Comparison of canal transportations and centering ability of rotary instrument systems with different heat-treated NiTi alloys: An in vitro CBCT study

Yıl 2022, , 81 - 86, 30.08.2022

Mukadder İnci Başer Kolcu , Gülter Devrim Kaki

https://doi.org/10.56150/tjhsl.1076773

Öz

One of the most important stages in root canal treatment is shaping. Manufacturers have developed various equipment and techniques to achieve better shaping abilities This study aims to evaluate the effects of 3 different rotary file systems, produced with the different heat-treated NiTi alloys technology on root canal transportation and centering ability via CBCT. A total of 36, Vertucci Type IV mesiobuccal (MB) root canals of mandibular molars were used. After pre-instrumented CBCT images were taken, the samples were randomized according to initial canal curvature angles into three groups (n=12). Root canal instrumentation was completed according to the manufacturer’s instructions in all groups (VDW.Rotate, K3XF, Hyflex EDM). Post-instrumented CBCT images were taken. The root canal transportation and centering ability was calculated according to the Gambill et al described before (1996). Statistical analysis was performed using the IBM Statistics SPSS 20.01 program. One-way ANAVO and post-hoc Tukey tests were used for evaluating the differences among the groups. The significance level was set at P=0.05. There were no statistical differences at any level on canal transportation and centering ability according to groups. However, the tendency to transportation changed according to differences in horizontal levels. In conclusion, all systems produced similar canal transports in the mandıbular molar canals and these systems were all clinically acceptable limits.

Anahtar Kelimeler

canal transportation, centering ability, VDW.Rotate, Hyflex EDM

Kaynakça

• 1. Fidler A, Plotino G, Kuralt M. A Critical Review of Methods for Quantitative Evaluation of Root Canal Transportation. J Endod, (47), (2021), 721–31.
• 2. Peters OA. Current challenges and concepts in the preparation of root canal systems: A review. Journal of Endodontics, (30), (2004), 559–67.
• 3. Hulsmann M, Peters OA, Dummer PMH. Mechanical preparation of root canals: shaping goals, techniques and means. Endodontic Topics, 10(1), (2005), 30–76.
• 4. Short JA. A comparison of canal centering ability of four instrumentation techniques. Journal of Endodontics, 23(8), (1997), 503–7.
• 5. VDW. VDW.Rotate Product Brochure, (2022). Available from: https://www.vdw-dental.com/en/products/detail/vdwrotate/#download
• 6. Sabyrov N, Jahan MP, Bilal A, Perveen A. Ultrasonic vibration assisted electro-discharge machining (EDM)-An overview. Materials. Materials (Basel), (12), (2019).
• 7. Iacono F, Pirani C, Generali L, Bolelli G, Sassatelli P, Lusvarghi L, Gandolfi, M. G. Giorgini, L.& Prati, C. Structural analysis of HyFlex EDM instruments. International Endodontic Journal, 50(3), (2017), 303–13.
• 8. Daneshmand S, Kahrizi EF, Abedi E, Mir Abdolhosseini M. Influence of machining parameters on electro discharge machining of NiTi shape memory alloys. International Journal of Electrochemical Science. 8(3), (2013), 3095–104.
• 9. Cheung GSP, Shen Y, Darvell BW. Does Electropolishing Improve the Low-cycle Fatigue Behavior of a Nickel-Titanium Rotary Instrument in Hypochlorite? Journal of Endodontics, 33(10), (2007), 1217–21.
• 10. Scarfe WC, Levin MD, Gane D, Farman AG. Use of Cone Beam Computed Tomography in Endodontics. International Journal of Dentistry. 12, (2009), 1–20.
• 11. Razcha C, Zacharopoulos A, Anestis D, Mikrogeorgis G, Zacharakis G, Lyroudia K. Micro-Computed Tomographic Evaluation of Canal Transportation and Centering Ability of 4 Heat-Treated Nickel-Titanium Systems. Journal of Endodontics. 46(5), (2020), 675–81.
• 12. Cohen J. (2013): Statistical power analysis for the behavioral sciences. Routledge.
• 13. Estrela C, Bueno MR, Sousa-Neto MD, Pécora JD. Method for determination of root curvature radius using cone-beam computed tomography images. Brazilian Dental Journal, 19(2), (2008), 114–8.
• 14. Del Rio CE. Comparison of nickel-titanium and stainless steel hand-file instrumentation using computed tomography. Journal of Endodontics, 22(7), (1996), 369–75.
• 15. Karkehabadi H, Siahvashi Z, Shokri A, Haji Hasani N. Cone-beam computed tomographic analysis of apical transportation and centering ratio of ProTaper and XP-endo Shaper NiTi rotary systems in curved canals: an in vitro study. BMC Oral Health, 21, (2021), 211-19.
• 16. American Association of endodontists Special Committe. Glossary of Endodontic Terms 2016. Glossary of Endodontic Terms, 10(4), (2020)
• 17. Weine F (2003): Endodontic therapy. CV Mosby.
• 18. Shah DY, Wadekar SI, Dadpe AM, Jadhav GR, Choudhary LJ, Kalra DD. Canal transportation and centering ability of protaper and self-adjusting file system in long oval canals: An ex-vivo cone-beam computed tomography analysis. Journal of Conservative Dentistry, 20(2), (2017), 105–9.
• 19. Shokri A, Shakibaei Z, Langaroodi AJ, Safaei M. Evaluation of the mandibular canal visibility on cone-beam computed tomography images of the mandible. Journal of Craniofacial Surgery, 25(3), (2014), 56-68.
• 20. Eskandarloo A, Mirshekari A, Poorolajal J, Mohammadi Z, Shokri A. Comparison of cone-beam computed tomography with intraoral photostimulable phosphor imaging plate for diagnosis of endodontic complications: A simulation study. Oral Surgery, Oral Medicine, Oral Pathology and Oral Radiology, 114(6). (2012), 54-61.
• 21. Prasanthi NNVD, Rambabu T, Sajjan GS, Varma KM, Satish RK, Padmaja M. A comparative evaluation of the increase in root canal surface area and canal transportation in curved root canals by three rotary systems: A cone-beam computed tomographic study. Journal of Conservative Dentistry, 19(5), (2016), 434–9.
• 22. Pit A-B, Borcean I-A, Vargatu I-A, Mai A, Shyblak M, Mokdad S. Evaluation of the time and efficiency of TruNatomy, VDW.ROTATE, Protaper Gold and Reciproc Blue in shaping root canals - an in vitro study. Romanian Journal of Oral Rehabilitation. 12(3), (2020), 250–6.
• 23. Gündoğar M, Uslu G, Özyürek T, Plotino G. Comparison of the cyclic fatigue resistance of VDW.ROTATE, TruNatomy, 2Shape, and HyFlex CM nickel-titanium rotary files at body temperature. Restorative Dentistry & Endodontics, 45(3), (2020).
• 24. Uygun AD. Cyclic fatigue resistance of VDW.ROTATE and Reciproc Blue nickel-titanium files at root canal temperature. Journal of Dental Research, Dental Clinics, Dental Prospects, 14(3), (2020), 177–80.
• 25. Yılmaz K, Uslu G, Özyürek T. Effect of multiple autoclave cycles on the surface roughness of HyFlex CM and HyFlex EDM files: an atomic force microscopy study. Clinical Oral Investigations, 22(9), (2018), 2975–80.