016/j.minpro.2005.02.003
• Schwarz, S. & Grano, S. (2005). Effect of particle hydrophobicity on particle and water transport across a flotation froth. Colloids Surf. A., 256, 157–164.Doi:https://doi.org/10.1016/j.colsurfa.2005.01.010
• Trahar, W.J. (1981). A rational interpretation of the role of particle size in flotation. Int. J. Mineral Process., 8(4):289–327. Doi: https:// doi.org/10.1016/0301-7516(81)90019-3
• Wiese, J. & Harris, P. (2012). The effect of frother type and dosage on flotation performance in the presence of high depressant concentrations. Minerals Eng., 36–38,204-210.Doi: https://doi.org/10.1016/j.mineng.2012.03.028
• Xu, D., Ametov, I. & Grano, S.R. (2011). Detachment of coarse particles from oscillating bubbles – the effect of particle contact angle, shape and medium viscosity. Int. J. Miner. Process. 101 (1–4), 50–57. Doi: https://doi.org/10.1016/j.minpro.2011.07.003
• Wark, E.E. & Wark, I.W. (1932). The Physical Chemistry of Flotation III. The relationship between contact angle and the constitution of the collector. J. Phys. Chem., 37 (1) (1932), 805-811.
• Takoungsakdakun, T. & Pongstabodee, S. (2007). Separation of mixed post-consumer PETPOMPVC plastic waste using selective flotation, Sep. Purif. Technol. 54 248–252. Doi: https://doi.org/10.1016/j.seppur.2006.09.011.
• Wang, C.Q., Wang, H., Fu, J.-G. & Liu, Y. N. (2015). Flotation separation of waste plastics for recycling. A review, Waste Manage., 41, 28–38. Doi:https://doi.org/10.1016/j.wasman.2015.03.027
• Negari, M. S., Ostad Movahed, S. &Ahmadpour, A. (2018). Separation of polyvinylchloride (PVC), polystyrene (PS) and polyethylene terephthalate (PET) granules using various chemical agents by flotation technique, Sep. Purif. Technol. 194 368–376. Doi: https://doi.org/10.1016/j.seppur.2017.11.062
• Zhang, F., Zhang, C., Zhang, H., Chen, P., Wang, R. Chen, D., Chen, J., Tian, M. and Sun, W. (2023). Selective Adsorption Mechanism of Ferric Ions on the Surfaces of Chalcopyrite and Pyrite in Flotation, The Minerals, Metals & Materials Society, 4435-4445. Doi: https://doi.org/10.1007/s11837-023-06067-z
• Zhang, L., Peng, W, Wang, W., Cao, Y., Qi, M. & Huang, Y. (2024). A green method for selective separation of molybdenite and pyrite via electrochemical oxidation pretreatment-flotation and its mechanism. Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol. 687, 133508. Doi: https://doi.org/10.1016/j.colsurfa.2024.133508