Process Model Development of Lithium-ion Batteries — An Electrochemical Impedance Spectroscopy Simulation

Yıl 2020, Cilt: 24 Sayı: 6, 1191 - 1197, 01.12.2020

Salim Erol

https://doi.org/10.16984/saufenbilder.765554

Cited By: 7

Öz

In this study, a simulation of an electrochemical impedance spectroscopy for lithium-ion batteries was proposed. The electrochemical process was developed from battery electrode kinetics and mass transfer of mobile Li+ ions through negative and positive electrodes and electrolyte. The phenomena used in this process were represented by an equivalent electrical circuit. A mathematical model was designed using the equivalent circuit and its elements which are in fact battery parameters. The parameter values were presented as compared with real experimental impedance result. The results showed that the simulation and process development were in good agreement with the experimental data.

Anahtar Kelimeler

Li-ion battery, impedance spectroscopy, equivalent electrical circuit, porous electrode, solid electrolyte interphase

Kaynakça

• S. Buller, M. Thele, E. Karden, and R. W. De Doncker, "Impedance-based non-linear dynamic battery modeling for automotive applications," Journal of Power Sources, vol. 113, no. 2, pp. 422-430, 2003.
• H. Blanke et al., "Impedance measurements on lead–acid batteries for state-of-charge, state-of-health and cranking capability prognosis in electric and hybrid electric vehicles," Journal of power Sources, vol. 144, no. 2, pp. 418-425, 2005.
• W. Waag, S. Käbitz, and D. U. Sauer, "Experimental investigation of the lithium-ion battery impedance characteristic at various conditions and aging states and its influence on the application," Applied energy, vol. 102, pp. 885-897, 2013.
• W. Huang and J. A. A. Qahouq, "An online battery impedance measurement method using DC–DC power converter control," IEEE Transactions on Industrial Electronics, vol. 61, no. 11, pp. 5987-5995, 2014.
• J. Landesfeind, D. Pritzl, and H. A. Gasteiger, "An analysis protocol for three-electrode li-ion battery impedance spectra: Part i. analysis of a high-voltage positive electrode," Journal of The Electrochemical Society, vol. 164, no. 7, p. A1773, 2017.
• Z. He and F. Mansfeld, "Exploring the use of electrochemical impedance spectroscopy (EIS) in microbial fuel cell studies," Energy & Environmental Science, vol. 2, no. 2, pp. 215-219, 2009.
• J. T. Müller, P. M. Urban, and W. F. Hölderich, "Impedance studies on direct methanol fuel cell anodes," Journal of Power Sources, vol. 84, no. 2, pp. 157-160, 1999.
• N. Fouquet, C. Doulet, C. Nouillant, G. Dauphin-Tanguy, and B. Ould-Bouamama, "Model based PEM fuel cell state-of-health monitoring via ac impedance measurements," Journal of Power Sources, vol. 159, no. 2, pp. 905-913, 2006.
• A. Weiß, S. Schindler, S. Galbiati, M. A. Danzer, and R. Zeis, "Distribution of relaxation times analysis of high-temperature PEM fuel cell impedance spectra," Electrochimica Acta, vol. 230, pp. 391-398, 2017.
• M. Kendig, F. Mansfeld, and S. Tsai, "Determination of the long term corrosion behavior of coated steel with AC impedance measurements," Corrosion Science, vol. 23, no. 4, pp. 317-329, 1983.
• J. Zhang, P. J. Monteiro, and H. F. Morrison, "Noninvasive surface measurement of corrosion impedance of reinforcing bar in concrete—part 1: experimental results," Materials Journal, vol. 98, no. 2, pp. 116-125, 2001.
• K. Jüttner and W. Lorenz, "Electrochemical impedance spectroscopy (EIS) of corrosion processes on inhomogeneous surfaces," in Materials Science Forum, 1989, vol. 44, pp. 191-204: Trans Tech Publ.
