EFFECT OF INPUT PARAMETERS ON THE DEPTH OF HEAT AFFECTED ZONE (HAZ) AISI H13 STEEL ELECTRİCAL DİSCHARGE MACHİNİNG PROCESS (EDM)

Yıl 2019, Cilt: 2 Sayı: 2, 33 - 38, 31.12.2019

Mansour Nasiri Khalaji , Reza Matin Rohollah Rahmani Mohammad Reza Shabgard

Öz

Abstract

The importance of surface integrity of electric discharge machined components has been recognized by the industry and it is still continues to be the major concern among the researchers. This paper presents a study of the relationship between EDM input parameters (duty cycle, pulse-on time and tool polarity) and surface integrity. This study shows that, in both cases of tool polarity (positive and negative), with increasing pulse on-time and duty cycle, the rate of hardness decline in the layers near the machined surfaces is augmented and the depth of the heat affected zone is increased, also in the negative polarity the amount of hardness decline and depth of the heat affected zone is small. Also, according to the results of the EDX analyze, In the positive polarity, the rate of penetration of the carbon diffusion is higher than the negative polarity. 

Anahtar Kelimeler

Pulse Duration, Duty Cycle, Polarity, Micro Hardness

Kaynakça

• 1. E. C. Jameson, Electrical Discharge Machining, Society of Manufacturing Engineers, Michigan, p. 1, 2001.2. H.T. Lee, T.Y. Tai, "Relationship between EDM parameters and surface crack formation", Journal of Materials Processing Technology, Vol. 142, pp. 676–683, 20033. H. Yan, J. Hua, R. Shivpuri, "Numerical simulation of finish hard turning for AISI H13 die steel", Science and Technology of Advanced Materials, Vol. 6, pp. 540–547, 2005. 4. W. Tebni, M. Boujelbene and E. Bayraktar, "Parametric approach model for determining electrical discharge machining (EDM) conditions: Effect of cutting parameters on the surface integrity", The Arabian Journal for Science and Engineering,Vol. 34, pp. 101-114, 2009.5. H. Kokubo, H. Takezawa, K. Horio, N. Mohri and T.Yamazaki, "A study on the material removal mechanism in EDM-single discharge experiments with low melting temperature alloy-", American Society for precision Engineering publications, 2004.6. Ph. T. Eubank, M. R. Patel and M. A. Barrufet, "Theoretical models of the electrical discharge machining process, I. A simple cathode erosion model", Journal of Applied Physics, Vol. 66, pp. 4095-4103, 1989.7. A. Descoeudres, "characterization of electrical discharge machining plasmas", Ph. D. Thesis, University of Lausanne, India, 2006.
• 8. H. Khoshkish, H.&. Ashtiani, M.. Qureshi, "Effect of electrical discharge machining characteristics of the tool electrode made of tool steel AISI D3," Iran's First International Congress on Manufacturing Engineering University, December 2002.9. M. Sadeghi. Aval SH, &. Ismail-Zadeh, F.. Kolahan, "Modeling and optimization of machining parameters of Wire Cut Steel 2601 Srdkar algorithm using tabu search," the Tenth Conference of Manufacturing Engineering of Iran, Babylon Noshirvani University of Technology, March 2006.10. S. Kumara, R. Singhb, T.P. Singhc, B.L. Sethi, "Surface modification by electrical discharge machining: A review", Journal of Materials Processing Technology, Vol. 209, pp. 3675–3687, 2009. 11. M. AS. Golozar, principles and applications of heat treatment of steels Center, Isfahan University Press 1998.12. A. Pandey, Sh. Singh, "Current research trends in variants of electrical discharge machining: A review",International Journal of Engineering Science and Technology, Vol. 2(6), pp. 2172-2191, 2010.