Cam ve Karbon Elyaf Takviyeli Kompozitlerde Elyaf Cinsinin, Yükün, Kayma Hızı ve Mesafesinin Abrazif Aşınmaya Etkisi

Mehmet Emin Demir; Yahya Hışman Çelik; Erol Kılıçkap

doi:10.2339/politeknik.429642

Araştırma Makalesi

Effect of Fiber Type, Load, Sliding Speed and Distance on Abrasive Wear of Glass and Carbon Fiber Reinforced Composites

Yıl 2019, Cilt: 22 Sayı: 4, 811 - 817, 01.12.2019

Mehmet Emin Demir , Yahya Hışman Çelik , Erol Kılıçkap

https://doi.org/10.2339/politeknik.429642

Cited By: 5

Öz

Today, glass and carbon fiber reinforced composites
have a wide range of applications in many engineering fields. In this work,
abrasive wear in dry sliding conditions of glass and carbon fiber reinforced
composite bars has been carried out. In the experiments, which conducted on the
pin on disc device, the influence of the fiber type, the applied load(5, 10 and
15 N): the sliding speed(0.4, 0.6 and 0.8 m/s) and the sliding distance(250,
500 and 750 m) on the tribological behaviour of the composites was investigated.
As a result of the studies, it was determined that the coefficient of friction
of glass fiber reinforced composite was lower than the coefficient of friction
of carbon fiber reinforced composite. In mass loss depending on wear, mass loss
in the glass fiber was found to be less for all conditions. It has been found
that increasing load, sliding speed and distance increased mass loss. The
highest mass loss for glass and carbon fiber reinforced composites were
achieved with the load of 15 N, the sliding speed of 0.8 m/s and the sliding
distance of 750 m.

Anahtar Kelimeler

Abrasive wear, GFRP composite, CFRP composite

Kaynakça

[1] Siddhartha and K. Gupta, Mechanical and abrasive wear characterization of bidirectional and chopped E-glass fiber reinforced composite materials, Materials & Design 35, 467–479, 2012.
[2] H. Pihtili and N. Tosun, Effect of load and speed on the wear behaviour of woven glass fabrics and aramid fibre-reinforced composites, Wear 252 (11–12), 979–984, 2002.
[3] T. P. Sathishkumar, S. Satheeshkumar and J. Naveen, Glass fiber-reinforced polymer composites-A review, Journal of Reinforced Plastics and Composites 33 (13), 1258–1275, 2014.
[4] J. P. Davim and R. Cardoso, Effect of the reinforcement (carbon or glass fibres) on friction and wear behaviour of the PEEK against steel surface at long dry sliding, Wear 266 (7–8), 795–799, 2009.
[5] B. Suresha, G. Chandramohan, P. Samapthkumaran, S. Seetharamu and S. Vynatheya, Friction and wear characteristics of carbon-epoxy and glass-epoxy woven roving fiber composites, Journal of Reinforced Plastics and Composites 25 (7), 771–782, 2006.
[6] B. Suresha and K. N. S. Kumar, Investigations on mechanical and two-body abrasive wear behaviour of glass/carbon fabric reinforced vinyl ester composites, Materials & Design 30 (6), 2056–2060, 2009.
[7] G. Srinath and R. Gnanamoorthy, Effect of short fibre reinforcement on the friction and wear behaviour of nylon 66, Applied Composite Materials 12 (6), 369–383, 2005.
[8] H. H. Parikh and P. P. Gohil, Tribology of fiber reinforced polymer matrix composites-A review, Journal of Reinforced Plastics and Composites, 34 (16), 1340-1346, 2015.
[9] M. A. Chowdhury, D. M. Nuruzzaman, B. K. Roy, S. Samad, R. Sarker and A. H. M. Rezwan, Experimental investigation of friction coefficient and wear rate of composite materials sliding against smooth and rough mild steel counterfaces, Tribology in Industry, 35 (4), 286-296, 2013.
[10] H. Pihtili, An experimental investigation of wear of glass fibre-epoxy resin and glass fibre-polyester resin composite materials, European Polymer Journal 45 (1), 149–154, 2009.
[11] S. Zhou, Q. Zhang, C. Wu and J. Huang, Effect of carbon fiber reinforcement on the mechanical and tribological properties of polyamide6/polyphenylene sulfide composites, Materials & Design 44, 493–499, 2013.
[12] P. Sarkar, N. Modak and P. Sahoo, Effect of normal load and velocity on continuous sliding friction and wear behavior of woven glass fiber reinforced epoxy composite, Materials Today: Proceeding 4 (2), 3082–3092, 2017.
[13] B. Suresha, K. S. Kumar, S. Seetharamu and P. S. Kumaran, Friction and dry sliding wear behavior of carbon and glass fabric reinforced vinyl ester composites, Tribology International 43, 602–609, 2010.
[14] C. P. Gao, G. F. Guo, F. Y. Zhao, T. M. Wang, B. Jim, B. Wezel, G. Zhang, Q. H. Wang, Tribological behaviors of epoxy composites under water lubrication conditions, Tribiology International 95, 333–341, 2016.
[15] M. Conte and A. Igartua, Study of PTFE composites tribological behavior, Wear 296 (1-2), 568–574, 2012.
[16] F. Zhao, G. Li, W. Österle, I. Häusler, G. Zhang, T. Wang and Q. Wang, Tribological investigations of glass fiber reinforced epoxy composites under oil lubrication conditions, Tribology International 103, 208–217, 2016.
[17] D. H. Cho and B. Bhushan, Friction and wear of various polymer pairs used for label and wiper in labelling machine, Tribology International 98, 10-19, 2016.
[18] S. Agrawal, K. K. Singh and P. K. Sarkar, A comparative study of wear and friction characteristics of glass fibre reinforced epoxy resin, sliding under dry, oil-lubricated and inert gas environments, Tribology International 96, 217-224, 2016.
[19] H. Unal, A. Mimaroglu, U. Kadıoglu and H. Ekiz, Sliding friction and wear behaviour of polytetrafluoroethylene and its composites under dry conditions, Materials and Design 25, 239–245, 2004.
[20] M. Sumer, H. Unal and A. Mimaroglu, Evaluation of tribological behaviour of PEEK and glass fibre reinforced PEEK composite under dry sliding and water lubricated conditions, Wear 265, 1061–1065, 2008.
[21] B. Suresha, G. Chandramohan, Siddaramaiah, P. Samapthkumaran and S. Seetharamu, Three-body abrasive wear behaviour of carbon and glass fiber reinforced epoxy composites, Materials Sciences and Engineering 443, 285–291, 2007.
[22] B. Chen, J. Wang, and F. Yan, Tribology International Comparative investigation on the tribological behaviors of CF/PEEK composites under sea water lubrication, Tribiology International 52, 170–177, 2012.
[23] T. Tevruz, Tribological behaviours of carbon filled polytetrafluoroethylene (PTFE) dry journal bearings, Wear, 221 (1), 61–68, 1998.
[24] A. Arun ve K. K. Singh, Friction and wear behaviour of glass fibre reinforced polymer composite (GFRP) under dry and oil lubricated environmental conditions, Materials Today: Proceeding 4, 7285–7292, 2017.
[25] S. S. Kim, M. W. Shin, and H. Jang, Tribological properties of short glass fiber reinforced polyamide 12 sliding on medium carbon steel, Wear 274–275, 34–42, 2012.