STRUCTURAL AND SURFACE PROPERTIES OF GLASS POWDER COATED Cr STEELS

Yıl 2021, Cilt: 4 Sayı: 2, 109 - 116, 31.12.2021

Ayşe Nur Acar , Doğan Kaya , Abdul Kadir Ekşi , Ahmet Ekicibil

Öz

The most common used glasses are soda-lime-silica glasses, which contain alkaline and alkaline earth oxide materials, such as silicon, sodium, aluminum oxides, etc., and these soda-lime-silica glasses are used in different applications such as windows, bottles, etc. Glass powder is acquired by grinding of waste glass cracks and applied as an additive in structural materials due to its compositions. In this study, the effect of glass powder on the surface and structural properties of Cr steel sheets has been investigated. Cr steels coated with dehydrated glass powder have been annealed at 950 °C temperature in the furnace for various hours and cooled to room temperature in the furnace. The surface and structural properties of these coated steel sheets have been investigated by optical microscopy images, Scanning electron microscopy images, Energy dispersive x-ray spectroscopy data. The crystal structures of these sheet samples have been recorded with x-ray diffraction patterns. As a result, glass powder on the surfaces of Cr steel sheets has not melted homogeneously and surface appearances of these steel sheets have been obtained as waved textures.

Anahtar Kelimeler

Cr steel, glass powder, heat treatment, structural property, surface property.

Kaynakça

• A.C. Souza, M.F. Pereira, L.C. Mossin, Thermal and mechanical characterization of blindex glass powder residue® for the production of ecological coating, Journal of Materials Research and Technology 12 (2021) 1794-1803.
• H. Zhang, Y. Hu, G. Hou, Y. An, G. Liu, The effect of high-velocity oxy-fuel spraying parameters on microstructure, corrosion and wear resistance of Fe-based metallic glass coatings, Journal of Non-Crystalline Solids 406 (2014) 37-44.
• G. Gruben, D. Vysochinskiy, T. Coudert, A. Reyes, O.G.J.S. Lademo, Determination of Ductile Fracture Parameters of a Dual‐Phase Steel by Optical Measurements, 49(3) (2013) 221-232.
• G. Sander, D. Jiang, Y. Wu, N.J.M. Birbilis, Design, Exploring the possibility of a stainless steel and glass composite produced by additive manufacturing, 196 (2020) 109179.
• J. Ehlers, D.J. Young, E.J. Smaardijk, A.K. Tyagi, H.J. Penkalla, L. Singheiser, W.J. Quadakkers, Enhanced oxidation of the 9%Cr steel P91 in water vapour containing environments, Corrosion Science 48(11) (2006) 3428-3454.
• T. Onizawa, T. Wakai, M. Ando, K. Aoto, Effect of V and Nb on precipitation behavior and mechanical properties of high Cr steel, Nuclear Engineering and Design 238(2) (2008) 408-416.
• L. Ding, W. Ning, Q. Wang, D. Shi, L. Luo, Preparation and characterization of glass-ceramic foams from blast furnace slag and waste glass, Materials Letters 141 (2015) 327-329.
• H. Samad, M. Jaafar, R. Othman, M. Kawashita, N.H. Abdul Razak, New bioactive glass-ceramic: Synthesis and application in PMMA bone cement composites, Bio-medical materials and engineering 21 (2011) 247-58.
• A. Ziewiec, E. Tasak, M. Witkowska, K. Ziewiec, Microstructure and Properties of Welds of Semi-Austenitic Precipitation Hardening Stainless Steel after Heat Treatment, Archives of Metallurgy and Materials 58 (2013).
• B. Yu, Y. Du, L. Wei, X. Zhang, G. Zuo, Y. Wang, S. Ye, Valorization of Coal Gangue and Vanadium-titanium Slag into Glass-ceramic Coating for Oxidation Resistance of 60Si2Mn Spring Steel at High Temperature, ISIJ International 61(1) (2021) 326-334.
• A.G. Fernández, M.I. Lasanta, F.J. Pérez, Molten Salt Corrosion of Stainless Steels and Low-Cr Steel in CSP Plants, Oxidation of Metals 78(5) (2012) 329-348.
• A. Chowaniec, Ł. Sadowski, A. Żak, The chemical and microstructural analysis of the adhesive properties of epoxy resin coatings modified using waste glass powder, Applied Surface Science 504 (2020) 144373.
• R.D. Rawlings, J.P. Wu, A.R. Boccaccini, Glass-ceramics: Their production from wastes—A Review, Journal of Materials Science 41(3) (2006) 733-761.
• O. Bretcanu, S. Spriano, E. Verné, M. Cöisson, P. Tiberto, P. Allia, The influence of crystallised Fe3O4 on the magnetic properties of coprecipitation-derived ferrimagnetic glass–ceramics, Acta Biomaterialia 1(4) (2005) 421-429.