QUESTIONING THE PRODUCTION SUCCESS IN THE CONSTRUCTION INDUSTRY: INNOVATION, AUTOMATION, DIGITAL TRANSFORMATION

Yıl 2022, , 238 - 257, 12.01.2022

Seçkin Koralay , Fahriye Halıcıoğlu

https://doi.org/10.51551/verimlilik.975619

Cited By: 1

Öz

Purpose: The production success of an industry is related to how efficiently it can transform its resources and add value to its participants in terms of cost, time, quality, and scope. Despite its global importance and scale, the construction industry underperforms in productivity compared to general averages. This study questions the reasons for this issue regarding the peculiarities of the industry. In this context; how successfully the construction industry can carry out its production compared to other industries, what kind of innovative developments have been experienced in the last century to increase the level of success, and why these developments are insufficient to provide solutions at the desired level are examined.

Methodology: A critical examination is conducted in this study.

Findings: Complex and unique nature of the construction industry results in a decentralized and fragmented production mechanism and also hinders the development and adaptation of innovative concepts such as robotics and digitalization. In order to increase the level of success, innovative developments specific to the construction industry should be handled with a radical and holistic approach.

Originality: The study contributes to the construction innovation literature.

Anahtar Kelimeler

Construction Industry, Innovation, Technology, Automation, Digital Transformation

YAPI ENDÜSTRİSİNDEKİ ÜRETİM BAŞARISININ SORGULANMASI: YENİLEŞİM, OTOMASYON, DİJİTAL DÖNÜŞÜM

Öz

Amaç: Bir endüstrinin üretim başarısı, kaynaklarını ne kadar etkin bir biçimde dönüştürebildiği ve katılımcılarına maliyet, zaman, kalite ve kapsam gibi yönlerden ne kadar değer katabildiği ile ilişkilidir. Yapı endüstrisi, küresel düzeydeki önemine ve büyüklüğüne rağmen genel üretkenlik ortalamalarının altında kalmaktadır. Çalışmanın sorgu alanı bu durumun sebeplerini endüstrinin özgün özellikleri üzerinden değerlendirmektir. Bu kapsamda; yapı endüstrisinin üretimini diğer endüstrilere kıyasla ne kadar başarılı bir biçimde yürütebildiği, başarım düzeyini yükseltmeye yönelik son yüzyılda ne tür yenilikçi gelişmelerin yaşandığı ve bu gelişmelerin çözüm sağlamakta neden yetersiz kaldığı irdelenmektedir.

Yöntem: Çalışmada eleştirel bir inceleme yapılmaktadır.

Bulgular: Yapım sektörünün karmaşık ve özgün doğasından kaynaklı dağınık ve parçalı üretim mekanizması, robotik ve dijitalleşme gibi yenilikçi konseptlerin geliştirilmesini ve uyarlanmasını güçleştirmektedir. Başarım düzeyini yükseltmek için inşaat sektörüne özgü yenilikçi gelişmelerin radikal ve bütüncül bir yaklaşımla ele alınması gerekmektedir.

Özgünlük: Çalışma inşaat endüstrisi alanında inovasyon literatürüne katkıda bulunmaktadır.

