Analytical Investigation of Continuous Contact Problem Between Orthotropic Layer and Isotropic Half-Plane

Yıl 2023, , 154 - 171, 31.12.2023

Erdal Öner , Mine Gül Oktay

https://doi.org/10.53501/rteufemud.1358045

Öz

Computational contact mechanics is of great importance in mechanical and civil engineering fields, as well as in environmental and medical applications. This branch of mechanics seeks numerical solutions to contact area, pressure, deformation, and stresses in response to the interaction of two bodies. The subject of contact mechanics has contributed significantly to the development of new and interesting fields in mechanics and applied mathematical sciences in recent years. In this study, the problem of continuous contact of the orthotropic layer resting on the isotropic half-plane is analyzed by analytical method. Only the mass force of the orthotropic layer is taken into account in the solution. The orthotropic layer was loaded by a punch with a rigid flat profile. All surfaces are assumed to be frictionless. The theory of elasticity and integral transformation techniques are used to obtain the displacement and stress expressions for the orthotropic layer and the isotropic half-plane. As a result of the study, depending on various dimensionless parameters and orthotropic material types, the contact stress under the punch, the critical separation load causing the initial separation between the orthotropic layer and the isotropic half-plane, and the critical separation distance were obtained as dimensionless

Anahtar Kelimeler

Orthotropic layer, Contact stress, Integral equation, Critical separation load, Critical separation distance

Ortotrop Tabaka ile İzotrop Yarım Düzlem Arasındaki Sürekli Temas Probleminin Analitik Olarak İncelenmesi

Öz

Hesaplamalı temas mekaniği, makine ve inşaat mühendisliği gibi alanların yanı sıra çevre ve tıbbi uygulamalarda da büyük önem taşımaktadır. Mekaniğin bu dalı, iki cismin etkileşimine yanıt olarak temas alanı, basınç, deformasyon ve gerilmelere sayısal çözümler arar. Temas mekaniği konusu, son yıllarda mekanik ve uygulamalı matematik bilimlerinde yeni ve ilginç alanların gelişmesine önemli derecede katkı sağlamıştır. Bu çalışmada izotrop yarım düzlem üzerine oturan ortotrop tabakanın sürekli temasına ilişkin problem analitik yöntemle incelenmiştir. Çözümde sadece ortotrop tabakanın kütle kuvveti hesaba katılmıştır. Ortotrop tabaka rijit düz profile sahip bir panç vasıtasıyla yüklenmiştir. Tüm yüzeylerin sürtünmesiz olduğu varsayılmıştır. Ortotrop tabaka ve izotrop yarım düzlem için yer değiştirme ve gerilme ifadelerinin elde edilmesinde elastisite teorisi ve integral dönüşüm tekniklerinden yararlanılmıştır. Çalışma sonucunda çeşitli boyutsuz parametrelere ve ortotrop malzeme türlerine bağlı olarak panç altındaki temas gerilmesi, ortotrop tabaka ile izotrop yarım düzlem arasında ilk ayrılmaya neden olan kritik ayrılma yükü ve kritik ayrılma uzaklığı boyutsuz olarak elde edilmiştir.

Anahtar Kelimeler

Ortotrop tabaka, Temas gerilmesi, İntegral denklem, Kritik ayrılma yükü, Kritik ayrılma uzaklığı

