PREVENT THE TRANSMISSION OF USELESS / REPEATED DATA TRANSMISSION IN THE INTERNET OF THINGS NETWORK

Yıl 2019, Cilt: 3 Sayı: 1, 39 - 42, 01.01.2019

Ercüment Öztürk , Ahmet Ulu , Tuğrul Çavdar

https://doi.org/10.31127/tuje.443482

Cited By: 3

Öz

Internet of Things (IoT) is a new and advanced network technology that incorporates inter-object communication and sensor technology that connects almost every controllable electronic device to be used in daily life with a different Internet Protocol (IP) address in a network environment. In a such large-scale network, data transmission, process monitoring, data processing and network traffic are also required to be addressed. Today's Internet architecture uses the TCP / IP protocol stack for communication and is insufficient to meet the needs of the large-scale IoT network. Therefore, it will be a big advantage to reduce the data traffic in an IoT network where large amounts of data will be generated. In this study, a new method for reducing the data traffic in a designed IoT network is proposed and the data traffic on the network is reduced by preventing the transfer of useless / repetitive data in the network environment. A four layered (sensing layer, internet/network layer, transport layer and application layer) IoT architecture has been proposed by Çavdar and Öztürk in 2018. In the sensing layer, it is aimed to prevent unnecessary and repeated data from being transferred in the network environment by analyzing and eliminating the data. In addition, preventing the transmission of unnecessary and repetitive data to the network environment will bring many advantages such as storage, data traffic speed and storage cost.

Anahtar Kelimeler

Internet of Things, Big Data, Sensor Technology, Data Transmission

Kaynakça

• Al-Fuqaha, A., Guizani, M., Mohammadi, M., Aledhari M., and Ayyash, M. (2015). “Internet of Things: A Survey on Enabling Technologies, Protocols, and Applications,” IEEE Communications Surveys & Tutorials, Vol. 17, No. 4, pp. 2347-2376.
• Bozdoğan, Z . (2015) “Nesnelerin İnterneti için Mimari Tasarımı”, MSc Thesis, University of Düzce, Düzce, Turkey.
• Çavdar, T. and Öztürk, E. (2018). “A Novel Architecture Design for Internet of Things,” Sakarya University Journal of Science, Vol 22, No. 1, pp. 39-48.https://oss.adm.ntu.edu.sg/ctan046/the-trojan-room-coffee-pot/. [Accessed: 9th November 2017].
• International Telecommunication Union (ITU), 2012. “Global Information Infrastructure, Internet Protocol Aspects and Next-Generation Networks,”
• Öztürk, E., Kakız, M. T., and Çavdar, T. (2017) “The Economical Importance and Contribution of Information Technologies to Rural and Regional Development: An Empirical Analysis,” Proc., In 4th International Regional Development Conference, IRDC, Tunceli, Turkey, pp. 684-690.
• Öztürk, E. (2018). Proposing A Novel General Purposed Architectural Model For The Internet Of Things, MSc Thesis, Karadeniz Technical University, Trabzon, Turkey.
• Romkey, J. (2017) “Toast of the IoT: The 1990 Interop Internet Toaster,” IEEE Consumer Electronics Magazine, Vol. 6, No. 1, pp. 116-119.
• Stafford-Fraser, Q. (2001) “On site: The life and times of the first Web Cam.” Communications of the ACM, Vol 44, No. 7, pp. 25-26.