PERFORMANCE ANALYSIS OF A STEAM TURBINE POWER PLANT AT PART LOAD CONDITIONS

Year 2017, Volume: 3 Issue: 2, 1121 - 1128, 01.04.2017

A. Sinan Karakurt , Umit Gunes

https://doi.org/10.18186/thermal.298611

Cited By: 27

Abstract

Power consumption highly
increases which is related with the growing of the industrial plants and daily
using. Increasing power demand can be supplied with building up more efficient
plants or optimized old power plants. One of the most important items of a
power plant is steam turbine which is designed according to defined parameters
(inlet pressure and temperature, flow rates, outlet pressure and power) which
also effect the dimensions and performance of the turbine. Turbine loses and
irreversibilities are minimum and so efficiencies and power generation are
maximum at design conditions. However, power plants always have to operate at
off-design or part-load conditions because of the changing of power demands and
drop outs of the turbines and other items of the plants. In this study, it is
aimed to analyses the isentropic efficiency of a high pressure steam turbine
and thermal efficiency of power plant at different load conditions. Analyses
showed that both steam turbines and power plant performance were reduced when
the power plant operates at partial load conditions.

Keywords

Off design conditions, thermal efficiency, isentropic efficiency, power plant, steam turbine

References

• [1] “BP Energy Outlook 2035,” British Petroleum, Statistical Review, 2015.
• [2] C. S. Bresolin, P. S. Schneider, H. A. Vielmo, and F. H. R. França, “Applications of Steam Turbines Simulation Models in Power Generations Systems,” Eng. Térmica Therm. Eng., vol. 5, no. 1, pp. 73–77, Jul. 2006.
• [3] C. D. Weir, “An Analytical Approach to the Estimation of the Performance of Steam Turbine Cycles Off-Design,” Proc. Inst. Mech. Eng. Part J. Power Energy, vol. 199, no. 1, pp. 33–43, Feb. 1985.
• [4] D. H. Cooke, “Modeling of Off-Design Multistage Turbine Pressures by Stodola’s Ellipse.” Bechtel Power Co., Nov-1983.
• [5] M. Petrovic and W. Riess, “Off-design flow analysis of low-pressure steam turbines,” Proc. Inst. Mech. Eng. Part J. Power Energy, vol. 211, no. 3, pp. 215–224, May 1997.
• [6] N. Herzog, M. Binner, J. R. Seume, and K. Rothe, “Verification of Low-Flow Conditions in a Multistage Turbine,” pp. 563–574, Jan. 2007.
• [7] G. A. Gerolymos and C. Hanisch, “Multistage three-dimensional Navier-Stokes computation of off-design operation of a four-stage turbine,” Proc. Inst. Mech. Eng. Part J. Power Energy, vol. 213, no. 4, pp. 243–261, Jun. 1999.
• [8] L. He, “Computation of unsteady flow through steam turbine blade rows at partial admission,” Proc. Inst. Mech. Eng. Part J. Power Energy, vol. 211, no. 3, pp. 197–205, May 1997.
• [9] M. Šťastný, P. Šafařík, I. Hořejší, and R. Matas, “Flow around the sections of rotor blading of a turbine stage with relatively long blades at off-design conditions,” Proc. Inst. Mech. Eng. Part J. Power Energy, vol. 211, no. 3, pp. 207–213, May 1997.
• [10] A.. Mandal, “Off design performance prediction of steam turbines,” Department Of Mechanical Engineering Indian Institute Of Technology, Delhi, Project Report, 2005.