Kaynakça

• Adiyaman, G., Birinci, A., Oner, E., Yaylaci, M. (2016). A receding contact problem between a functionally graded layer and two homogeneous quarter planes. Acta Mechanica, 227(6), 1753-1766. https://doi.org/10.1007/s00707-016-1580-y Adiyaman, G., Oner, E., Birinci, A. (2017). Continuous and discontinuous contact problem of a functionally graded layer resting on a rigid foundation. Acta Mechanica, 228(9), 3003-3017. https://doi.org/10.1007/s00707-017-1871-y
• Adiyaman, G., Oner, E., Yaylaci, M., Birinci, A. (2023). A study on the contact problem of a layer consisting of functionally graded material (FGM) in the presence of body force. Journal of Mechanics of Materials and Structures, 18(1), 125-141. https://doi.org/10.2140/jomms.2023.18.125
• Attia, M. A., El-Shafei, A. G. (2020). Investigation of multibody receding frictional indentation problems of unbonded elastic functionally graded layers. International Journal of Mechanical Sciences, 184, 105838. https://doi.org/10.1016/j.ijmecsci.2020.105838
• Batra, R. C., Jiang, W. (2008). Analytical solution of the contact problem of a rigid indenter and an anisotropic linear elastic layer. International Journal of Solids and Structures, 45(22-23), 5814-5830. https://doi.org/10.1016/j.ijsolstr.2008.06.016
• Binienda, W. K., Pindera, M. (1994). Frictionless contact of layered metal-matrix and polymer-matrix composite half planes. Composites Science and Technology, 50(1), 119-128. https://doi.org/10.1016/0266-3538(94)90131-7
• Birinci, A. (1994). Elastik Mesnete Oturan Çift Şerit Problemi, Yüksek Lisans Tezi, Karadeniz Teknik Üniversitesi, Türkiye.
• Birinci, A. (1998). Alt Tabakasında Düşey Bir Çatlağı Bulunan ve Rijit Bir Blok Aracılığı ile Yüklenen Bileşik Tabaka Problemi, Doktora Tezi, Karadeniz Teknik Üniversitesi, Türkiye.
• Birinci, A., Adiyaman, G., Yaylaci, M., Oner, E. (2015). Analysis of continuous and discontinuous cases of a contact problem using analytical method and FEM. Latin American Journal of Solids and Structures, 12(9), 1771-1789. https://doi.org/10.1590/1679-78251574
• Birinci, A., Erdol, R. (2003). A frictionless contact problem for two elastic layers supported by a winkler foundation. Structural Engineering and Mechanics, 15(3), 331-344.
• Civelek, M. B., Erdoğan, F. (1975). The frictionless contact problem for an elastic layer under gravity. ASME Journal of Applied Mechanics, 42(1), 136-140. https://doi.org/10.1115/1.3423504
• Civelek, M. B., Erdoğan, F. (1976). Interface separation in a frictionless contact problem for an elastic layer. Journal of Applied Mechanics, 43, 175-177. https://doi.org/10.1115/1.3423775
• Civelek, M. B., Erdoğan, F., Cakiroglu, A. O. (1978). Interface separation for an elastic layer loaded by a rigid stamp. International Journal of Engineering Science, 16(9), 669–679. https://doi.org/10.1016/0020-7225(78)90044-7
• Comez, I. (2021). Frictional moving contact problem between a conducting rigid cylindrical punch and a functionally graded piezoelectric layered half plane. Meccanica, 56, 3039-3058. https://doi.org/10.1007/s11012-021-01407-2
• Comez, İ. (2022). Frictional moving contact problem between a functionally graded monoclinic layer and a rigid punch of an arbitrary profile. Acta Mechanica, 233(4), 1435-1453. https://doi.org/10.1007/s00707-022-03178-7
• Comez, I., Guler, M. A. (2020). On the contact problem of a moving rigid cylindrical punch sliding over an orthotropic layer bonded to an ısotropic half plane. Mathematics and Mechanics of Solids, 25(10), 1924-1942. https://doi.org/10.1177/1081286520915272
• Çakıroğlu, A. O. (1979). Elastik Yarım Düzleme Oturan Plaklarda Temas Problemi, Doçentlik Tezi Karadeniz Teknik Üniversitesi, Türkiye.
• Çakıroğlu, E. (2011). İki Elastik Çeyrek Düzleme Oturan ve Rijit Bir Panç ile Bastırılan Elastik Tabaka Probleminin Çözümü ve Yapay Sinir Ağı Uygulaması, Doktora Tezi, Karadeniz Teknik Üniversitesi, Türkiye.
• Dempsey, J. P., Zhao, Z. G., Minnetyan, L., Li, H. (1990). plane contact of an elastic layer supported by a winkler foundation. Journal of Applied Mechanics, 57(4), 974-980. https://doi.org/10.1115/1.2897670
• El-Borgi, S., Abdelmoul, R., Keer, L. (2006). A receding contact plane problem between a functionally graded layer and a homogeneous substrate. International Journal of Solids and Structures, 43(3-4), 658-674. https://doi.org/10.1016/j.ijsolstr.2005.04.017
