Structural and Magnetic Study of Fe-15,83%Mn-2,18%V and Fe18,50%Mn-2,27%Cu Alloys

Year 2019, Volume: 11 Issue: 1, 1 - 6, 31.01.2019

Nermin Kahveci Yağcı Hasan İnaç

https://doi.org/10.29137/umagd.414647

Cited By: 1

Abstract

In
this study, the microstructure and magnetic properties of martensite
transformation induced were investigated in Fe based alloys (Fe-15,83%Mn-2,18%V
ve Fe-18,50%Mn-2,27%Cu alloys). Micro structures were studied with Scanning
Electron Microscope. The effect of the
adding V and Cu in Fe-Mn alloy on the magnetic properties has been investigated
by Mössbauer spectroscopy technique respectively. It was investigated that the
adding of V and Cu  to Fe-Mn alloy
reveals the ferromagnetic and paramagnetic properties of alloy respectively. The
other result of this study is the rate of Mn amount in Fe-Mn-X alloy. If the Mn
rate in the Fe-Mn-X alloy is 18% or more, no α-martensitic transformation have
been observed. Thus, this study showed that the additional atom has great
importance on changing the magnetic properties of alloys.

Keywords

Phase transformation, Magnetic properties, Mössbauer spectroscopy, Scanning electron microscope

References

• Askeland, D.R., (2003). The Science And Engineering of Materials (4th ed.). Thomson Learning Inc., California.
• Cotes, S.M., Cabrera, A.F., Damonte, L.C., Mercader, R.C.,& Desimoni, J. (2002). Phase transformations in Fe-Mn alloys induced by Ball Milling. Hyperfine Interactions 141/142 409-414. doi:10.1023/A:1021204909505.
• Cotes, S.M., Cabrera, A.F., Damonte, L.C., Mercader, R.C., & Desimoni, J.(2002). Magnetic properties of ball-milled Fe–Mn alloys. Physica B 320 274–277. doi:10.1016/S0921-4526(02)00711-1.
• Cotes, S.M., Guillermet, A.F., & Sade, M. (2004). Fcc/Hcp Martensitic transformation in the Fe-Mn system: Part II. Driving force and thermodynamics of the nucleation process. Metallurgical and Materials Transactions A, 23 83-91. doi:10.1007/s11661-004-0111-y.
• Jun, J.H., Kong, D.K., & Choi, C.S. (1998). The influence of Co on damping capacity of Fe–Mn–Co alloys. Materials Research Bulletin Vol. 33, No. 10 1419–1425. doi:10.1016/S0025-5408(98)00145-7.
• Kajiwara, S. (1984). Continuous observation of isothermal martensite formation in Fe-Ni-Mn alloys. Acta Metallurgica, 32 407-413. doi:10.1016/0001-6160(84)90114-7.
• Marinelli, P., Fernandez Guillernet, A., & Sade, M. (2004). The enthalpy change of the hcp → fcc martensitic transformation in Fe–Mn–Co alloys: composition dependence and thermal cycling effects. Materials Science and Engineering A 373 1–9. doi:10.1016/j.msea.2003.05.006.
• Nishiyama, Z. (1978). Martensitic transformations, Academic Press, London.
• Porter, D.A., Eeasterling, K.E., & Sherif, M.Y. (2009). Phase Transformations in Metals and Alloys (3.ed.). CRC Press, London, New York.
• Sarı, U., Güler, E., Kırındı, T., & Dikici, M.(2009). Characterization of martensite in Fe-25%Ni-15%Co-5%Mo alloy. Journal of Physics and Chemistry of Solid, 70 1226-1229. doi:10.1016/j.jpcs.2009.06.013.
• Sarı, U., Kırındı, T., Yüksel, M., & Ağan, S. (2009). Influence of Mo and Co on the magnetic properties and martensitic transformation characteristics of a Fe-Mn alloy. Journal of Alloys and Compounds 476 160–163. doi:10.1016/j.jallcom.2008.09.047.
• Sarı, U., & Kırındı, T. (2011). Effect of Mn content on the austenite-martensite phases and magnetic properties in Fe-Mn-Co alloys. Mateterials Chemistry and Physics, 130(2011)738-742. doi:10.1016/j.matchemphys.2011.07.063.
• Sumiyama, B.K., Kadono, M., & Nakamura, Y. (1981). Metastable bcc Fe-Mn alloys produced by rf sputtering. Transaction of the Japan Institute of Metals,Vol.22,No.10 686-690. doi:10.2320/matertrans1960.22.686.