Anahtar Kelimeler

Yapı Endüstrisi, Yenileşim (İnovasyon), Teknoloji, Otomasyon, Dijital Dönüşüm

Kaynakça

• Abd Rashid, M.N., Abdullah, M.R., Ismail, D. ve Saberi, M.H. (2019). “Automation and Robotics in Industrialized Building System (IBS): The Potential Criteria for Measurement”, International Journal of Academic Research in Business and Social Sciences, 9(7), 1020-1034.
• Abrishami, S. (2016). “Conceptual Design Automation: Consideration of Building Materials Impact at Early Stages of AEC Design”, Advances in Civil, Architectural, Structural and Constructional Engineering, Editörler: Kim, D. K., Jung, J., & Seo, J., Proceedings of the International Conference on Civil, Architectural, Structural and Constructional Engineering, Dong-A University, Busan, South Korea, August 21-23, 2015, CRC Press, London, UK, 263-268.
• Alfares, M. ve Seireg, A. (1996). “An Integrated System for Computer-Aided Design and Construction of Reinforced Concrete Buildings Using Modular Forms”, Automation in Construction, 5(4), 323-341.
• Alim, M.A., Tao, Z., Hassan, M.K., Rahman, A., Wang, B., Zhang, C. ve Samali, B. (2019). “Is It Time to Embrace Building İntegrated Photovoltaics? A Review With Particular Focus on Australia”, Solar Energy, 188, 1118-1133.
• Anton, A., Reiter, L., Wangler, T., Frangez, V., Flatt, R.J. ve Dillenburger, B. (2021). “A 3D Concrete Printing Prefabrication Platform for Bespoke Columns”, Automation in Construction, 122, 103467.
• Aparicio, J., Lovell, C.K. ve Pastor, J.T. (Ed.), (2016). “Advances in Efficiency and Productivity”, Cham: Springer International Publishing.
• Apis Cor (2018). “Company presentation: Technical report”, http://apis-cor.com/files/ApisCor_presentation.pdf (Erişim Tarihi: 01.12.2018).
• Attia, S., Lioure, R. ve Declaude, Q. (2020). “Future Trends and Main Concepts of Adaptive Facade Systems”, Energy Science & Engineering, 8(9), 3255-3272.
• Austin, S., Newton, A., Steele, J. ve Waskett, P. (2002). “Modelling and Managing Project Complexity”, International Journal of Project Management, 20(3), 191-198.
• Aziz, R.F. ve Hafez, S.M. (2013). “Applying Lean Thinking in Construction and Performance Improvement”, Alexandria Engineering Journal, 52(4), 679-695.
• Babič, N.Č., Podbreznik, P. ve Rebolj, D. (2010). “Integrating Resource Production and Construction Using BIM”, Automation in Construction, 19(5), 539-543.
• Balaguer, C. ve Abderrahim, M. (2008). “Trends in Robotics and Automation in Construction”, Robotics and Automation in Construction, https://www.intechopen.com, (Erişim Tarihi: 01.12.2018).
• Baldwin, J. (1997). “BuckyWorks: Buckminster Fuller's Ideas for Today”, John Wiley & Sons, New York. Ballard, G. ve Howell, G. (1998). “What Kind of Production is Construction”, Proc. 6th Annual Conf. Int’l. Group for Lean Construction, 13-15.
• Bedarf, P., Dutto, A., Zanini, M. ve Dillenburger, B. (2021). “Foam 3D Printing for Construction: A Review of Applications, Materials, and Processes”, Automation in Construction, 130, 103861.
• Bello, S.A., Oyedele, L.O., Akinade, O.O., Bilal, M., Davila Delgado, J.M., Akanbi, L.A., Ajayi, A.O. and Owolabi, H.A., (2021). Cloud Computing in Construction Industry: Use Cases, Benefits and Challenges”, Automation in Construction, 122, 103441.
• Bergdoll, B., Christensen, P., Christensen, P.H. ve Oshima, K. (2008). “Home Delivery: Fabricating the Modern Dwelling”, The Museum of Modern Art, New York.
• Berman, B. (2012). “3-D Printing: The New Industrial Revolution”, Business Horizons, 55(2), 155-162.
• Bertelsen, S., Henrich, G., Koskela, L. ve Rooke, J. (2007). “Construction Physics”, 15th Annual Conference of the International Group for Lean Construction IGLC, 15 Temmuz 2007, Michigan State University, East Lansing. Bertelsen, S. ve Sacks, R. (2007). “Towards a New Understanding of the Construction Industry and the Nature of its Production”, 15th Conference of the International Group for Lean Construction,. Michigan State Unviversity, East Lansing, Michigan, 46-56.