• M. Behzadnasab, S. Mirabedini, M. Esfandeh, and R. Farnood, "Evaluation of corrosion performance of a self-healing epoxy-based coating containing linseed oil-filled microcapsules via electrochemical impedance spectroscopy," Progress in Organic Coatings, vol. 105, pp. 212-224, 2017.
• J. C. Gomez-Vidal, A. Fernandez, R. Tirawat, C. Turchi, and W. Huddleston, "Corrosion resistance of alumina forming alloys against molten chlorides for energy production. II: Electrochemical impedance spectroscopy under thermal cycling conditions," Solar Energy Materials and Solar Cells, vol. 166, pp. 234-245, 2017.
• E. Katz and I. Willner, "Probing biomolecular interactions at conductive and semiconductive surfaces by impedance spectroscopy: routes to impedimetric immunosensors, DNA‐sensors, and enzyme biosensors," Electroanalysis: An International Journal Devoted to Fundamental and Practical Aspects of Electroanalysis, vol. 15, no. 11, pp. 913-947, 2003.
• M. Varshney and Y. Li, "Interdigitated array microelectrodes based impedance biosensors for detection of bacterial cells," Biosensors and Bioelectronics, vol. 24, no. 10, pp. 2951-2960, 2009.
• A. Manickam, A. Chevalier, M. McDermott, A. D. Ellington, and A. Hassibi, "A CMOS electrochemical impedance spectroscopy (EIS) biosensor array," IEEE Transactions on Biomedical Circuits and Systems, vol. 4, no. 6, pp. 379-390, 2010.
• W. Cai, S. Xie, J. Zhang, D. Tang, and Y. Tang, "An electrochemical impedance biosensor for Hg2+ detection based on DNA hydrogel by coupling with DNAzyme-assisted target recycling and hybridization chain reaction," Biosensors and Bioelectronics, vol. 98, pp. 466-472, 2017.
• J. Dailey, M. Fichera, E. Silbergeld, and H. E. Katz, "Impedance spectroscopic detection of binding and reactions in acid-labile dielectric polymers for biosensor applications," Journal of Materials Chemistry B, vol. 6, no. 19, pp. 2972-2981, 2018.
• N. Bonanos et al., "Applications of impedance spectroscopy," Impedance spectroscopy: Theory, experiment, and applications, pp. 175-478, 2018.
• S. Erol, "Electrochemical impedance spectroscopy analysis and modeling of lithium cobalt oxide/carbon batteries," Ph.D. Dissertation, University of Florida, 2015.
• M. Doyle, J. P. Meyers, and J. Newman, "Computer simulations of the impedance response of lithium rechargeable batteries," Journal of the Electrochemical Society, vol. 147, no. 1, p. 99, 2000.
• M. Doyle and J. Newman, "Modeling the performance of rechargeable lithium-based cells: design correlations for limiting cases," Journal of Power Sources, vol. 54, no. 1, pp. 46-51, 1995.
• T. F. Fuller and J. N. Harb, Electrochemical engineering. John Wiley & Sons, 2018.
• D. Aurbach, "Review of selected electrode–solution interactions which determine the performance of Li and Li ion batteries," Journal of Power Sources, vol. 89, no. 2, pp. 206-218, 2000.
• U. Morali and S. Erol, "Analysis of electrochemical impedance spectroscopy response for commercial lithium-ion batteries: modeling of equivalent circuit elements," Turkish Journal of Chemistry, vol. 44, no. 3, pp. 602-613, 2020.
• U. Morali and S. Erol, "The comparison of electrochemical impedance behaviors of lithium-ion and nickel-metal hydride batteries at different state-of-charge conditions," Journal of the Engineering and Architecture Faculty of Eskişehir Osmangazi University, vol. 28, no. 1, pp. 1-8, 2020.
• U. Morali, "Influence of charge conditions on battery dynamics of a commercial lithium-ion cell," Hacettepe Journal of Biology and Chemistry, vol. 48, no. 3, pp. 203-210, 2020.
• U. Morali and S. Erol, "Electrochemical impedance analysis of 18650 lithium-ion and 6HR61 nickel-metal hydride rechargeable batteries," Journal of the Faculty of Engineering and Architecture of Gazi University, vol. 35, no. 1, pp. 297-310, 2020.
• S. Erol, Impedance Analysis and Modeling of Lithium-ion Batteries. Lap Lambert, 2016.