EKDZ modelinin farklı bina dağılımları içeren senaryolara uygulanarak eğim kırınımı etkisinin araştırılması

Yıl 2016, Cilt: 20 Sayı: 1, 39 - 45, 01.04.2016

Mehmet Tabakcıoğlu , Muhammed Çorapsız

https://doi.org/10.16984/saufenbilder.15995

Cited By: 1

Öz

Bu çalışmada, karasal radyo yayıncılığında kullanılan bazı yayılım modelleri kısaca anlatılacak, daha sonra EKDZ ve UKT yayılım modelleri kullanılarak benzetimler yapılacaktır. Bu benzetimler için kullanılacak senaryolar bazı istatistiksel ve geometrik dağılımlar kullanılarak belirlenecektir. Bu dağılımlar üzerinden yapılacak benzetimler sonucunda eğim kırınımı etkisi tartışılacaktır.

 

Anahtar Kelimeler

EKDZ modeli, eğim kırınımı, istatistiksel dağılımlar, radyo yayıncılığı, UKT modeli

Investigation of slope diffraction effect via application of S-UTD-CH model into scenarios including different building distribution

Öz

In this study, after giving brief information about some electromagnetic wave propagation model used in terrestrial radio broadcasting, simulations will be made by means of S-UTD-CH and UTD models. The scenarios used in simulations will be determined by some statistical and geometrical distributions. In conclusion, slope diffraction contribution will be discussed according to simulation results.

Anahtar Kelimeler

S-UTD-CH model, slope diffraction, statistical distributions, radio broadcasting, UTD model

Kaynakça

• M.B. Tabakcıoğlu and A. Cansız, “Çoklu kırınımlar içeren senaryolar için elektromanyetik dalga yayılım modelleri”, Uludağ University Journal of the Faculty of Engineering and Architecture , vol. 19, no. 1, pp. 37-46, 2014.
• C. Tzaras and S.R. Saunders, “An improved heuristic UTD solution for multiple-edge transition zone diffraction”, IEEE Trans. Antennas Prop., vol. 49, no. 12, pp. 1678–1682, 2001.
• R.G. Kouyoumjian and P.H. Pathak, “A uniform geometrical theory of diffraction for an edge in a perfectly conducting surface”, IEEE Proceedings, pp. 1448–1461, 1974.
• J.B. Andersen, “UTD multiple-edge transition zone diffraction”, IEEE Transactions on Antennas and Propagation, vol. 45, pp. 1093–1097, 1997.
• R.J. Luebbers, “A uniform double diffraction coefficient”, IEEE Trans. Antennas Prop., vol. 57, no. 1, pp. 1270-1273, 1989.
• M.B. Tabakcıoğlu and A. Kara, “Comparison of improved slope uniform theory of diffraction with some geometrical optic and physical optic methods for multiple building diffractions”, Electromagnetics, vol. 29, no. 1, pp. 303-320, 2009.
• M.B. Tabakcıoğlu and A. Kara, “Improvements on Slope Diffraction for Multiple Wedges”, Electromagnetics, vol. 30, no. 3, pp. 285-296, 2010.
• M.B. Tabakcıoğlu and A. Cansız, “Application of S-UTD-CH Model into Multiple Diffraction Scenarios”, International Journal of Antennas and Propagation, vol. 2013, pp. 1-5, 2013.
• K. Rizk, R. Valenzuela, D. Chizhik and F. Gardiol, “Application of the slope diffraction method for urban microwave propagation prediction”, IEEE Vehicular Technology Conference, vol. 2, pp. 1150-1155, 1998.
• O.M. Bucci, A. Capozzoli, C. Curcio and G. Delia, “The experimental validation of a technique to find the convex hull of the scattering systems from field data”, IEEE APS Procedings, pp. 539-542, 2003.
• C.A. Balanis, Advanced Engineering Electromagnetics. John Wiley & Sons, New York, USA, 1989, p. 981.
• P.Y. Ufimtsev, Fundamentals of the Physical Theory of Diffraction, John Wiley & Sons, New Jersey, USA, 2007, p. 329.
• C.A. Balanis, L. Sevgi and P.Y. Ufimtsev, “Fifty Years of High Frequency Diffraction”, International Journal of RF and Microwave Computer-Aided Engineering,2013.
• R.J. Luebbers, “Finite conductivity uniform GTD versus knife edge diffraction in prediction of propagation path loss”, IEEE Transactions on Antennas and Propagation, vol. 32, no. 1, pp, 70-76, 1984.
• J.B. Andersen, “Transition zone diffraction by multiple edges”, IEEE Proceedings Microwave Antennas and Propagation, vol. 141, no. 5, pp. 382-384, 1994.
• H.K. Chung and H.L. Bertoni, “Application of Isolated Diffraction Edge (IDE) Method for Urban Microwave Path Loss Prediction”, IEEE Vehicular Technology Conference, vol. 3, pp. 205-209, 2003.