ANALYSIS OF THERMO-PHYSIOLOGICAL COMFORT AND MOISTURE MANAGEMENT PROPERTIES OF FLAT KNITTED SPACER FABRICS

Yıl 2017, Cilt: 27 Sayı: 3, 241 - 250, 30.09.2017

Gözde Ertekin

Öz

This study aims to investigate the effect of surface material type, monofilament yarn diameter and inclination angle on the thermal
comfort and moisture management properties of the flat knitted spacer fabrics. For this purpose, seven different spacer fabrics were
knitted by using different type of surface materials (Multifilament polyester and Coolmax®) and by varying the monofilament yarn
parameters (yarn diameter of 0.28, 0.38, 0.48 mm and connecting distances of spacer yarns (three, five, seven needles shifting). The
thermo-physiological comfort (air permeability, water vapour permeability and thermal resistance) and liquid moisture transport
capabilities of these fabrics were tested and evaluated statistically. The results indicated that, the most effective factor on the thermo-
physiological comfort and moisture management properties is the raw material. Due to their channelled structure, fabrics containing
Coolmax® yarns with higher air permeability, water vapour permeability index, thermal resistance and OMMC values provide better
thermo-physiological comfort and liquid moisture transfer properties. 

Anahtar Kelimeler

Flat knitted spacer fabric, Surface material, Monofilament yarn diameter, Monofilament yarn inclination angle, Thermal comfort, Moisture management

DÜZ ÖRME SANDVİÇ KUMAŞLARIN TERMO-FİZYOLOJİK KONFOR VE NEM İLETİM ÖZELLİKLERİNİN ANALİZİ

Öz

Bu çalışmada düz örme sandviç kumaşların ısıl konfor ve nem iletim özelliklerine kumaş yüzeyinde kullanılan iplik tipi,
monofilament iplik çapı ve monofilament iplik yerleşim açısının etkisi incelenmiştir. Bu amaçla farklı iplik tipleri (multifilament
polyester ve Coolmax®) kullanılarak ve monofilament iplik parametreleri (0.28, 0.38 ve 0.48 monofilament iplik çapı ve monofilament
iplik yerleşim açısı (askının 3, 5, 7 iğne kaydırılması)) değiştirilerek yedi farklı sandviç kumaş üretilmiştir. Kumaşların hava
geçirgenliği, su buharı geçirgenliği ve ısıl direnç gibi termo-fizyolojik özellikleri ile sıvı nem iletim yetenekleri test edilmiş ve
istatistiksel olarak değerlendirilmiştir. Çalışmanın sonucunda termo-fizyolojik konfor ve nem iletim özelliklerine etki eden en önemli
faktörün yüzeyde kullanılan iplik tipi olduğu tespit edilmiştir. Kanallı yapısı sayesinde Coolmax® içeren kumaşların yüksek hava
geçirgenliği, su buharı geçirgenliği indeksi, ısıl direnç ve OMMC değerleri ile daha iyi ısıl konfor ve sıvı nem iletim özelliklerine sahip
olduğu belirlenmiştir. 

Anahtar Kelimeler

Düz örme sandviç kumaş, Yüzeyde kullanılan iplik tipi, Monofilament iplik çapı, Monofilament iplik yerleşim açısı, Isıl konfor, Nem yönetimi