• Bertram, N., Fuchs, S., Mischke, J., Palter, R., Strube, G. ve Woetzel, J. (2019). “Modular Construction: From Projects to Products”, Capital Projects & Infrastructure, McKinsey & Company. 1-34.
• Björnfot, A. ve Sardén, Y. (2006). “Prefabrication: A Lean Strategy for Value Generation in Construction”, Annual Conference of the International Group for Lean Construction, Catholic University of Chile, School of Engineering, 25-27 July, 265-277.
• Bock, T. (2015). “The Future of Construction Automation: Technological Disruption and the Upcoming Ubiquity of Robotics”, Automation in Construction, 59, 113-121.
• Bock, T. ve Linner, T. (2015a). “Robot Oriented Design”, Cambridge University Press, New York. Bock, T. ve Linner, T. (2015b). “Robotic Industrialization”, Cambridge University Press, New York. Bock, T. ve Linner, T. (2016a). “Construction Robots (3): Elementary Technologies and Single-Task Construction Robots”, Cambridge University Press, New York.
• Bock, T. ve Linner, T. (2016b). “Site Automation”, Cambridge University Press, New York. Bogue, R. (2013). “3D Printing: The Dawn of a New Era in Manufacturing?”, Assembly Automation, 33(4), 307-311.
• Bogue, R. (2018). “What are the Prospects for Robots in the Construction Industry?”, Industrial Robot, 45 (1), 1-6.
• Bokor, O., Florez, L., Osborne, A. ve Gledson, B.J. (2019). “Overview of Construction Simulation Approaches to Model Construction Processes”, Organization, Technology & Management in Construction: An International Journal, 11(1), 1853-1861.
• Buchanan, C. ve Gardner, L. (2019). “Metal 3D Printing in Construction: A Review of Methods, Research, Applications, Opportunities and Challenges”, Engineering Structures, 180, 332-348.
• Bulbul, T., Anumba, C.J. ve Messner, J. (2009). “A System of Systems Approach to Intelligent Construction Systems”, Computing in Civil Engineering, 2(4), 22-32.
• Cai, S., Ma, Z., Skibniewski, M.J. ve Bao, S. (2019). “Construction Automation and Robotics for High-Rise Buildings Over the Past Decades: A Comprehensive Review”, Advanced Engineering Informatics, 42, 100989. Campbell, I., Bourell, D. ve Gibson, I. (2012). “Additive Manufacturing: Rapid Prototyping Comes of Age”, Rapid Prototyping Journal, 18(4), 255-258.
• Caneparo, L. (2014). “Digital Fabrication in Architecture, Engineering and Construction”, Editor: Cerrato, A., Springer, Dordrecht, Netherlands.
• Cesaretti, G., Dini, E., De Kestelier, X., Colla, V. ve Pambaguian, L. (2014). “Building Components for an Outpost on the Lunar Soil by Means of a Novel 3D Printing Technology”, Acta Astronautica, 93, 430-450.
• Castro-Lacouture, D. (2009). “Construction Automation”, Springer Handbook of Automation, Editor: Nof S. Y., Berlin Heidelberg: Springer, 1063-1078.
• Chea, C.P., Bai, Y., Pan, X., Arashpour, M., ve Xie, Y. (2020). “An Integrated Review of Automation and Robotic Technologies for Structural Prefabrication and Construction”, Transportation Safety and Environment, 2(2), 81-96.
• Christensen C.M. (1999). “Innovation and Change: The Evolution of Innovation”, The Technology Management Handboo, Editor: Dorf, R.C., CRC Press & IEEE Press, Florida, USA.
• Chu, M., Matthews, J. ve Love, P.E. (2018). “Integrating Mobile Building Information Modelling and Augmented Reality Systems: An Experimental Study”, Automation in Construction, 85, 305-316.
• Coelli, T.J., Rao, D.S.P., O'Donnell, C.J. ve Battese, G.E. (2005). “An Introduction to Efficiency and Productivity Analysis”, Springer Science & Business Media, Berlin Heidelberg.
• Cousineau, L. ve Miura, N. (1998). “Construction Robots: The Search for New Building Technology in Japan”, ASCE Publications, Reston, Virginia.
• Cox, R. ve Goodman, C.S. (1956). “Marketing of Housebuilding Materials”, Journal of Marketing, 21(1), 36-61. Davtalab, O., Kazemian, A. ve Khoshnevis, B. (2018). “Perspectives on a BIM-Integrated Software Platform for Robotic Construction Through Contour Crafting”, Automation in Construction, 89, 13-23.