• Erdoğan, F., Gupta G. D. (1972). On the numerical solution of singular ıntegral equations. Quarterly of Applied Mathematics, 29, 525-534. https://doi.org/10.1090/qam/408277
• Gecit, M. R. (1980). A tensionless contact without friction between an elastic layer and an elastic foundation. International Journal of Solids and Structures, 16(5), 387-396. https://doi.org/10.1016/0020-7683(80)90037-2
• Gecit, M. R. (1981). Axisymmetric contact problem for an elastic layer and an elastic fondation. International Journal of Solids and Structures, 19(6), 747-755. https://doi.org/10.1016/0020-7225(81)90108-7
• Gladwell, G. M. L. (1976). On some unbonded contact problems in plane elasticity theory. Journal of Applied Mechanics, 43(2), 263-267. https://doi.org/10.1115/1.3423821
• Guler, M. A. (2014). Closed-form solution of the two-dimensional sliding frictional contact problem for an orthotropic medium. International Journal of Mechanical Sciences, 87, 72-88. https://doi.org/10.1016/j.ijmecsci.2014.05.033
• Guler, M. A., Erdogan, F. (2004). Contact mechanics of graded coatings. International Journal of Solids and Structures, 41(14), 3865-3889. https://doi.org/10.1016/j.ijsolstr.2004.02.025
• Kahya, V. (1997). Üst Tarafından Rijit Olarak Tutulmuş Elastik Bir Tabaka ile Rijit Bir Blok Arasındaki Sürtünmesiz Değme Problemi, Yüksek Lisans Tezi, Karadeniz Teknik Üniversitesi, Türkiye.
• Kahya, V. (2003). İki Tabakalı Elastik Ortamda Sürekli ve Süreksiz Değme Problemlerinin İncelenmesi, Doktora Tezi, Karadeniz Teknik Üniversitesi, Türkiye.
• Karabulut, P. M., Çömez, İ. (2023). Continuous and discontinuous contact problem of a functionally graded orthotropic layer ındented by a rigid cylindrical punch: Analytical and finite element approaches. ZAMM‐Journal of Applied Mathematics and Mechanics/Zeitschrift für Angewandte Mathematik und Mechanik, e202200427. https://doi.org/10.1002/zamm.202200427
• Ke, L., Wang, Y. (2007). Two-dimensional sliding frictional contact of functionally graded materials. European Journal of Mechanics - A/Solids, 26(1), 171-188. https://doi.org/10.1016/j.euromechsol.2006.05.007
• Kochetkov, I. D., Rogacheva, N. N. (2005). Contact ınteraction of a piezoelectric actuator and elastic half-space. Journal of Applied Mathematics and Mechanics, 69(5), 792-804. https://doi.org/10.1016/j.japmathmech.2005.09.014
• Kucuksucu, A., Guler, M. A., Avci, A. (2015). Mechanics of sliding frictional contact for a graded orthotropic half-plane. Acta Mechanica, 226, 3333-3374. https://doi.org/10.1007/s00707-015-1374-7
• Li, X., Wang, M. (2006). Hertzian contact of anisotropic piezoelectric bodies. Journal of Elasticity, 84, 153-166. https://doi.org/10.1007/s10659-006-9061-5
• Oktay, M.G. (2023). İzotrop Yarım Düzleme Oturan Ortotrop Tabakanın Sürekli Temas Problemi, Yüksek Lisans Tezi, Bayburt Üniversitesi, Türkiye.
• Oner, E. (2021a). Computational contact mechanics for a medium consisting of functionally graded material coating and orthotropic substrate. Journal of Structural Engineering & Applied Mechanics, 4(4), 249-266. https://doi.org/10.31462/jseam.2021.04249266
• Oner, E. (2021b). Two-dimensional frictionless contact analysis of an orthotropic layer under gravity. Journal of Mechanics of Materials and Structures, 16(4), 573-594. https://doi.org/10.2140/jomms.2021.16.573
• Oner, E. (2021c). Frictionless contact mechanics of an orthotropic coating/ısotropic substrate system. Computers and Concrete, 28(2), 209-220. https://doi.org/10.12989/cac.2021.28.2.209
• Oner, E., Adiyaman, G., Birinci, A. (2017). Continuous contact problem of a functionally graded layer resting on an elastic half-plane. Archives of Mechanics, 69(1), 53-73.
• Oner, E., Birinci, A. (2014). Continuous contact problem for two elastic layers resting on an elastic half infinite plane. Journal of Mechanics of Materials and Structures, 9(1), 105-119. https://dx.doi.org/10.2140/jomms.2014.9.105
• Oner, E., Birinci, A. (2020). Investigation of the solution for discontinuous contact problem between a functionally graded (fg) layer and homogeneous half-space. Archive of Applied Mechanics, 90(12), 2799-2819. https://doi.org/10.1007/s00419-020-01750-y
