Investigation of Low-Temperature Behavior of Stone Mastic Asphalt Mixtures Modified with Paraffin and Crumb Rubber

Yıl 2017, Cilt: 21 Sayı: 3, 683 - 688, 08.08.2017

Baha Vural Kök , Mehmet Yılmaz , Mustafa Akpolat

Öz

In hot mix asphalts at low temperatures, cracks occur due to thermal tension and these cracks cause water to leak inside the pavement and the pavement gets deformed sooner than expected. In order to improve the properties of bituminous mixtures, mostly polymer type additives are used in the modification of the bitumen. These types of improvements usually have positive effects on the high-temperature behavior of the mixture. In this study, semi-circular bending test, which is the most commonly used method in the literature to investigate the low-temperature behavior of bituminous mixtures, was performed. In the study, the resistance of stone mastic asphalt mixtures, which were prepared with modified bitumen with a constant 3% of paraffin and various amounts of crumb rubber, to crack formation and its movement was identified. As a result, it was concluded that the effects of additives on crack formation and its movement is varied and the relation between the fractured aggregate surface areas and the fracture toughness of the mixture can be determined by the image processing method.

Anahtar Kelimeler

Crumb rubber, Paraffin; Low-temperature crack; Fracture toughness

Kaynakça

• [1] Öztürk, E.A. 2004. Karayolu esnek üstyapi tasariminda yeni bir yöntem: yüksek performansli asfalt kaplama. Journal of the Faculty of Engineering and Architecture of Gazi University 19(2): 175-184.
• [2] Ameri, M, Mansourian, A.H., Khavas, M, et al. 2011. Cracked asphalt pavement under traffic loading – A 3D finite element analysis. Eng Fract Mech 78:1817–1826.
• [3] Aliha, M.R.M., Behbahani, H, Fazaeli, H., Rezaifar, M.H. 2014. Study of characteristic specification on mixed mode fracture toughness of asphalt mixtures. Constr Build Mater 54:623–635.
• [4] Majidzadeh, K. 1976. Application of fracture mechanics for improved design of bituminous concrete. Dept. of Transportation Federal Highway Administration ;;For sale by the National Technical Information Service, Washington ;Springfield Va.
• [5] Molenaar, A.A., Scarpas, A.A., Liu, X., Erkens, G. 2002. Semi-Circular Bending Test; Simple But Useful. J Assoc Asph Paving Technol 71:794–815.
• [6] Li, X-J, Marasteanu, M.O. 2010. Using Semi Circular Bending Test to Evaluate Low Temperature Fracture Resistance for Asphalt Concrete. Exp Mech 50:867–876.
• [7] Baek, S-H, Hong, J-P, Kim, S., et al. 2011. Evaluation of Fracture Toughness of Semirigid Asphalt Concretes at Low Temperatures. Transp Res Rec J Transp Res Board 2210:30–36.
• [8] Pérez-Jiménez, F., Botella, R., Moon, K-H., Marasteanu, M. 2013. Effect of load application rate and temperature on the fracture energy of asphalt mixtures. Fénix and semi-circular bending tests. Constr Build Mater 48:1067–1071.
• [9] Huang, B., Shu, X., Zuo, G. 2013. Using notched semi circular bending fatigue test to characterize fracture resistance of asphalt mixtures. Eng Fract Mech 109:78–88.
• [10] Kök, B.V., Çolak, H. 2011. Laboratory comparison of the crumb-rubber and SBS modified bitumen and hot mix asphalt. Constr Build Mater 25:3204–3212.
• [11] Liu, Y., Han, S., Zhang, Z., Xu, O. 2012. Design and evaluation of gap-graded asphalt rubber mixtures. Mater Des 35:873–877.
• [12] de Almeida Júnior, A.F., Battistelle, R.A., Bezerra, B.S., de Castro, R. 2012. Use of scrap tire rubber in place of SBS in modified asphalt as an environmentally correct alternative for Brazil. J Clean Prod 33:236–238.
• [13] Bennert, T., Maher, A., Smith, J. 2004. Evaluation of Crumb Rubber in Hot Mix Asphalt. Piscataway, NJ
• [14] Mull, M.A., Stuart, K., Yehia, A. 2002. Fracture resistance characterization of chemically modified crumb rubber asphalt pavement. J Mater Sci 37:557–566.
• [15] Wang, H., Dang, Z., Li, L., You, Z. 2013. Analysis on fatigue crack growth laws for crumb rubber modified (CRM) asphalt mixture. Constr Build Mater 47:1342–1349.
• [16] Çelik, O.N., Atiş, C.D. 2008. Compactibility of hot bituminous mixtures made with crumb rubber-modified binders. Constr Build Mater 22:1143–1147.
• [17] Kim, H., Jeong, K-D, Lee, M.S, Lee, S-J. 2014. Performance properties of CRM binders with wax warm additives. Constr Build Mater 66:356–360.
• [18] Oliveira, J.R.M, Silva, H.M.R.D., Abreu, L.P.F., Fernandes, S.R.M. 2013. Use of a warm mix asphalt additive to reduce the production temperatures and to improve the performance of asphalt rubber mixtures. J Clean Prod 41:15–22.
• [19] Kök, B.V., Yılmaz, M., Akpolat, M. 2014. Evaluation of the conventional and rheological properties of SBS+Sasobit modified binder. Constr Build Mater 63:174–179.