• De Beer, N. (2006). “Advances in Three Dimensional Printing-State of the Art and Future Perspectives”, Journal for New Generation Sciences, 4(1), 21-49.
• De Soto, B.G., Agustí-Juan, I., Hunhevicz, J., Joss, S., Graser, K., Habert, G. ve Adey, B.T. (2018). “Productivity of Digital Fabrication in Construction: Cost and Time Analysis of a Robotically Built Wall”, Automation in Construction, 92, 297-311.
• De Soto, B.G. ve Skibniewski, M.J. (2020). “Future of Robotics and Automation in Construction”, Construction 4.0: An Innovation Platform for the Built Environment, Editors: Sawhney, A., Riley, M., & Irizarry, J., 1st Edition, Routledge, London, 289-306.
• Delgado, J.M.D., Oyedele, L., Ajayi, A., Akanbi, L., Akinade, O., Bilal, M. ve Owolabi, H. (2019). “Robotics and Automated Systems in Construction: Understanding Industry-Specific Challenges for Adoption”, Journal of Building Engineering, 26, 100868.
• Dubois, A. ve Gadde, L.E. (2002). “The Construction Industry as a Loosely Coupled System: Implications for Productivity and Innovation”, Construction Management & Economics, 20(7), 621-631.
• Dvir, D., Lipovetsky, S., Shenhar, A. ve Tishler, A. (1998). “In Search of Project Classification: A Non-Universal Approach to Project Success Factors”, Research Policy, 27(9), 915-935.
• Eastman, C.M., Eastman, C., Teicholz, P. ve Sacks, R. (2011). “BIM Handbook: A Guide to Building Information Modeling for Owners, Managers, Designers, Engineers and Contractors”, John Wiley & Sons, New Jersey. Egan J. (1994). “Rethinking Construction”, http://constructingexcellence.org.uk (Erişim Tarihi: 01.12.2018).
• El-Sayegh, S., Romdhane, L. ve Manjikian, S. (2020). “A Critical Review of 3D Printing in Construction: Benefits, Challenges, and Risks”, Archives of Civil and Mechanical Engineering, 20(2), 1-25.
• Fried, H.O., Lovell, C.K. ve Schmidt, S.S. (2008). “The Measurement of Productive Efficiency and Productivity Growth”, Oxford University Press, Oxford.
• Fuller, R.B. (1999). “Your Private Sky: R. Buckminster Fuller: The Art of Design Science”, Springer Science & Business Media, Berlin, Heidelberg.
• Gerling, V. ve Von Mammen, S. (2016). “Robotics for Self-Organised Construction”, 2016 IEEE 1st International Workshops on Foundations and Applications of Self Systems (FASW), 12-16 September, Augsburg, Germany, IEEE, 162-167.
• Gharehbaghi, K., Mulowayi, E., Rahmani, F. ve Paterno, D. (2021). “Case Studies in Modular Prefabrication: Comparative Analysis and Discoveries”, Journal of Physics: Conference Series, 1780, 1, 012009.
• Gibson, I. Stucker, B. ve Rosen, D. (2014). “Additive Manufacturing Technologies”, Springer, New York. Gidado, K.I. (1996). “Project Complexity: The Focal Point of Construction Production Planning”, Construction Management & Economics, 14(3), 213-225.
• Gramazio, F. ve Kohler, M. (Eds.), (2014). “Made by Robots: Challenging Architecture at a Larger Scale”, John Wiley & Sons.
• Gupta, A.K. ve Arora, S.K. (2009). “Industrial Automation and Robotics”, Laxmi Publications, New Delhi. Hao, J.L., Cheng, B., Lu, W., Xu, J., Wang, J., Bu, W. ve Guo, Z. (2020). “Carbon Emission Reduction in Prefabrication Construction during Materialization Stage: A BIM-Based Life-Cycle Assessment Approach”, Science of the Total Environment, 723, 137870.
• Halicioglu, F.H. ve Koralay, S. (2019). “Innovative Approaches to Automated Construction: Recent Advances and Future Visions on Three dimensional Printing”, Proceedings of CIB (International Council for Research and Innovation in Building and Construction) World Building Congress (CIB WBC 2019), CIB World Building Congress 2019: Constructing Smart Cities, 17-21 June, The Hong Kong Polytechnic University, Hong Kong, China.
• Halicioglu, F.H. ve Koralay, S. (2020). “Applicability Analysis of Additive Manufacturing Methods in Construction Projects”, Gradevinar, 72(4), 335-349.