Kaynakça

• 1. Ertekin G. and Marmaralı A., 2011, “Heat, Air and Water Vapor Transfer of Circular Knitted Spacer Fabrics”, Tekstil ve Konfeksiyon, Vol:21(4), pp:369-373.
• 2. Bruer S.M., Powell N. and Smith G., 2005, “Three-Dimensionally Knit Spacer Fabrics: A Review of Production Techniques and Applications”, Journal of Textile and Apparel, Technology and Management, Vol: 4(4), pp:1-31.
• 3. Crina B., Blaga M., Luminita V. and Mishra R., 2013, “Comfort Properties of Functional Weft Knitted Spacer Fabrics”, Tekstil ve Konfeksiyon, Vol: 23(3), pp:220-227.
• 4. Mao N. and Russell S. J., 2007, “The Thermal Insulation Properties of Spacer Fabrics with a Mechanically Integrated Wool Fiber Surface”, Textile Research Journal, Vol: 77(12), pp: 914-922.
• 5. Ertekin G. and Marmaralı A., 2012, “The Compression Characteristic of Weft Knitted Spacer Fabrics”, Tekstil ve Konfeksiyon, Vol: 22(4), pp:340-345.
• 6. Arumugam V., Mishra R., Militky J. and Salacova J., 2017, “Investigation on Thermo-Physiological and Compression Characteristics of Weft-Knitted 3D Spacer Fabrics”, The Journal of The Textile Institute, Vol: 108(7), pp:1095-1105.
• 7. Liu Y. and Hu H., 2011, “Compression Property and Air Permeability of Weft‐Knitted Spacer Fabrics”, The Journal of the Textile Institute, Vol: 102(4), pp:366-372.
• 8. Mishra R., Veerakumar A. and Militky J., 2016, “Thermo-Physiological Properties of 3D Spacer Knitted Fabrics”, International Journal of Clothing Science and Technology, Vol: 28(3), pp: 328-339.
• 9. Oğlakcıoğlu N.,2016, “Design of Functional Knitted Fabrics for Medical Corsets with High Clothing Comfort Characteristics”, Journal of Industrial Textiles, Vol: 45(5), pp: 1009-1025.
• 10. Sampath M. B., Aruputharaj A., Senthilkumar M. and Nalankilli G., 2012, “Analysis of Thermal Comfort Characteristics of Moisture Management Finished Knitted Fabrics Made from Different Yarns”, Journal of Industrial Textiles, Vol: 42(1), pp:19-33.
• 11. Delkumburewatte G. B. and Dias T., 2009, “Porosity and Capillarity of Weft Knitted Spacer Structures”, Fibers and Polymers, Vol: 10(2), pp: 226-230.
• 12. Yip J. and Ng S.P., 2008, “Study of Three-Dimensional Spacer Fabrics: Physical and Mechanical Properties”, Journal of Materials Processing Technology, Vol: 206(1), pp: 359-364.
• 13. Pereira S., Anand S.C., Rajendran S. and Wood C., 2007, “A Study of the Structure and Properties of Novel Fabrics for Knee Braces”. Journal of Industrial Textiles, Vol: 36(4), pp: 279-300.
• 14. Bajzik V., Hes L. and Dolezal I., 2016, “Changes in Thermal Comfort Properties of Sports Wear and Underwear due to Their Wetting”, Indian Journal of Fibre & Textile Research, Vol: 41(2), pp:161-166.
• 15. Moisture Management Tester operation manual.
• 16. Roy Choudhury A.K., Majumdar P. K. and Datt C., 2011, “Improving Comfort in Clothing”, Woodhead Publishing Series in Textiles, No.106, Edited by Song, G., pp: 26-27.
• 17. Ertekin G., Oğlakcıoğlu N., Marmaralı A., Eser B. and Pamuk M., 2015, “Thermal Transmission Attributes of Knitted Structures Produced by Using Engineered Yarns”, Journal of Engineered Fabrics & Fibers, Vol: 10(4), pp: 72-78.
• 18. Bagherzadeh R., Gorji M., Latifi M., Payvandy P. and Kong L. X., 2012, “Evolution of Moisture Management Behavior of High-Wicking 3D Warp Knitted Spacer Fabrics”, Fibers and Polymers, Vol: 13(4), pp: 529-534.
• 19. Saville B.P., 1999, “Physical Testing of Textiles”, Woodhead Publishing Series in Textiles, pp: 224.
• 20. http://www.coolmax.invista.com/ Accessed at 25.07.2017
• 21. Süpüren G., Oğlakcıoğlu N., Özdil N. ve Marmaralı A., 2011, “Moisture Management and thermal Absorptivity Properties of Double-Face Knitted Fabrics”, Textile Research Journal, Vol: 81(13), pp: 1320-1330.
• 22. Shabaridharan S. and Das A., 2012, “Study on Heat and Moisture Vapour Transmission Characteristics Through Multilayered Fabric Ensembles”, Fibers and Polymers, Vol: 13(4), pp: 522-528.
• 23. Öner E., Atasagun H. G., Okur A., Beden A. R. and Durur G., 2013, “Evaluation of Moisture Management Properties on Knitted Fabrics”, The Journal of The Textile Institute, Vol: 104, pp: 699–707.
• 24. Hu J., Li Y., Yeung, K., Wong, A.S.W. and Xu, W., 2005, “Moisture Management Tester: A Method to Characterize Fabric Liquid Moisture Management Properties”, Textile Research Journal, Vol: 75, pp: 57–62.