Investigation of the Effect of Sintering Temperatures on the Production of Porous NiTi Alloy by Loosen Sintering Method

Yıl 2023, Cilt: 15 Sayı: 1, 16 - 23, 31.01.2023

Naci Arda Tanış , Bulent Bostan

https://doi.org/10.29137/umagd.1190335

Öz

This article aims to produce NiTi shape memory alloys, which show superelasticity and shape memory effect, as well as good biocompatibility and corrosion properties, in open and porous sizes ranging from 100-500 μm, which are required for use as implants. This structure of pores is necessary to allow tissue growth and fluid flow inside the implants. Many powder metallurgy methods have been used in producing porous NiTi shape memory alloys. However, the packaging pressure used in these methods has not successfully created the desired pore distribution, shape, and size. The methods by which it can be produced are costly in terms of cost. In the study, production was carried out by sintering the powder mixture poured into molds without pressure with the help of binder polymers. This sintering process was carried out in an argon atmosphere for 1 hour at temperatures 1050, 1125, and 1200 °C. The study shows that pressureless loosen sintering can produce porous NiTi alloys, which is the more straightforward method. The pore distribution and proportions were examined. Homogeneous distribution and pores in desired sizes are created. It has also been determined that the binder polymer has a space-retaining effect. It was determined at which temperature the alloy sintered at different temperatures contained the desired B2 austenite phase for superelasticity. Austenite start and finish temperatures were determined for the alloy produced at each sintering temperature. As a result of this research, it was determined which phase was denser at which temperature, and the phase transformation temperatures were found. The exact temperature measurements can be calculated by changing the sintering time parameter. In addition, the change in phase transformation temperatures can be measured by heat treatment after sintering. Porous NiTi alloys can be used as dental and medical implants thanks to their excellent biocompatibility and corrosion resistance. This method will decrease production costs, and more people will have access to this material. In general, the mechanism of sintering methods is joining the points in contact with the packaging pressure by necking. In this study, the combination of the grains with the polymer without packaging pressure with the thermal expansion mechanism reveals the originality of the study.

Anahtar Kelimeler

NiTi, Shape Memory, Powder Metallurgy

Kaynakça

• H. Z. Lu et al., “Microstructure, shape memory properties, and in vitro biocompatibility of porous NiTi scaffolds fabricated via selective laser melting,” Journal of Materials Research and Technology, vol. 15, pp. 6797–6812, 2021, doi: https://doi.org/10.1016/j.jmrt.2021.11.112.
• B. Yuan, M. Zhu, and J. Chung, “Biomedical Porous Shape Memory Alloys for Hard-Tissue Replacement Materials,” Materials, vol. 11, p. 1716, Jul. 2018, doi: 10.3390/ma11091716.
• T. LAI et al., “Preparation and characterization of porous NiTi alloys synthesized by microwave sintering using Mg space holder,” Transactions of Nonferrous Metals Society of China, vol. 31, no. 2, pp. 485–498, 2021, doi: https://doi.org/10.1016/S1003-6326(21)65511-5.
• D. S. Li, X. P. Zhang, Z. P. Xiong, and Y.-W. Mai, “Lightweight NiTi shape memory alloy based composites with high damping capacity and high strength,” J Alloys Compd, vol. 490, no. 1–2, 2010, doi: 10.1016/j.jallcom.2009.10.025.
• A. Bansiddhi, T. D. Sargeant, S. I. Stupp, and D. C. Dunand, “Porous NiTi for bone implants: A review,” Acta Biomater, vol. 4, no. 4, pp. 773–782, Jul. 2008, doi: 10.1016/J.ACTBIO.2008.02.009.
• J. L. Xu, X. F. Jin, J. M. Luo, and Z. C. Zhong, “Fabrication and properties of porous NiTi alloys by microwave sintering for biomedical applications,” Mater Lett, vol. 124, pp. 110–112, 2014, doi: https://doi.org/10.1016/j.matlet.2014.03.088.
• G. Özerim, G. Anlaş, and Z. Moumni, “The effect of heat treatment on pseudoelastic behavior of spark plasma sintered NiTi,” Mater Today Commun, vol. 31, p. 103819, 2022, doi: https://doi.org/10.1016/j.mtcomm.2022.103819.
• S. Wisutmethangoon, N. Denmud, and L. Sikong, “Characteristics and compressive properties of porous NiTi alloy synthesized by SHS technique,” Materials Science and Engineering: A, vol. 515, no. 1, pp. 93–97, 2009, doi: https://doi.org/10.1016/j.msea.2009.02.055.
• M. Farvizi, M. K. Javan, M. R. Akbarpour, and H. S. Kim, “Fabrication of NiTi and NiTi-nano Al2O3 composites by powder metallurgy methods: Comparison of hot isostatic pressing and spark plasma sintering techniques,” Ceram Int, vol. 44, no. 13, pp. 15981–15988, 2018, doi: https://doi.org/10.1016/j.ceramint.2018.06.025.
• M. Zhao et al., “Superelastic behaviors of additively manufactured porous NiTi shape memory alloys designed with Menger sponge-like fractal structures,” Mater Des, vol. 200, p. 109448, 2021, doi: https://doi.org/10.1016/j.matdes.2021.109448.
• X. Zhao, H. Sun, L. Lan, J. Huang, H. Zhang, and Y. Wang, “Pore structures of high-porosity NiTi alloys made from elemental powders with NaCl temporary space-holders,” Mater Lett, vol. 63, no. 28, pp. 2402–2404, Nov. 2009, doi: 10.1016/J.MATLET.2009.07.069.
• A. Bansiddhi and D. C. Dunand, “Shape-memory NiTi foams produced by solid-state replication with NaF,” Intermetallics (Barking), vol. 15, no. 12, pp. 1612–1622, Dec. 2007, doi: 10.1016/J.INTERMET.2007.06.013.
• L. Zhang, Y. Q. Zhang, Y. H. Jiang, and R. Zhou, “Superelastic behaviors of biomedical porous NiTi alloy with high porosity and large pore size prepared by spark plasma sintering,” J Alloys Compd, vol. 644, pp. 513–522, Sep. 2015, doi: 10.1016/J.JALLCOM.2015.05.063.
• M. H. Ismail, R. Goodall, H. A. Davies, and I. Todd, “Porous NiTi alloy by metal injection moulding/sintering of elemental powders: Effect of sintering temperature,” Mater Lett, vol. 70, pp. 142–145, 2012, doi: https://doi.org/10.1016/j.matlet.2011.12.008.
• A. R. Yost, D. Erdeniz, A. E. P. y Puente, and D. C. Dunand, “Effect of diffusion distance on evolution of Kirkendall pores in titanium-coated nickel wires,” Intermetallics (Barking), 2019.
• A. E. Paz y Puente and D. C. Dunand, “Synthesis of NiTi microtubes via the Kirkendall effect during interdiffusion of Ti-coated Ni wires,” Intermetallics (Barking), vol. 92, pp. 42–48, 2018, doi: https://doi.org/10.1016/j.intermet.2017.09.010.