• HM Government (2013). “Construction 2025: Industrial Strategy: Government and Industry in Partnership”, https://assets.publishing.service.gov.uk/government/uploads/system/uploads/attachment_data/file/210099/bis-13-955-construction-2025-industrial-strategy.pdf (Erişim Tarihi: 01.12.2018).
• Holt, C., Edwards, L., Keyte, L., Moghaddam, F. ve Townsend, B. (2019). “Construction 3D Printing”, Chapter 17, 3D Concrete Printing Technology, Editors: Sanjayan, J.G., Ali Nazari, A. ve Nematollahi, B., Butterworth-Heinemann, 349-370.
• Howard, H.C., Levitt, R., Paulson, B.C., Pohl, J.G. ve Tatum, C.B. (1989). “Computer Integration: Reducing Fragmentation in AEC Industry”, Journal of Computing in Civil Engineering, 3(1), 18-32.
• Höök, M. ve Stehn, L. (2008). “Applicability of Lean Principles and Practices in Industrialized Housing Production”, Construction Management and Economics, 26(10), 1091-1100.
• IAAC, (2018). “Minibuilders”, Institute for Advanced Architecture of Catalonia, http://robots.iaac.net, (Erişim Tarihi: 01.12.2018).
• IFR, International Federation of Robotics (2012). “History of Industrial Robots”, https://ifr.org/robot-history (Erişim Tarihi: 01.12.2018).
• IFR, International Federation of Robotics (2018). “Executive Summary World Robotics 2018 Industrial Robots”, https://ifr.org/downloads/press2018/Executive_Summary_WR_2018_Industrial_Robots.pdf, (Erişim Tarihi: 01.09.2021).
• IFR, International Federation of Robotics (2021). “Executive Summary World Robotics 2021 Industrial Robots”, https://ifr.org/img/worldrobotics/Executive_Summary_WR_Industrial_Robots_2021.pdf (Erişim Tarihi: 01.09.2021).
• Imperiale, A. (2012). “An American Wartime Dream: The Packaged House System of Konrad Wachsmann and Walter Gropius”, Offsite: Theory and practice of Architectural Production, Association of Collegiate Schools of Architecture (ACSA) 2012 Fall Conference Proceedings, 39-43.
• Inhabitat, (2018). “Get a Free Vintage Prefab”, https://inhabitat.com/get-a-free-vintage-prefab-deadline-april-12/ (Erişim Tarihi: 01.12.2018).
• Irawan, J., De Kestelier, X., Argyros, N., Lewis, B. ve Gregson, S. (2019). “A Reconfigurable Modular Swarm Robotic System for ISRU (In-Situ Resource Utilisation) Autonomous 3D Printing in Extreme Environments”, Proceedings of the Design Modelling Symposium, Berlin, In: Gengnagel C., Baverel O., Burry J., Ramsgaard Thomsen M., Weinzierl S. (eds) Impact: Design With All Senses, Springer, Cham, 685-698.
• Janipha, N.A.I., Ahmad, N. ve Ismail, F. (2015), “Clients’ Involvement in Purchasing Process for Quality Construction Environment”, Procedia-Social and Behavioral Sciences, 168, 30-40.
• Jäger, J., Schöllhammer, O., Lickefett, M. ve Bauernhansl, T. (2016). “Advanced Complexity Management Strategic Recommendations of Handling the “Industrie 4.0” Complexity for Small and Medium Enterprises”, Procedia CIRP, 57, 116-121.
• Jensen, T.C., Bekdik, B. ve Thuesen, C. (2014). “Understanding Complex Construction Systems through Modularity”, Proceedings of the 7th World Conference on Mass Customization, Personalization, and Co-Creation (MCPC 2014), Aalborg, Denmark, Şubat 4-7, 541-555.
• Jung, Y. ve Gibson, G.E. (1999). “Planning for Computer Integrated Construction”, Journal of Computing in Civil Engineering, 13(4), 217-225.
• Kasperzyk, C., Kim, M.K. ve Brilakis, I. (2017). “Automated Re-Prefabrication System for Buildings Using Robotics”, Automation in Construction, 83, 184-195.
• Kensek, K. ve Noble, D. (2014). “Building Information Modeling: BIM in Current and Future Practice”, John Wiley & Sons.
• Kieran, S. ve Timberlake, J. (2004). “Refabricating Architecture: How Manufacturing Methodologies are Poised to Transform Building Construction”, McGraw-Hill, New York.
• Kietzmann, J., Pitt, L. ve Berthon, P. (2015). “Disruptions, Decisions, and Destinations: Enter the Age of 3-D Printing and Additive Manufacturing”, Business Horizons, 58(2), 209-215.
