Effect of SiC Particle Size on the Microstructural, Mechanical and Oxidation Properties of In-situ Synthesized HfB2-SiC Composites

Yıl 2021, Cilt: 24 Sayı: 2, 503 - 510, 01.06.2021

Kübra Gürcan , Bora Derin , Erhan Ayas

https://doi.org/10.2339/politeknik.682256

Cited By: 1

Öz

In-situ synthesis and densification of hafnium diboride - silicon carbide (HfB2-SiC) ceramic composites were studied by the spark plasma sintering (SPS) method using HfO2, B, and SiC as starting powders. Influence of SiC particle size (∼2 µm and ∼10 µm) on mechanical properties and oxidation resistance of in-situ composites were extensively investigated. According to the achieved results, the highest densification (∼95 % TD) was obtained with fine SiC particle reinforcement. The measured Vickers hardness and fracture toughness of the composites containing fine SiC were 14.3 GPa and 5.42 MPa.m1/2, respectively. The fracture mode changed from transgranular cleavage to a mixed-mode, and the crack deflection was believed to be the primary toughening mechanism. From oxidation test result, the composite with fine SiC particles exhibited more inhomogeneous oxide scales compared to that of coarse SiC containing composite. 

Anahtar Kelimeler

Ultra high temperature ceramics, HfB2-SiC, in-situ synthesis, SPS

Destekleyen Kurum

Anadolu Üniversitesi-Eskişehir Teknik Üniversitesi

Proje Numarası

1505F506

Kaynakça

• [1] R Levine S., Opila E., Halbig M., D Kiser J., Singh M., Salem A.”Evaluation of Ultra-High Temperature Ceramics for Aero Propulsion Use”, Journal of the European Ceramic Society, 22: 2757-2767, (2002)
• [2] Fahrenholtz W.G., Hilmas G.E., Talmy I.G., Zaykoski J.A.”Refractory Diborides of Zirconium and Hafnium”, Journal of the American Ceramic Society, 90: 1347-1364, (2007)
• [3] Akin I., Goller G., “Spark Plasma Sintering of Zirconia-Toughened Alumina Composites and Ultra-High Temperature Ceramics Reinforced with Carbon Nanotubes”, Research and Innovation in Carbon Nanotube-Based Composites, 2015.
• [4] Ni D.-W., Zhang G.-J., Kan Y.-M., Wang P.-L.”Synthesis of Monodispersed Fine Hafnium Diboride Powders Using Carbo/Borothermal Reduction of Hafnium Dioxide”, Journal of the American Ceramic Society, 91: 2709-2712, (2008)
• [5] Wang H., Lee S.H., Kim H.D., Oh H.C.”Synthesis of Ultrafine Hafnium Diboride Powders Using Solution-Based Processing and Spark Plasma Sintering”, International Journal of Applied Ceramic Technology, 11: (2014)
• [6] Brochu M., Gauntt B., Zimmerly T., Ayala A., Loehman R.”Fabrication of UHTCs by Conversion of Dynamically Consolidated Zr+B and Hf+B Powder Mixtures”, Journal of the American Ceramic Society, 91: 2815-2822, (2008)
• [7] Ni D.-W., Zhang G.-J., Kan Y.-M., Wang P.-L.”Hot Pressed HfB2 and HfB2–20vol%SiC Ceramics Based on HfB2 Powder Synthesized by Borothermal Reduction of HfO2*”, International Journal of Applied Ceramic Technology, 7: 830-836, (2010)
• [8] Blum Y.D., Marschall J., Hui D., Adair B., Vestel M.”Hafnium Reactivity with Boron and Carbon Sources Under Non-Self-Propagating High-Temperature Synthesis Conditions”, Journal of the American Ceramic Society, 91: 1481-1488, (2008)
• [9] Zou J., Zhang G.-J., Kan Y.-M., Ohji T.”Pressureless sintering mechanisms and mechanical properties of hafnium diboride ceramics with pre-sintering heat treatment”, Scripta Materialia, 62: 159-162, (2010)
