How to prepare your manuscript for AAIR

• Before starting to preparation of your manuscript please be sure that you have an "ethical committee permission" certificate (or document) for your work (if it is NEEDED).
• After finished preperation of your manuscript: A similarity check should be done by authors and this report should be uploaded along with the manuscript (similarity rate should NOT be more than %20). Any program (e.g. ithenticate programme) may be used for this purposes. This is vital for ethical and Plagiarism Policy for AAIR.

Research Articles
A research article reports the results of original research and assesses its contribution to the body of knowledge in a given area with the relevant data and findings in an orderly, logical manner. Research articles should be no longer than 15 pages, should have an abstract of 300 words at most, should contain a limit of 60 references, and should have no more than 10 figures and tables combined.
Review Articles
A review article is written to summarize the recent developments, improvements, discoveries, and ideas in various subjects. Review articles should present an unbiased summary of the current understanding of the topic. Review articles should cover subjects that fall within the scope of the journal and are of active, current interest. Review articles should be no longer than 15 pages, should have an abstract of 300 words at most, should contain a limit of 120 references, and should have no more than 12 figures and tables combined. Principal sections should be numbered consecutively (1. Introduction, 2. Historical background, etc.), and subsections should be numbered 1.1., 1.2., etc. All reviews should contain an introduction section and a conclusion section, with relevant section headings in between. The introduction should explain the importance of the subject, the text should be comprehensive and detailed, and the references should be exhaustive. Review articles should be written with the support of original published studies of the author(s).
Short Communications
Research notes/short communications are short papers that present original and significant material for rapid dissemination. A research note/short communication may focus on a particular aspect of a problem or a new finding that is expected to have a significant contribution to science. Research notes/short communications should be a concise but complete description of a limited investigation that will not be included in a later paper. These should be as completely documented, both by reference to the literature and by description of the experimental procedures employed, as a regular paper. Research notes/short communications should be no longer than 15 pages, should have an abstract of 300 words at most, and are limited to 30 references and to 5 figures and tables combined. Research notes/short communications should include all relevant study background and contain all of the sections described below, but without section titles or numbers.
Letters to the Editor
Letters to the editor reflect the opinions of other researchers on articles in previously published issues of the same journal. Typically, letters address the contents of an original journal article for one or more of the following reasons: to identify errors and make a correction, provide an alternate theory, provide additional information, offer additional evidence, or provide a counterpoint. The letter should be brief and concise. Letters to the editor should not exceed 800 words and 10 references. Letters are always written to the editor; they are never addressed to the authors of the article in question. While writing a letter, one should avoid assuming a personal and biased attitude or the use of aggressive language. All suggestions should be supported by scientific data. General comments not reinforced by logical arguments are not acceptable (e.g., “I think that this is a very important article” or “I think that this article is worthless”). Reference formatting should be used in letters; however, all of the references used should be published works. Materials that were not published or reported elsewhere should not be used. Otherwise, the letter will not be accepted. The writer should not repeat the original article at length in his/her letter.

A copyright form must also be submitted in order for the letter to be published.

Only letters submitted within 4 months of the original publication date will be considered. The reason for this is that corrections to the record should be done in a timely manner. If there will be a reply to the letter, the next step is to designate which issue of the journal it will be published in. Thus, letters are not necessarily published in the very next issue since it may take some time for the original author to reply. The letter authors’ names and affiliations should be written clearly at the top of the letter, and the title of the article about which the letter is written should be clearly stated in the introduction of the letter.

Manuscript Content

Abstract
This template contains the manuscript preparation guideline of Advances in Artificial Intelligence Research. In this section a short abstract indicating the novelty and main findings of the work should be written. The text of abstract should be written fully justified, in italics and 8 pt. The abstract should include approximately 100-250 words and should not contain any non-common abbreviations and citations. The number of keywords should be between 3 and 6.

Introduction
Advances in Artificial Intelligence Research (AAIR) is a multidisciplinary journal that includes fundamental Artificial Intelligence (AI) areas. AAIR aims at disseminating recent advances in engineering and science to researchers, engineers and related readers. AAIR, in which both theoretical and experimental engineering studies take place, encourages the publication of the articles from challenging areas of engineering and concentrates on the publication of the interdisciplinary AI studies.

This template, which is prepared to help the authors, can be downloaded from the web site of the journal. The papers must be prepared in MS-Word® 2007 or its further releases.

Page Format
The preparation rules given below should be followed. It is recommended that you use this document as template in order to meet the specifications for the format of AAIR.

Page Layout
The size of the papers must be in A4 (210 x 297 mm). Margins must be 30 mm from top, 25 mm from bottom, 15 mm from left and 15 mm from right. Except for the title section of the paper, the page-width figures and tables, the main text must be in double columns 85 mm each. There must be a 10 mm space between the columns.

The main title of the paper should be written in both English and Turkish. The size of the title should be 14 pt and centered.

Only initial letters of the first names and whole of the surnames of the authors must be capital letters. There must be a 10 pt space after the full name of each author. Affiliations of the authors must be given in order of appearance and each individual affiliation must be given in a separate row together with the e-mails of the authors. If there are more than one author who have the same affiliation, their e-mail addresses should be given in order of their names. There must be an 8 pt space between the last e-mail address and the reception/acceptance date information of the paper.

Abbreviations should be spelled out in full at their first occurrence in the text.

Titles
All headings should be written in Cambria font. Level-1 headings must be bold, centered and 11 pt, and should begin with capital letters. Level-2, Level-3 and Level-4 headings must be in the same format as Level-1 headings but they should be 9 pt and justified to the left. No headings should be used further than level-4.