• Khoshnevis, B. (1996). “U.S. Patent No. 5,529,471”, Washington, DC: U.S. Patent and Trademark Office. Khoshnevis, B. (2004). “Automated Construction by Contour Crafting-Related Robotics and Information Technologies”, Automation in Construction, 13(1), 5-19.
• Kim, T., Lee, D., Lim, H., Lee, U.K., Cho, H. ve Cho, K. (2021). “Exploring Research Trends and Network Characteristics in Construction Automation and Robotics Based on Keyword Network Analysis”, Journal of Asian Architecture and Building Engineering, 20(4), 442-457.
• Koskela, L. (1992). “Application of the New Production Philosophy to Construction (72)”, Stanford University, Stanford, CA.
• Koskela, L., Howell, G., Ballard, G. ve Tommelein, I. (2002). “The Foundations of Lean Construction”, Design and Construction: Building in Value, 211-226.
• Larsen, M.S.S., Lindhard, S.M., Brunoe, T.D., Nielsen, K. ve Larsen, J.K. (2019). “Mass Customization in the House Building Industry: Literature Review and Research Directions”, Frontiers in Built Environment, 5, 115. Latham S.M. (1994). “Constructing the Team”, Final Report, July 1994, https://constructingexcellence.org.uk/wp-content/uploads/2014/10/Constructing-the-team-The-Latham-Report.pdf (Erişim Tarihi: 01.12.2018).
• Leviäkangas, P., Paik, S. M. ve Moon, S. (2017). “Keeping up with the Pace of Digitization: The Case of the Australian Construction Industry”, Technology in Society, 50, 33-43.
• Li, Z. ve He, D. (2013). “Discussion of a Method of Collaborative Construction Project Information Management Based on BIM”, ICCREM 2013: Construction and Operation in the Context of Sustainability, 492-498.
• Lin, Z. (2011). “Nakagin Capsule Tower: Revisiting the Future of the Recent Past”, Journal of Architectural Education, 65(1), 13-32.
• Linner, T. (2013). “Automated and Robotic Construction: Integrated Automated Construction Sites”, Doktora Tezi, Technische Universität München, Münih.
• Liu, J., Li, H., Sun, L., Guo, Z., Harvey, J., Lu, H. ve Jia, M. (2021). “In-Situ Resources for Infrastructure Construction on Mars: A Review”, International Journal of Transportation Science and Technology, DOI: 10.1016/j.ijtst.2021.02.001.
• Lu, W., Chen, K., Xue, F. ve Pan, W. (2018). “Searching for an Optimal Level of Prefabrication in Construction: An Analytical Framework”, Journal of Cleaner Production, 201, 236-245.
• Lu, W., Lee, W.M., Xue, F. ve Xu, J. (2021). “Revisiting the Effects of Prefabrication on Construction Waste Minimization: A Quantitative Study Using Bigger Data”, Resources, Conservation and Recycling, 170, 105579. Luo, L., He, Q., Jaselskis, E.J. ve Xie, J. (2017). “Construction Project Complexity: Research Trends and Implications”, Journal of Construction Engineering and Management, 143(7), 04017019.
• Maeda, J. (1994). “Development and Application of the SMART System”, Automation and Robotics in Construction XI, 457-464.
• Maurer, M. (2017). “Complexity Management in Engineering Design–a Primer”, https://www.springer.com (Erişim Tarihi: 01.12.2018).
• Mechtcherine, V., Nerella, V.N., Will, F., Näther, M., Otto, J. ve Krause, M. (2019). “Large-Scale Digital Concrete Construction–CONPrint3D Concept for On-Site, Monolithic 3D-Printing”, Automation in Construction, 107, 102933, 1-16.
• Memari, A.M., Huelman, P.H., Iulo, L.D., Laquatra, J., Martin, C., McCoy, A., Nahmens, I., ve Williamson, T. (2014). “Residential building construction: State-of-the-art review”, Journal of Architectural Engineering, 20(4), [B4014005], 1-38.
• MGI, McKinsey Global Institute (2015). “Digital America: A Tale of the Haves and Have-Mores”, Industry Report, December 2015, https://www.mckinsey.com/~/media/mckinsey/industries/technology%20media%20and%20telecommunications/high%20tech/our%20insights/digital%20america%20a%20tale%20of%20the%20haves%20and%20have%20mores/digital%20america%20full%20report%20december%202015.pdf (Erişim Tarihi: 01.12.2018).