• [10] Parthasarathy T.A., Rapp R.A., Opeka M., Kerans R.J.”A model for the oxidation of ZrB2, HfB2 and TiB2”, Acta Materialia, 55: 5999-6010, (2007)
• [11] Monteverde F., Bellosi A.”The resistance to oxidation of an HfB2–SiC composite”, Journal of the European Ceramic Society, 25: 1025-1031, (2005)
• [12] Monteverde F.”Ultra-high temperature HfB2–SiC ceramics consolidated by hot-pressing and spark plasma sintering”, Journal of Alloys and Compounds, 428: 197-205, (2007)
• [13] Fahrenholtz W.G.”Thermodynamic Analysis of ZrB2–SiC Oxidation: Formation of a SiC-Depleted Region”, Journal of the American Ceramic Society, 90: 143-148, (2007)
• [14] Monteverde F., Scatteia L.”Resistance to Thermal Shock and to Oxidation of Metal Diborides–SiC Ceramics for Aerospace Application”, Journal of the American Ceramic Society, 90: 1130-1138, (2007)
• [15] Mallik M., Ray K.K., Mitra R.”Oxidation behavior of hot pressed ZrB2–SiC and HfB2–SiC composites”, Journal of the European Ceramic Society, 31: 199-215, (2011)
• [16] Carney C.M., Key T.S.”Comparison of the Oxidation Protection of HfB2 Based Ultra‐High Temperature Ceramics by the Addition of SiC or MoSi2”, Ceramic Engineering and Science Proceedings, 35: 261-273, (2014)
• [17] Monteverde F., Melandri C., Guicciardi S.”Microstructure and mechanical properties of an HfB2+30vol.% SiC composite consolidated by spark plasma sintering”, Materials Chemistry and Physics, 100: 513-519, (2006)
• [18] Quach D.V., Groza J.R., Zavaliangos A., Anselmi-Tamburini U., “10 - Fundamentals and applications of field/current assisted sintering”, Sintering of Advanced Materials, Woodhead Publishing, 2010.
• [19] Anselmi-Tamburini U., Kodera Y., Gasch M., Unuvar C., Munir Z.A., Ohyanagi M., Johnson S.M.”Synthesis and characterization of dense ultra-high temperature thermal protection materials produced by field activation through spark plasma sintering (SPS): I. Hafnium Diboride”, Journal of Materials Science, 41: 3097-3104, (2006)
• [20] Wang H., Lee S.H., Kim H.D., Chamberlain A.”Nano‐Hafnium Diboride Powders Synthesized Using a Spark Plasma Sintering Apparatus”, Journal of the American Ceramic Society, 95: (2012)
• [21] Yuan H., Li J., Shen Q., Zhang L.”In situ synthesis and sintering of ZrB2 porous ceramics by the spark plasma sintering–reactive synthesis (SPS–RS) method”, International Journal of Refractory Metals and Hard Materials, 34: 3-7, (2012)
• [22] Wang H., Lee S.-H., Feng L.”HfB2–SiC composite prepared by reactive spark plasma sintering”, Ceramics International, 40: 11009-11013, (2014)
• [23] Wu W.-W., Estili M., Nishimura T., Zhang G.-J., Sakka Y.”Machinable ZrB2–SiC–BN composites fabricated by reactive spark plasma sintering”, Materials Science and Engineering: A, 582: 41-46, (2013)
• [24] Xiang M., Gu J., Ji W., Xie J., Wang W., Xiong Y., Fu Z.”Reactive spark plasma sintering and mechanical properties of ZrB2-SiC-ZrC composites from ZrC-B4C-Si system”, Ceramics International, 44: 8417-8422, (2018)
• [25] Shahedi Asl M., Nayebi B., Ahmadi Z., Parvizi S., Shokouhimehr M.”A novel ZrB2–VB2–ZrC composite fabricated by reactive spark plasma sintering”, Materials Science and Engineering: A, 731: 131-139, (2018)
• [26] Monteverde F.”Progress in the fabrication of ultra-high-temperature ceramics: “in situ” synthesis, microstructure and properties of a reactive hot-pressed HfB2–SiC composite”, Composites Science and Technology, 65: 1869-1879, (2005)
