THE INFLUENCE OF RHEOLOGICAL PROPERTIES OF THE PRETREATMENT THICKENERS ON INK-JET PRINTING QUALITY

Yıl 2012, Cilt: 22 Sayı: 4, 309 - 316, 31.12.2012

Deniz Onar Çatal Arif Taner Özgüney , E. Perrin Akçakoca Kumbasar

Öz

Pretreatment process is very important for ink jet printing system. Pretreatment solutions that is transferred to the cotton fabric

before reactive ink-jet printing affects printing quality. In this study, the influence of the rheological properties of pretreatment

thickeners on printing quality and color yield has been researched. The reological properties of the pretreatment sollution is determined

mainly by the rheological properties of the thickener that is used. The influence of the rheological properties of the pretreatment

sollutions which is prepared with different kind of thickeners at different concentrations, on paste add-on, penetration and colour yield

values is investigated. As a result, it was observed in this study that at applied conditions the rheological properties of the pretreatment

pastes applied have not a significant influence on color yield and ink-jet printing quality.

Anahtar Kelimeler

Ink-jet printing, Rheological properties, Thickeners

Kaynakça

• 1. Tippett B. G., 2002, “The Evolution And Progression Of Digital Textile Printing”, AATCC, http://www.brookstippett.com/docs/Print2002-BGT.pdf (Access Date: 10 December 2011).
• 2. Özgüney. A. T., Özerdem. A. and Özkaya. K., 2007, “Ön Terbiye İşlemlerinin Parça Baskı Prosesi Sırasında Meydana Gelen Sararma Üzerine Etkileri”, Tekstil ve Konfeksiyon Dergisi, Vol: 17(1), 45p.
• 3. Provost, J., 2009, “Ink Jet Printing on Textiles” http://provost-inkjet.com/resources/ Ink+Jet+Printing+on+Textiles.pdf (Access Date: 10 December 2011)
• 4. George B., Govindaraj M., Ujiie H., Wood D., Freeman H., Hudson S. and El-Shafei, A., 2003, “Integration of Fabric Formation and Coloration Processes”, NTC Project: C02-PH03, 10p.
• 5. Tyler D.J., 2005, “Textile Digital Printing Technologies“, Textile Progress, Vol : 37(4):58p.
• 6. Boger D. V. and Walters K., 1993, “Rheological Phenomenia in Focus”, Elsevier, Amsterdam, Netherland, 1-10pp.
• 7. Barnes H. A., Hutton J. F. and Walters K., 1989, “An Introduction to Rheology”, Elsevier, Amsterdam, 1-35pp.
• 8. Laba D., 1993, “Rheological Properties of Cosmetics and Toiletries”, Cosmetic Science and Technology Series, 13, 35-54pp.
• 9. Akçakoca E. P., 2005, “Paste Add-on and Penetration Values of High and Low Viscosity Alginate, AATCC Review, International Magazine For Textile Design And Testing, Vol: 5(6), 17-22pp.
• 10. Akçakoca Kumbasar E. P., 2007, “Mixture Printing Pastes from High Substitued Guar Gum and Alginates on Reactive Printing of Viscose”, Journal of Applied Polymer Science, Vol: 103(2), 745-751pp.
• 11. Turk S. S. and Schneider R., 2000, “Printing of a High Substituted Guar Gum and Its Mixture With Alginate”, Dyes and Pigments, Vol: 47(3), 269-275pp.
• 12. Parys M. and Garez I., 2002, “The Future Printing Will Be Digital”, Melliand China, Vol: 3, 1-2pp.
• 13. Fijan R., Basile M., Lapasin R. and Turk S. S., 2009, “Rheological Properties of Printing Pastes and Their Influence on Quality-Determining Parameters in Screen Printing of Cotton With Reactive Dyes Using Recycled Polysaccharide Thickeners”, Carbohydrate Polymers, Vol:78(1), 25-35pp.
• 14. Özgüney A. T. and Sarıkaya E., 2000, “Terbiye İşletmesindeki Baskı Hatalarının Sayısal Verilerle Analizi Üzerine Bir Araştırma”, Tekstil ve Konfeksiyon Vol: 10(5), 129p.