• MGI, McKinsey Global Institute (2017). “Reinventing Construction: A Route to Higher Productivity”, Construction Industry Report, February 2017, https://www.mckinsey.com/~/media/mckinsey/business%20functions/operations/our%20insights/reinventing%20construction%20through%20a%20productivity%20revolution/mgi-reinventing-construction-a-route-to-higher-productivity-full-report.pdf (Erişim Tarihi: 01.12.2018).
• Mostafa, S., Kim, K.P., Tam, V.W.Y. ve Rahnamayiezekavat, P. (2020). “Exploring the Status, Benefits, Barriers and Opportunities of Using BIM for Advancing Prefabrication Practice”, International Journal of Construction Management, 20(2), 146-156.
• Nam, C.H. ve Tatum, C.B. (1988). “Major Characteristics of Constructed Products and Resulting Limitations of Construction Technology”, Construction Management and Economics, 6(2), 133-147.
• National Audit Office, (2001). “Modernising Construction”, Report by the comptroller and auditor general, HC 87 Session 2000-2001: 11 January 2001, London, https://webarchive.nationalarchives.gov.uk/ukgwa/20170207052351/https://www.nao.org.uk/wp-content/uploads/2001/01/000187.pdf (Erişim Tarihi: 01.12.2018).
• National Platform fort he Built Environment, (2008). “ICT and Automation (ICTA) Scoping Study Report”, https://www.arup.com/perspectives/publications/research/section/ict-and-automation-icta-scoping-study-research-reports (Erişim Tarihi: 01.12.2018).
• Navon, R. ve Goldschmidt, E. (2003). “Monitoring Labor Inputs: Automated-Data-Collection Model and Enabling Technologies”, Automation in Construction, 12(2), 185-199.
• Ngowi, A.B., Pienaar, E., Talukhaba, A. ve Mbachu, J. (2005). “The Globalisation of the Construction Industry-A Review”, Building and Environment, 40(1), 135-141.
• Oesterreich, T.D. ve Teuteberg, F. (2016). “Understanding the Implications of Digitisation and Automation in the Context of Industry 4.0: A Triangulation Approach and Elements of a Research Agenda for the Construction Industry”, Computers in Industry, 83, 121-139.
• Oh, M., Lee, J., Hong, S.W. ve Jeong, Y. (2015). “Integrated System for BIM-Based Collaborative Design”, Automation in Construction, 58, 196-206.
• Pachon, A.G. (2012). “Construction Site Automation: Guidelines for Analyzing its Feasibility, Benefits and Drawbacks”, Advanced Construction and Building Technology for Society, 38.
• Pan, M., Linner, T., Pan, W., Cheng, H. ve Bock, T. (2018). “A Framework of Indicators for Assessing Construction Automation and Robotics in the Sustainability Context”, Journal of Cleaner Production, 182, 82-95.
• Pegna, J. (1997). “Exploratory Investigation of Solid Freeform Construction”, Automation in Construction, 5(5), 427-437.
• Perkins, I. ve Skitmore, M. (2015). “Three-Dimensional Printing in the Construction Industry: A Review”, International Journal of Construction Management, 15(1), 1-9.
• Sacks, R., Koskela, L., Dave, B.A. ve Owen, R. (2010). “Interaction of Lean and Building Information Modeling in Construction”, Journal of Construction Engineering and Management, 136(9), 968-980.
• Saidi, K.S., Bock, T. ve Georgoulas, C. (2016). “Robotics in Construction”, Springer Handbook of Robotics, Springer, 1493-1519.
• Salem, O., Solomon, J., Genaidy, A. ve Minkarah, I. (2006). “Lean Construction: From Theory to Implementation”, Journal of Management in Engineering, 22(4), 168-175.
• Saurin, T.A., Rooke, J. ve Koskela, L. (2013). “A Complex Systems Theory Perspective of Lean Production”, International Journal of Production Research, 51(19), 5824-5838.
• Sawhney, A., Riley, M. ve Irizarry, J. (2020). “Construction 4.0: Introduction and Overview”, Construction 4.0, 1st Edition, Routledge: London, UK, 3-22.
• Shadid, W.K. (2018). “A Framework for Managing Organizations in Complex Environments”, Construction Management and Economics, 36(4), 182-202.