• [27] Jun Lee S., Son Kang E.U.L., Su Baek S., Kim D.K.”Reactive Hot Pressing and Oxidation Behavior of Hf-Based Ultra-High-Temperature Ceramics”, Surface Review and Letters (SRL), 17: 215-221, (2010)
• [28] Bale C.W., Bélisle E., Chartrand P., Decterov S.A., Eriksson G., Gheribi A.E., Hack K., Jung I.H., Kang Y.B., Melançon J., Pelton A.D., Petersen S., Robelin C., Sangster J., Spencer P., Van Ende M.A.”FactSage thermochemical software and databases, 2010–2016”, Calphad, 54: 35-53, (2016)
• [29] Evans A.G., Charles E.A.”Fracture Toughness Determinations by Indentation”, Journal of the American Ceramic Society, 59: 371-372, (1976)
• [30] Telle R., Sigl L.S., Takagi K., “Boride-Based Hard Materials”, Handbook of Ceramic Hard Materials, 2000.
• [31] Telle R., Sigl, L. S. and Takagi, K., “Boride-Based Hard Materials”, Handbook of Ceramic Hard Materials, 2008.
• [32] Sokolov P.S., Mukhanov V.A., Chauveau T., Solozhenko V.L.”On melting of silicon carbide under pressure”, Journal of Superhard Materials, 34: 339-341, (2012)
• [33] Davis S.G., Anthrop D.F., Searcy A.W.”Vapor Pressure of Silicon and the Dissociation Pressure of Silicon Carbide”, The Journal of Chemical Physics, 34: 659-664, (1961)
• [34] Yudin B.F., Borisov V.G.”Thermodynamic analysis of dissociative volatilization of silicon carbide”, Refractories, 8: 499-504, (1967)
• [35] Takeuchi T., Takahashi M., Ado K., Tamari N., Ichikawa K., Miyamoto S., Kawahara M., Tabuchi M., Kageyama H.”Rapid Preparation of Lead Titanate Sputtering Target Using Spark‐Plasma Sintering”, Journal of the American Ceramic Society, 84: 2521-2525, (2004)
• [36] Munir Z.A., Anselmi-Tamburini U., Ohyanagi M.”The effect of electric field and pressure on the synthesis and consolidation of materials: A review of the spark plasma sintering method”, Journal of Materials Science, 41: 763-777, (2006)
• [37] Özerdem E., Ayas E.”Fabrication and microstructural stability of spark plasma sintered Al2O3/Er3Al5O12 eutectic”, Ceramics International, 41: 12869-12877, (2015)
• [38] Gürcan K., Ayas E.”In-situ synthesis and densification of HfB2 ceramics by the spark plasma sintering technique”, Ceramics International, 43: 3547-3555, (2017)
• [39] Zhu S., Fahrenholtz W.G., Hilmas G.E.”Influence of silicon carbide particle size on the microstructure and mechanical properties of zirconium diboride–silicon carbide ceramics”, Journal of the European Ceramic Society, 27: 2077-2083, (2007)
• [40] Zapata-Solvas E., Jayaseelan D.D., Lin H.T., Brown P., Lee W.E.”Mechanical properties of ZrB2- and HfB2-based ultra-high temperature ceramics fabricated by spark plasma sintering”, Journal of the European Ceramic Society, 33: 1373-1386, (2013).
• [41] Swanson P.L., Fairbanks C.J., Lawn B.R., Mai Y.-W., Hockey B.J.”Crack-Interface Grain Bridging as a Fracture Resistance I, Mechanism in Ceramics: I, Experimental Study on Alumina”, Journal of the American Ceramic Society, 70: 279-289, (1987)
• [42] Quanli J., Haijun Z., Suping L., Xiaolin J.”Effect of particle size on oxidation of silicon carbide powders”, Ceramics International, 33: 309-313, (2007)
• [43] Hu P., Guolin W., Wang Z.”Oxidation mechanism and resistance of ZrB2–SiC composites”, Corrosion Science, 51: 2724-2732, (2009)
• [44] Monteverde F.”Beneficial effects of an ultra-fine α-SiC incorporation on the sinterability and mechanical properties of ZrB2”, Applied Physics A, 82: 329-337, (2006)