ANN IN ESTIMATION SHEAR MODULUS OF LAMINATE COMPOSITE

Yıl 2018, Cilt: 1 Sayı: 1, 1 - 5, 30.12.2018

Halil İbrahim Kurt , Necip Fazıl Yılmaz , Murat Oduncuoğlu

Öz

Abstract

 

The shear modulus of the
composite materials and the elastic properties of the fiber are similar to each
other. In this study, the effect of reinforcing type and weight ratio on the
shear modulus of carbon/epoxy and kevlar/epoxy composites was theoretically
investigated and the average error rates and correlation values were analyzed.
Artificial neural networks approach was used in the study. The ratio of Ssa/SiC
was determined as minimum and maximum of 0 and 20, respectively. In artificial
neural network method, 6 neurons one hidden layer were used. It was observed
that SiC was an important reinforcing phase for kevlar/epoxy composites but it
was not for carbon/epoxy composites.

Anahtar Kelimeler

ANN, Composite, Kevlar

Kaynakça

• 1. Hull, D.; Clyne, T. An introduction to composite materials. Cambridge university press: 1996.2. Cha, K.K. Composite materials: Science and engineering. Springer New York: 2013.3. Chawla, K.K. Composite materials: Science and engineering. Springer.4. Kainer, K.U. Metal matrix composites: Custom-made materials for automotive and aerospace engineering. John Wiley & Sons: 2006.5. Prasad, D.S.; Shoba, C.; Ramanaiah, N. Investigations on mechanical properties of aluminum hybrid composites. Journal of Materials Research and Technology 2014, 3, 79-85.6. On the use of nanocellulose as reinforcement in polymer matrix composites. Composites Science and Technology 2014.7. Stress transfer in polyacrylonitrile/carbon nanotube composite fibers. Polymer 2014.8. Polymer/carbon nanotube nano composite fibers–a review. ACS Applied Materials & Interfaces 2014, 140212091302006.9. Ku, H.; Wang, H.; Pattarachaiyakoop, N.; Trada, M. A review on the tensile properties of natural fiber reinforced polymer composites. Composites Part B: Engineering 2011, 42, 856-873.10. Erkliğ, A.; Bulut, M.; Fayzulla, B. Toughening effect of microscale particles on the tensile and vibration properties of s-glass-fiber-reinforced epoxy composites. Mechanics of Composite Materials 2018, 54, 119-128.11. Bulut, M.; Alsaadi, M.; Erklig, A. A comparative study on the tensile and impact properties of kevlar, carbon, and s-glass/epoxy composites reinforced with sic particles. Materials Research Express 2018.12. Alsaadi, M.; Erkliğ, A. Effect of perlite particle contents on delamination toughness of s-glass fiber reinforced epoxy matrix composites. Composites Part B: Engineering 2018.13. Bulut, M.; Alsaadi, M.; Erkliğ, A. Tensile and impact characterization of s-glass/epoxy composite laminates containing microscale borax, perlite, and sewage sludge ash particles. Journal of the Brazilian Society of Mechanical Sciences and Engineering 2018, 40, 199.