Fonts
Main text should be written in Cambria font and 9 pt, justified. In special cases, e.g. making an emphasis, italic or bold characters can also be used.

Equations
Each equation should be written in a separate row and be enumerated. Equations must be given in the 1x2 tables with hidden borders, where the width of the first cell is 90% and the width of the second cell is 10%. The equation in the first cell should be centered and the equation number in the second cell should be justified to the right. Left and right margins of the cells must be zero. All equations should be written in MS-Word® 2007 and further releases equation editor. Equations which cannot be fitted into a single row can be expressed in more than one row. When necessary, an equation can be given within the main text as long as it is shorter than a single row. Equation editor should be used also in the writing of the equations within the main text or the variables used in the equations. Numbers and their related units used in the text should be in the same line.

Figures
All figures should be centered in the column, but if a figure is large to the extent that it covers double column, then it should be centered according to the page. Figure captions must be below the figures as illustrated in Fig. 1.


Figure 1. An example figure.

If a figure is wider than a single column, it may be given as to cover two columns and it should be placed at the top or bottom of the page. All original or modified figures taken from other sources must be cited.

Tables
Depending on the purpose of use, other types of tables can also be used in the text. Caption of the table should be given above the table.

If a table is wider than a single column it should be placed at the top or bottom of the page. All citations to the tables, figures and equations in the text must be expressed as in the template. If more than one tables, figures or equations are cited, punctuations of “,” and “-” can be used.

Hyperlinks
Hyperlinks can be used in the paper. Hyperlinks can be utilized as the links (documents, audio, multi-media etc.) that provide more information about the related topic. Font type of a hyperlink must be same as that of the main text but it should be underlined.

Page Numbers
Page numbers should not be inserted into the paper. Headers and footers should not be used in the paper. Such arrangements are to made by AAIR staff.

Citations
Citations in the text should be given by numbers in square brackets. The list of references should be given at the end of the paper in order of their first appearance in the text. Use individual sets of square brackets for citation numbers that appear together. For instance, the expression [1],[2],[5] cites the references 1, 2 and 5; similarly, the expression [3]-[9] cites all the references from 3 to 9. In this context, the section of references should be arranged as given in Section 5. In Section 5, [1],[2] correspond to peer reviewed journal papers, [3],[4] books, [5] section in book, [6],[7] conference proceedings, [8],[9] theses/dissertations, [10],[11] reports, and [12] internet hyperlinks.

Conclusion
This template can be downloaded from the web site of Advances in Artificial Intelligence Research (AAIR). Publishing Coordinators of AAIR thank to all authors for preparing their papers in conformity with this template.

Acknowledgment
Editors and Publishing Coordinators of AAIR thank to all authors and reviewers for their contributions.

References
[1] Bennert T, Hanson D, Maher A. “Influence of Pavement Surface Type on Tire/Pavement Generated Noise”. Journal of Testing & Evaluation, 33(2), 94-100, 2005.
[2] Erdoğan M, Tekin R, Kaya M. “Mikrodalga Fırında Suni Yaşlandırılan 6013 Alüminyum Alaşımın Korozyon Davranışının İncelenmesi”. Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi, 20(1), 25-30, 2014.
[3] Haupt RL, Haupt SE. Practical Genetic Algorithms. 2nd ed. New York, NY, USA, Wiley, 2004.
[4] Erkek C, Ağıralioğlu N. Su Kaynakları Mühendisliği. Altıncı baskı. İstanbul, Türkiye, Beta, 2010.
[5] Poore JH, Lin L, Eschbach R, Bauer T. Automated statistical testing for embedded systems. Editors: Zander J, Schieferdecker I, Mosterman PJ. Model-Based Testing for Embedded Systems, 111–146, Boca Raton, FL, USA, CRC Press, 2012.
[6] Li RTH, Chung SH. “Digital Boundary Controller for Single-Phase Grid-Connected CSI”. IEEE 2008 Power Electronics Specialists Conference, Rhodes, Greece, 15–19 June 2008.
[7] Yeğen B, Önöz B, Altıparmak B, Bilen O, Pala M. “Fırat, Yeşilırmak ve Kızılırmak Havzalarında Taşkınların Mevsimselliğinin Belirlenmesi”. Altıncı Ulusal Hidroloji Kongresi, Denizli, Türkiye, 22-24 Eylül 2010.
[8] Boynukalın Z. Emotion Analysis of Turkish Texts by Using Machine Learning Methods. MSc Thesis, Middle East Technical University, Ankara, Turkey, 2012.
[9] Ceylan H. Şehiriçi Ulaşım Ağlarının Armoni Araştırması Optimizasyon Tekniği ile Tasarımı. Doktora Tezi, Pamukkale Üniversitesi, Denizli, Türkiye, 2009.
[10] Diament P, Lupatkin WL. “V-line Surface-Wave Radiation and Scanning”. Department of Electrical Engineering, Columbia University, New York, USA, Scientific Report, 85, 1991.
[11] Devlet Planlama Teşkilatı. “Devlet Yardımlarını Değerlendirme Özel İhtisas Komisyonu Raporu”. Devlet Planlama Teşkilatı, Ankara, Türkiye, 2681, 2004.
[12] Türk Standartları Enstitüsü. “Standart Arama”. https://intweb.tse.org.tr/standard/standard/standardara.aspx (21.12.2014).

Appendix A
Appendices should be given by classifying them. If necessary, they may begin on a separate page.