The Effect of Process Parameters on Microstructure and Porosity of Layered NiAl(Co/Cr) Alloy Produced by SHS Method

Yıl 2020, Cilt: 23 Sayı: 1, 161 - 169, 01.03.2020

İbrahim Biliz , Adem Bakkaloğlu , Musa Kılıç

https://doi.org/10.2339/politeknik.557592

Cited By: 1

Öz

This paper deals with the investigation of microstructure and porosity of layered compounds of NiAl(Co/Cr) powders by SHS method. Layers of 50% Ni-50% Al powders were mixed with 3%, 6% and 10% of Co and Cr powders. These were mixed for 12 hours in a rotational container with a speed of 300 rpm. Mixed powders were cold compressed in a mould with pressures of 50, 100 and 200 MPa. The obtained samples were then synthesized in an argon controlled atmosphere with and without preheating to 250 oC. The microstructure of synthesized samples was analysed using SEM-BSE, EDS and XRD. The EDS results showed that the samples were containing Ni in majority along with Al, Co, and Cr. To determine the phase components, XRD spectra was analysed and the peaks of NiAl, Ni3Al, and NiAl3 were confirmed with NiAl having the highest peak intensity. The density calculations showed that the ratio of pores was affected the most from pressure. The main reason for this was attributed to the better contact of the powders under higher pressure which helped an uninterrupted reaction. The highest pore ratio values were obtained from samples produced under 50 MPa pressure.

Anahtar Kelimeler

NiAl, NiAlCoCr, nickel aluminide, SHS, porosity

The Effect of Process Parameters on Microstructure and Porosity of Layered NiAl(Co/Cr) Alloy Produced by SHS Method

Öz

This paper deals with the investigation of microstructure and porosity
of layered compounds of NiAl(Co/Cr) powders by SHS method. Layers of 50% Ni-50%
Al powders were mixed with 3%, 6% and 10% of Co and Cr powders. These were
mixed for 12 hours in a rotational container with a speed of 300 rpm. Mixed
powders were cold compressed in a mould with pressures of 50, 100 and 200 MPa.
The obtained samples were then synthesized in an argon controlled atmosphere
with and without preheating to 250 ^oC. The microstructure of
synthesized samples was analysed using SEM-BSE, EDS and XRD. The EDS results
showed that the samples were containing Ni in majority along with Al, Co, and
Cr. To determine the phase components, XRD spectra was analysed and the peaks
of NiAl, Ni₃Al, and NiAl₃ were confirmed with NiAl having
the highest peak intensity. The density calculations showed that the ratio of
pores was affected the most from pressure. The main reason for this was
attributed to the better contact of the powders under higher pressure which
helped an uninterrupted reaction. The highest pore ratio values were obtained
from samples produced under 50 MPa pressure.

Anahtar Kelimeler

NiAl, NiAlCoCr, nickel aluminide, SHS, porosity

Kaynakça

• Li, Y.,Liu, Y., Geng, H., Nie, D., Synthesis and cladding of Ni3Al intermetallic on steel substrate by laser controlled reactive synthesis, Journal of Materials Processing Technology 171 (2006) 405–410.
• Y. Wang, W. Chen, Microstructures, properties and high-temperature carburization resistances of HVOF thermal sprayed NiAl intermetallic-based alloy coatings, Surface and Coatings Technology 183 (2004) 18–28
• Michael Brammer,T.,Improving the phase stability and oxidation resistance of β-NiAl, Master of science, Iowa StateUniversity, Ames, Iowa, 2011.
• K. Morsi, Review: reaction synthesis processing of Ni–Al intermetallic materials, Materials Science and Engineering A299 (2001) 1–15.
• Dey G. K., Physical metallurgy of nickel aluminides, Sadhana Vol. 28, Parts 1 & 2, 247–262, Printed in India, April 2003
• La, P.,Bai, M., Xue, Q., Liu, W., A study of Ni3Al coating on carbon steel surface via the SHS castin groute, Surface and Coatings Technology 113 (1999) 44–51.
• KILIÇ, M., The investigation of microstructures and fabrication of functionally graded intermetallic materials by self-propagating high-temperature synthesis, Batman University Journal of Life Sciences; Volume 5 Number 2 (2015).
• Ulu R.,” Effect of Alloying elements on the microstructure and mechanical properties of NIAl alloys”, M.Sc. Thesis, Karabük University Graduate School of Natural and Applied Sciences, Karabük 2013
• Yong Cao, Peixian Zhu, Jingchuan Zhu, Yong Liu,” First-principles study of NiAl alloyed with Co”, Computational Materials Science 111 (2016) 34–40
• M.Kiyotakai, Khan T. İ., Ohmi T., Kudoh M, “Reactive casting of B2 Ni-Al-Co ternary intermetallic alloys”, Materials Transactions, Vol. 42, No 2 (2001) pp263 to 268
• Cotton J.D., “The influence of chromium on structure and mechanical properties of B2 Nickel aluminide alloys”, PhD Thesis ,University of Florida,1991
• Lin Chen, Yafang Han, “The microstructure and compressive properties in NiAl(Co) alloys by HPXD technique”, Materials Science and Engineering A329–331 (2002) 725–728
• Tosun G., Özler L., Kaya M., Orhan N.,” Investigation of porosity of NiTi alloys produced by shs method”, 5th International Powder Metallurgy Confrence, Ankara,2008
• Kaya, M., Investigation of metallurgical and mechanical characteristics of NiTi shape memory alloys produced by powder metallurgy, PhD Thesis, Firat University Graduate School of Natural and Applied Sciences, Elazığ, 2008.
• Kovalev A.I., Barskayab R.A., Wainstein D.L., “Effect of alloying on electronic structure, strength and ductility characteristics of nickel aluminide”, Surface Science 532–535 (2003) 35–40
• Dong H.X., Jiang Y., He Y.H.,∗, Zou J.,∗∗, Xu N.P., Huang B.Y., Liu C.T., Liaw P.K. ,” Oxidation behavior of porous NiAl prepared through reactive synthesis”, Materials Chemistry and Physics 122 (2010) 417–423
• Dong, H.X.,Jiang, Y., He, Y.H., Song, M., Zou, J., Xu, N.P., Huang, B.Y., Liu, C.T., Liaw, P.K., Formation of porous Ni–Al intermetallics through pressureless reaction synthesis, ScienceDirect, Journal of AlloysandCompounds 484 (2009) 907–913.