• Sivaram, P.M., Mande, A.B., Premalatha, M. ve Arunagiri, A. (2020). “Investigation on a Building-Integrated Passive Solar Energy Technology for Air Ventilation, Clean Water and Power”, Energy Conversion and Management, 211, 112739.
• Tay, Y.W.D., Panda, B., Paul, S.C., Noor Mohamed, N.A., Tan, M.J. ve Leong, K.F. (2017). “3D Printing Trends in Building and Construction Industry: A Review”, Virtual and Physical Prototyping, 12(3), 261-276.
• Turner, J.R. (2008). “The Handbook of Project-Based Management: Leading Strategic Change in Organizations”, Third Edition, McGraw-Hill ebooks, https://books.google.com.tr/books?id=Sqqem7PDnMIC&pg=PP1&dq=Handbook+of+Project-Based+Management&hl=tr&sa=X&ved=2ahUKEwj2pKOAqan0AhX9S_EDHeEVCCwQ6AF6BAgFEAI#v=onepage&q=Handbook%20of%20Project-Based%20Management&f=false (Erişim Tarihi: 01.12.2018).
• Van Gassel, F. ve Maas, G. (2008). “Mechanising, Robotising and Automating Construction Processes”, Robotics and Automation in Construction, InTech.
• Volkov, A. ve Shilova, L. (2020). “Cyber-Physical Systems in Construction for Sustainable Urban Development”, 2nd International Symposium on Architecture Research Frontiers and Ecological Environment, E3S Web of Conferences, 143, 01019, EDP Sciences.
• Vrijhoef, R. ve Koskela, L. (2005). “Revisiting the Three Peculiarities of Production in Construction”, Proceedings of 13th International Group for Lean Construction Conference, 19-27.
• William C.I. (1986). “Future Directions for Computerized Construction Research”, Journal of Construction Engineering and Management, 112(3), 326-345.
• Williams, T.M. (1999). “The Need for New Paradigms for Complex Projects”, International Journal of Project Management, 17(5), 269-273.
• Williams, T. (2016). “Identifying Success Factors in Construction Projects: A Case Study”, Project Management Journal, 47(1), 97-112.
• Winch, G. (1989). “The Construction Firm and the Construction Project: A Transaction Cost Approach”, Construction Management and Economics, 7(4), 331-345.
• Winch, G., Usmani, A. ve Edkins, A. (1998). “Towards Total Project Quality: A Gap Analysis Approach”, Construction Management & Economics, 16(2), 193-207.
• Wolfe, T. ve Garfield, L. (1989). “A New Standard for Living: The Lustron House, 1946-1950”, Perspectives in Vernacular Architecture, 3, 51-61.
• Wood, H. ve Ashton, P. (2010). “Modeling Project Complexity”, Proceedings of the 26th Annual ARCOM Conference, 6-8 September, Leeds, UK, Association of Researchers in Construction Management, 1111-1120. Wood, H.L. ve Gidado, K. (2008). “An Overview of Complexity Theory and Its Application to the Construction Industry”, Proceedings of the 24th Annual ARCOM Conference, 1-3 September, Cardiff, UK, Association of Researchers in Construction Management, 677-686.
• Wu, Y. ve Cai, J. (2017). “Research on New-Type Smart City in China Based on Smart Construction Theory”, ICCREM 2017-International Conference on Construction and Real Estate Management, November 10–12, Guangzhou, China, ASCE, 347-354.
• Xia, M., Nematollahi, B. ve Sanjayan, J. (2019). “Printability, Accuracy and Strength of Geopolymer Made Using Powder-Based 3D Printing for Construction Applications”, Automation in Construction, 101, 179-189.
• Yoshida, T. (2006). “A Short History of Construction Robots Research & Development in a Japanese Company”, Proceedings of the International Symposium on Automation and Robotics in Construction, 188-193.
• Yuan, R., Guo, F., Qian, Y., Cheng, B., Li, J., Tang, X. ve Peng, X. (2021). “A System Dynamic Model for Simulating the Potential of Prefabrication on Construction Waste Reduction”, Environmental Science and Pollution Research, 1-12.
• Zhang, J., Long, Y., Lv, S. ve Xiang, Y. (2016). “BIM-Enabled Modular and Industrialized Construction in China”, Procedia Engineering, 145, 1456-1461.
• Zhang, Z., Demir, K.G. ve Gu, G.X. (2019). “Developments in 4D-Printing: A Review on Current Smart Materials, Technologies, and Applications”, International Journal of Smart and Nano Materials, 10(3), 205-224.