ANALYTICAL DETERMINATION OF BUCKLING LOAD IN A LAMINATED COMPOSITE PLATE WITH EMBEDDED DELAMINATION

Year 2015, , 45 - 55, 01.06.2015

Lalitha Chattopadhyay

https://doi.org/10.24107/ijeas.251243

Cited By: 2

Abstract

Analytical solution for critical buckling loads in a laminated composite plate with an embedded delamination is obtained using energy based approach. The effect of fiber orientation and delamination size on the local buckling load is calculated. Critical buckling load decreases with increase in the fiber orientation angle and delamination size and the results are in good agreement with the literature results

Keywords

Buckling load, circular delamination, analytical solution, composite plate

References

• Whitcomb JD, Shivakumar KN. Strain-energy release rate analysis of plates with postbuckled delaminations. J Compos Mater,Vol.23, pp.714–34, 1989.
• Nilsson KF, Asp LE, Alpman JE, Nystedt L. Delamination buckling and growth for delaminations at different depths in a slender composite panel. Int J Solids Struct,Vol.38, pp.3039–3071,2001.
• Riccio A, Perugini P, Scaramuzzino F. Modelling compressive behavior of delaminated composite panels. J Comput Struct,Vol.78, pp.73–81,2000.
• Tafreshi A, Oswald T. Global buckling behavior and local damage propagation in composite plates with embedded delaminations. Int J Pressure Vessels Piping 2003, Vol.80,pp.9–20.
• Wagner W, Gruttman F, Sprenger W. A finite element formulation for the simulation of propagating delaminations in layered composite structures. Int J Numer Methods Eng,Vol.51, pp.1337–1359,2001.
• Kim JS, Cho M.“Buckling analysis for delaminated composites using plate bending elements based on higher-order zig-zag theory”, Int J Numer Methods Eng, Vol.55, pp.1323–1343,2002.
• Meng-Kao Yeh and Chung-Ming Tan, “Buckling of Elliptically Delaminated Composite Plates” , Journal of Composite Materials, Vol. 28, pp. 36-52, 1994.
• Kim H-J., “Postbuckling analysis of composite laminates with a delamination”. Computers and StructuresVol. 62(6),pp.975–983,(1997).
• Ning Hu, “Buckling analysis of delaminated laminates with consideration of contact in buckling mode”, Int. J.Numer Methods Eng, Vol.44,pp. 1457–1479, 1999.
• Haitao Han, Zixing Lu , Jordan Zheng Zhang , and Junhong Guo, “Delamination Analysis of Composite Laminates Using an Advanced Beam Theory”, Mechanics of Advanced Materials and Structures (2013) Vol.20, pp.101–113
• Masoud Sistaninia, M. R. Ayatollahi, and Meisam Sistaninia, “On Fracture Analysis of Cracked Graphite Components under Mixed Mode Loading”, Mechanics of Advanced Materials and Structures (2014) 21, 781–791