• Oner, E., Sengul Sabano, B., Uzun Yaylaci, E., Adiyaman, G., Yaylaci, M., Birinci, A. (2022). On the plane receding contact between two functionally graded layers using computational, finite element and artificial neural network methods. ZAMM-Zeitschrift fur Angewandte Mathematik und Mechanik, 102(2). https://doi.org/10.1002/zamm.202100287
• Oner, E., Yaylaci, M., Birinci, A. (2014). Solution of a receding contact problem using an analytical method and a finite element method. Journal of Mechanics of Materials and Structures, 9(3), 333-345. https://dx.doi.org/10.2140/jomms.2014.9.333
• Oner, E., Yaylaci, M., Birinci, A. (2015). Analytical solution of a contact problem and comparison with the results from fem. Structural Engineering and Mechanics, 54(4), 607-622. https://doi.org/10.12989/sem.2015.54.4.607
• Özşahin, T.Ş. (2000). Rijit İki Düz Blok Üzerine Oturan Bileşik Tabakada Sürekli ve Süreksiz Temas Problemi, Doktora Tezi, Karadeniz Teknik Üniversitesi, Türkiye.
• Shibuya, T., Koizumi, T., Nakahara, I. (1974). An elastic contact problem for a half-space ındented by a flat annular rigid stamp. International Journal of Engineering Science, 12(9), 759-771. https://doi.org/10.1016/0020-7225(74)90056-1
• Singh, B. M., Rokne, J., Dhaliwal, R. S. (2007). The study of dynamic behavior of functionally graded piezoelectric materials and an application to a contact problem. Quarterly of Applied Mathematics, 65(1), 155-162. https://doi.org/10.1090/S0033-569X-07-01029-0
• Sui, Y., Wang, W., Zhang, H., Liang, H. (2023). 3D frictional contact of graded magneto-electro- elastic film-substrate system under electromagnetic fields. International Journal of Solids and Structures, 269, 112217. https://doi.org/10.1016/j.ijsolstr.2023.112217
• Toktas, S. E., Dag, S. (2022). Multi-layer model for moving contact problems of functionally graded coatings with general variations in physical properties. Proceedings of The Institution of Mechanical Engineers Part L-Journal of Materials-Design and Applications, 236(10), 1967-1980. https://doi.org/10.1177/14644207221092119
• Uzun Yaylaci, E., Oner, E., Yaylaci, M., Ozdemir, M. E., Abushattal, A., Birinci, A, (2022). Application of artificial neural networks in the analysis of the continuous contact problem. Structural Engineering and Mechanics, 84(1), 35-48. https://doi.org/10.12989/sem.2022.84.1.035
• Wang, C., Yan, J., Cao, R. (2023). On the receding contact plane problem for bi-fgm-layers indented by a flat ındenter. Structural Engineering and Mechanics, 85(5), 621-633. https://doi.org/10.12989/sem.2023.85.5.621
• Woźniak, M., Hummel, A., Pauk, V. J. (2002). Axisymmetric contact problems for an elastic layer resting on a rigid base with a winkler type excavitation. International Journal of Solids and Structures, 39(15), 4117-4131. https://doi.org/10.1016/S0020-7683(02)00229-9
• Yaylaci, M., Adiyaman, G., Oner, E., Birinci, A. (2020). Examination of analytical and finite element solutions regarding contact of a functionally graded layer. Structural Engineering and Mechanics, 76(3), 325-336. https://doi.org/10.12989/sem.2020.76.3.325
• Yaylaci, M., Adiyaman, G., Oner, E., Birinci, A. (2021a). Investigation of continuous and discontinuous contact cases in the contact mechanics of graded materials using analytical method and fem. Computers and Concrete, 27(3), 199-210. https://doi.org/10.12989/cac.2021.27.3.199
• Yaylaci, M., Eyuboglu, A., Adiyaman, G., Uzun Yaylaci, E., Oner, E., Birinci, A. (2021b). Assessment of different solution methods for receding contact problems in functionally graded layered mediums. Mechanics of Materials, 154. https://doi.org/10.1016/j.mechmat.2020.103730
• Yaylaci, M., Oner, E., Birinci, A. (2014). Comparison between analytical and ansys calculations for a receding contact problem. Journal of Engineering Mechanics, 140(9), 4014070. https://doi.org/10.1061/(ASCE)EM.1943-7889.000078
• Yilmaz, K. B., Comez, I., Guler, M. A., Yildirim, B. (2019). The effect of orthotropic material gradation on the plane sliding frictional contact mechanics problem. The Journal of Strain Analysis for Engineering Design, 54(4), 254-275. https://doi.org/10.1177/0309324719859110
• Zharii, O. Y. (1995). Adhesive contact between the surface wave and a rigid strip. Journal of Applied Mechanics, 62(2), 368-372. https://doi.org/10.1115/1.2895940